Vacuum Cups and Suction Cups
P-Series – U Universal Vacuum Cups and Suction Cups

Vacuum Cup Materials

  • The standard materials are Nitrile and Silicone (as noted below each part number).

  • For more information on the materials, click here.

For general purpose use on flat or slightly curved surfaces. Available in sizes from 0.21 to 2.03 inches (5.2 to 51.6 mm)

NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications.

3D Content Central TraceParts

Product
Photo
(Click to Enlarge)

ANVER and P-Series
Description
and Part No.

Connection
Thread Size
Static 
Diameter*
in.
(mm)
Compressed
Diameter*
in.
(mm)
Static
Height*
in.
(mm)
Compressed
Height*
in.
(mm)
Load Capacity
at 24 in. Hg
(609.6mm Hg)
[2:1 Safety Factor]
Pull-Off
Capacity
at 27 in. Hg
(685.8mm Hg)
[1:1 Safety Factor]
lb
(kg)
Level
Compensator
Suspensions
(Click Image for
More Info)
U4 Cups
3D 3D A-3150114

U4-NEO
(Nitrile)
A-3150114
31.50.114

U4.10

N/A 0.21
(5.2)
0.22
(5.5)
0.26
(6.6)
0.25
(6.4)
67
grams
0.29
(0.13)
ANVER SLSA-1 Level Compensator Suspensions
3D 3D A-3150114S

U4-SIT
(Translucent Silicone)
A-3150114S
31.50.114S

U4.20

N/A 0.21
(5.2)
0.22
(5.5)
0.26
(6.6)
0.25
(6.4)
67
grams
0.29
(0.13)
ANVER SLSA-1 Level Compensator Suspensions
U4 Cups with 4-8 Fitting Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150059

U4-NEO/FITTING
(Nitrile)
A-3150059
31.50.059

U4.10.01AB

M5 Male 0.21
(5.2)
0.22
(5.5)
N/A N/A 59
grams
0.29
(0.13)
ANVER SLSA-1 Level Compensator Suspensions
  3D A-3150059S

U4-SIT/FITTING
(Translucent Silicone)
A-3150059S
31.50.059S

U4.20.01AB

M5 Male 0.21
(5.2)
0.22
(5.5)
N/A N/A 59
grams
0.29
(0.13)
ANVER SLSA-1 Level Compensator Suspensions
Fittings for U4 Cups Notes Suspensions

 

3D 3D BF3-OR BF3-OR

The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market.

ANVER SLSA-1 Level Compensator Suspensions

 

3D 3D BF3-SHEX

The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market.

ANVER SLSA-1 Level Compensator Suspensions
U6 Cups Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
3D 3D A-3150115

U6-NEO
(Nitrile)
A-3150115
31.50.115

U6.10

N/A 0.28
(7.1)
0.29
(7.4)
0.28
(7.2)
0.26
(6.6)
120
grams
0.56
(0.25)
ANVER SLSA-1 Level Compensator Suspensions
3D 3D A-3150115S

U6-SIT
(Translucent Silicone)
A-3150115S
31.50.115S

U6.20

N/A 0.28
(7.1)
0.29
(7.4)
0.28
(7.2)
0.26
(6.6)
120
grams
0.56
(0.25)
ANVER SLSA-1 Level Compensator Suspensions
U6 Cups with 4-8 Fitting Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150003

U6-NEO/FITTING
(Nitrile)
A-3150003
31.50.003

U6.10.01AB

M5 Male 0.28
(7.1)
0.29
(7.4)
N/A N/A 113
grams
0.56
(0.25)
ANVER SLSA-1 Level Compensator Suspensions
  3D A-3150003S

U6-SIT/FITTING
(Translucent Silicone)
A-3150003S
31.50.003S

U6.20.01AB

M5 Male 0.28
(7.1)
0.29
(7.4)
N/A N/A 113
grams
0.56
(0.25)
ANVER SLSA-1 Level Compensator Suspensions
Fitting for U6 Cups Notes Suspensions

 

3D 3D BF3-OR BF3-OR

The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market.

