Vacuum Cups and Suction Cups
P-Series – D Deep Vacuum Cups and Suction Cups

Vacuum Cup Materials

  • The standard materials are Nitrile and Silicone (as noted below each part number).

  • For more information on the materials, click here.

Ideal for use on curved or irregular surfaces or for lifting across corners and edges. Available in sizes from 0.65 to 2.10 inches (16.5 to 53.0mm).

NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications.

RFQ 3D Content Central Product
Photo

(Click to Enlarge)

ANVER and
P-Series
Description
and Part #

Connection
Thread Size
Static 
Dia.*
in.

(mm)
Maximum
Compressed
Dia.*
in.

(mm)
Static 
Height*
in.

(mm)
Compressed
Height*
in.

(mm)
Load Capacity
at 24 in. Hg
(609.6mm Hg)
[2:1 Safety Factor]

lb
(kg)
Pull-Off Capacity
at 27 in. Hg
(685.8mm Hg)
[1:1 Safety Factor]

lb
(kg)

Level
Compensator
Suspensions
(Click Image for

More Info)

D15 Cups
A-3150135

 D15-NEO
(Nitrile)
A-3150135
31.50.135