ANVER SLSA-1 Level Compensator Suspensions

 

3D 3D BF3-SHEX

The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market.

ANVER SLSA-1 Level Compensator Suspensions
U8 Cups Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
3D 3D A-3150116

U8-NEO
(Nitrile)
A-3150116
31.50.116

U8.10

N/A 0.36
(9.0)
0.38
(9.7)
0.27
(6.8)
0.23
(5.8)
170
 grams
1.69
(0.77)
ANVER SLSA-1 Level Compensator Suspensions
3D 3D A-3150116S

U8-SIT
(Translucent Silicone)
A-3150116S
31.50.116S

U8.20

N/A 0.36
(9.0)
0.38
(9.7)
0.27
(6.8)
0.23
(5.8)
170
 grams
1.69
(0.77)
ANVER SLSA-1 Level Compensator Suspensions
U8 Cups with 4-8 Fitting Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150004

U8-NEO/FITTING
(Nitrile)
A-3150004
31.50.004

U8.10.01AB

M5 Male 0.38
(9.7)
0.39
(10.0)
N/A N/A 177
grams
0.87
(0.39)
ANVER SLSA-1 Level Compensator Suspensions
  3D A-3150004S

U8-SIT/FITTING
(Translucent Silicone)
A-3150004S
31.50.004S

U8.20.01AB

M5 Male 0.38
(9.7)
0.39
(10.0)
N/A N/A 177
grams
0.87
(0.39)
ANVER SLSA-1 Level Compensator Suspensions
Fitting for U8 Cups Notes Suspensions

 

3D 3D BF3-OR BF3-OR

The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market.

ANVER SLSA-1 Level Compensator Suspensions

 

3D 3D BF3-SHEX

The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market.

ANVER SLSA-1 Level Compensator Suspensions
U10 Cups Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
3D 3D A-3150117

U10-NEO
(Nitrile)
A-3150117
31.50.117

U10.10

N/A 0.44
(11.1)
0.44
(11.1)
0.42
(10.5)
0.39
(9.9)
325
grams
1.50
(0.68)
ANVER SLSA-1 Level Compensator Suspensions
3D 3D A-3150117S

U10-SIT
(Translucent Silicone)
A-3150117S
31.50.117S

U10.20

N/A 0.44
(11.1)
0.44
(11.1)
0.42
(10.5)
0.39
(9.9)
325
grams
1.50
(0.68)
ANVER SLSA-1 Level Compensator Suspensions
U10 Cups with 10-15 Fitting Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150005

U10-NEO/FITTING
(Nitrile)
A-3150005
31.50.005

U10.10.01AC

M5 Male 0.44
(11.1)
0.44
(11.1)
N/A N/A 304
grams
1.50
(0.68)
ANVER SLSA-1 Level Compensator Suspensions
  3D A-3150005S

U10-SIT/FITTING
(Translucent Silicone)
A-3150005S
31.50.005S

U10.20.01AC

M5 Male 0.44
(11.1)
0.44
(11.1)
N/A N/A 304
grams
1.50
(0.68)
ANVER SLSA-1 Level Compensator Suspensions
Fitting for U10 Cups Notes Other Fittings Suspensions
    BM5 BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
    BM10-32-OR

10-32 FITTING UNF MALE

BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Popular alternate fitting for the North American market.

Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
U15 Cups Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
3D 3D A-3150118

U15-NEO
(Nitrile)
A-3150118
31.50.118

U15.10

N/A 0.65
(16.6)
0.70
(17.6)
0.48
(12.0)
0.38
(9.5)
1.1 lbs
(0.49 Kg)
2.47
(1.12)
ANVER SLSA-1 Level Compensator Suspensions
3D 3D A-3150118S

U15-SIT
(Translucent Silicone)
A-3150118S
31.50.118S

U15.20

N/A 0.65
(16.6)
0.70
(17.6)
0.48
(12.0)
0.38
(9.5)
1.1 lbs
(0.49 Kg)
2.47
(1.12)
ANVER SLSA-1 Level Compensator Suspensions
U15 Cups with Fitting Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150006

U15-NEO/FITTING
(Nitrile)
A-3150006
31.50.006

U15.10.01AC

M5 Male 0.65
(16.6)
0.70
(17.6)
N/A N/A 1.1 lbs
(0.49 Kg)
2.47
(1.12)
ANVER SLSA-1 Level Compensator Suspensions
  3D A-3150006S

U15-SIT/FITTING
(Translucent Silicone)
A-3150006S
31.50.006S

U15.20.01AC

M5 Male 0.65
(16.6)
0.70
(17.6)
N/A N/A 1.1 lbs
(0.49 Kg)
2.47
(1.12)
ANVER SLSA-1 Level Compensator Suspensions
Fitting for U15 Cups Notes Other Fittings Suspensions
    BM5 BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
    BM10-32-OR

10-32 FITTING UNF MALE

BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Popular alternate fitting for the North American market.

Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
U20 Cups Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
3D 3D A-3150119

U20-NEO
(Nitrile)
A-3150119
31.50.119

U20.10

N/A 0.86
(21.8)
0.90
(22.9)
0.30
(7.6)
0.20
(5.1)
2.0 lbs
(0.9 Kg)
3.60
(1.63)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions

 

3D 3D A-3150119S

U20-SIT
(Translucent Silicone)
A-3150119S
31.50.119S

U20.20

N/A 0.86
(21.8)
0.90
(22.9)
0.30
(7.6)
0.20
(5.1)
2.0 lbs
(0.9 Kg)
3.60
(1.63)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U20 Cups with 20-30 Fitting Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150007A

U20-NEO/1PC FITTING
(Nitrile)
A-3150007A
31.50.007A

U20.10.02AD

G 1/8″ Male M5 Female 0.86
(21.8)
0.90
(22.9)
N/A N/A 1.60 lbs
(0.73 Kg)
3.60
(1.63)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  3D A-3150007SA

U20-SIT/1PC FITTING
(Translucent Silicone)
A-3150007SA
31.50.007SA

U20.20.02AD

G 1/8″ Male M5 Female 0.86
(21.8)
0.90
(22.9)
N/A N/A 1.60 lbs
(0.73 Kg)
3.60
(1.63)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U20 Cups with 20-30 Connection Plate Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150007

U20-NEO/FIT/SCREEN
(Nitrile)
A-3150007
31.50.007

U20.10.02AF

G 1/8″ Male M5 Female 0.86
(21.8)
0.90
(22.9)
N/A N/A 1.60 lbs
(0.73 Kg)
3.60
(1.63)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  3D A-3150007S

U20-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150007S
31.50.007S

U20.20.02AF

G 1/8″ Male M5 Female 0.86
(21.8)
0.90
(22.9)
N/A N/A 1.60 lbs
(0.73 Kg)
3.60
(1.63)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
Fittings for U20 Cups Notes Suspensions
    A-3150196

 20-30 FITTING

A-3150196
 31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" Adapter
ANVER SLSA-2 Level Compensator Suspensions
    A-0101084

STRENGTHENING 
RING SILICONE 20/30

A-0101084
01.01.084S

The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
    A-3150141

20-30 CONNECTION PLATE

A-3150141
31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" Adapter
ANVER SLSA-2 Level Compensator Suspensions
    A-3150140

 20-30 LOCKING SPACER

A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U30 Cups Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
3D 3D A-3150120P

U30-NEO
(Nitrile)
A-3150120P
31.50.120P

U30.30

N/A 1.26
(31.9)
1.29
(32.7)
0.40
(10.1)
0.21
(5.3)
2.98 lbs
(1.35 Kg)
6.70
(3.04)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
3D 3D A-3150120S

U30-SIT
(Translucent Silicone)
A-3150120S
31.50.120S

U30.20

N/A 1.26
(31.9)
1.29
(32.7)
0.40
(10.1)
0.21
(5.3)
2.98 lbs
(1.35 Kg)
6.70
(3.04)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U30 Cups with 20-30 Fitting Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150008PA

U30-NEO/1PC FITTING
(Nitrile)
A-3150008PA
31.50.008PA

U30.30.02AF

G 1/8″ Male M5 Female 1.26
(31.9)
1.29
(32.7)
N/A N/A 2.98 lbs
(1.35 Kg)
6.70
(3.04)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  3D A-3150008SA

U30-SIT/1PC FITTING
(Translucent Silicone)
A-3150008SA
31.50.008SA

U30.20.02AF

G 1/8″ Male M5 Female 1.26
(31.9)
1.29
(32.7)
N/A N/A 2.98 lbs
(1.35 Kg)
6.70
(3.04)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U30 Cups with 20-30 Connection Plate Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150008

U30-NEO/FIT/SCREEN
(Nitrile)
A-3150008
31.50.008

G 1/8″ Male M5 Female 1.26
(31.9)
1.29
(32.7)
N/A N/A 2.98 lbs
(1.35 Kg)
6.70
(3.04)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  3D A-3150008S

U30-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150008S
31.50.008S

G 1/8″ Male M5 Female 1.26
(31.9)
1.29
(32.7)
N/A N/A 2.98 lbs
(1.35 Kg)
6.70
(3.04)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
Fittings for U30 Cups Notes Suspensions
    A-3150196

 20-30 FITTING

A-3150196
 31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" Adapter
ANVER SLSA-2 Level Compensator Suspensions
    A-0101084

STRENGTHENING 
RING SILICONE 20/30

A-0101084
01.01.084S

The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
    A-3150141

20-30 CONNECTION PLATE

A-3150141
31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" Adapter
ANVER SLSA-2 Level Compensator Suspensions
    A-3150140

 20-30 LOCKING SPACER

A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U40 Cups Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
3D 3D A-3150122P

U40-NEO
(Nitrile)
A-3150122P
31.50.122P

U40-2.30

N/A 1.65
(41.9)
1.73
(43.9)
0.53
(13.5)
0.32
(8.1)
7.2 lbs
(3.3 Kg)
11.00
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
3D 3D A-3150122S

U40-SIT
(Translucent Silicone)
A-3150122S
31.50.122S

U40-2.20

N/A 1.65
(41.9)
1.73
(43.9)
0.53
(13.5)
0.32
(8.1)
7.2 lbs
(3.3 Kg)
11.00
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
U40 Cups with 40/30-2/BL30 Fitting Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150032PA

U40-NEO/1PC FITTING
(Nitrile)
A-3150032PA
31.50.032PA

U40-2.30.04AA

G 1/8″ Female 1.65
(41.9)
1.73
(43.9)
N/A N/A 4.89 lbs
(2.22 Kg)
11.00
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
  3D A-3150032SA

U40-SIT/1PC FITTING
(Translucent Silicone)
A-3150032SA
31.50.032SA

U40.2.20.04AA

G 1/8″ Female 1.65
(41.9)
1.73
(43.9)
N/A N/A 4.89 lbs
(2.22 Kg)
11.00
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
U40 Cups with 40 Connection Plate Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150032P

U40-NEO/FIT/SCREEN
(Nitrile)
A-3150032P
31.50.032P

U40-2.30.04AG

G 1/8″ Female 1.65
(41.9)
1.73
(43.9)
N/A N/A 4.89 lbs
(2.22 Kg)
11.00
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
  3D A-3150032S

U40-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150032S
31.50.032S

U40-2.20.04AG

G 1/8″ Female 1.65
(41.9)
1.73
(43.9)
N/A N/A 4.89 lbs
(2.22 Kg)
11.00
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
Fittings for U40 Cups Notes Suspensions
    A-3250001

 40/30-2/BL30 FITTING

A-3250001
32.50.001

04AG

The 40/30-2/BL30 FITTING uses a Strengthening Ring 40. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

ANVER SLSA-2 Level Compensator Suspensions
    A-0101085

STRENGTHENING
 RING SILICONE 40

A-0101085
01.01.085S

The Strengthening Ring 40 is used with the above 40/30-2/BL30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-2 Level Compensator Suspensions
    A-3150143

 40 CONNECTION PLATE

A-3150143
31.50.143

The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

ANVER SLSA-2 Level Compensator Suspensions
    A-3150142

 40 LOCKING SPACER

A-3150142
31.50.142

The 40 Locking Spacer is used with the above 40 Connection Plate. It presses in from the bottom.

ANVER SLSA-2 Level Compensator Suspensions
U50 Cups Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
3D 3D A-3150121P

U50-NEO
(Nitrile)
A-3150121P
31.50.121P

U50-2.30

N/A 2.03
(51.6)
2.12
(53.8)
0.70
(17.7)
0.40
(10.1)
8.89 lbs
(4.0 Kg)
20.00
(9.07)
ANVER SLSA-2 Level Compensator Suspensions
3D A-3150121S

U50-SIT
(Translucent Silicone)
A-3150121S
31.50.121S

U50-2.20

N/A 2.03
(51.6)
2.12
(53.8)
0.70
(17.7)
0.40
(10.1)
8.89 lbs
(4.0 Kg)
20.00
(9.07)
ANVER SLSA-2 Level Compensator Suspensions
U50 Cups with 50/50-2 Fitting Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150009PA

U50-NEO/1PC FITTING
(Nitrile)
A-3150009PA
31.50.009PA

U50-2.30.05AG

G 1/8″ Female 2.03
(51.6)
2.12
(53.8)
N/A N/A 8.89 lbs
(4.0 Kg)
20.00
(9.07)
ANVER SLSA-2 Level Compensator Suspensions
  3D A-3150009SA

U50-SIT/1PC FITTING
(Translucent Silicone)
A-3150009SA
31.50.009SA

U50-2.20.05AG

G 1/8″ Female 2.03
(51.6)
2.12
(53.8)
N/A N/A 8.89 lbs
(4.0 Kg)
20.00
(9.07)
ANVER SLSA-2 Level Compensator Suspensions
U50 Cups with 50 Connection Plate Connection Thread Size Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
  3D A-3150009P

U50-NEO/FIT/SCREEN
(Nitrile)
A-3150009P
31.50.009P

G 1/8″ Female 2.03
(51.6)
2.12
(53.8)
N/A N/A 8.89 lbs
(4.0 Kg)
20.00
(9.07)
ANVER SLSA-2 Level Compensator Suspensions
  3D A-3150009S

U50-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150009S
31.50.009S

G 1/8″ Female 2.03
(51.6)
2.12
(53.8)
N/A N/A 8.89 lbs
(4.0 Kg)
20.00
(9.07)
ANVER SLSA-2 Level Compensator Suspensions
Fittings for U50 Cups Notes Suspensions
    50/50-2 FITTING
A-05AG
05AG
(Replaces A-3250002)
32.50.002

The 50/50-2 Fitting is utilized with a Strengthening Ring 50. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

ANVER SLSA-2 Level Compensator Suspensions
    A-0101086

STRENGTHENING
 RING SILICONE 50

A-0101086
01.01.086S

The Strengthening Ring 50 is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-2 Level Compensator Suspensions
    A-3150145

 50 CONNECTION PLATE

A-3150145
31.50.145

The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

ANVER SLSA-2 Level Compensator Suspensions
    A-3150144

50 LOCKING SPACER

A-3150144
31.50.144

The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom.

ANVER SLSA-2 Level Compensator Suspensions
Click Here to See More Details of Different Suction Cup and Vacuum Cup Materials

* All cups shown above are identical in size and shape to P-Brand’s cups. The dimensional drawings represent the cup dimensions without a load as given by P-Brand. The ‘compressed’ column specifications are important in making sure that everything fits, and represent the actual size of the cup after full compression (being flattened out) on a level load. (This difference is negligible in the F series.) The bigger the cup the greater the enlargement of the diameter. A lower vacuum level will lessen this compression (or flattening out); however, make sure to leave enough room for the static height of the cup in your design.

 The “G” thread is also known as BSPP, commonly used world-wide for Vacuum Applications.
Generic versions of P-Series U Series Universal Suction Cups

Generic versions of P-Series U Series Universal Suction Cups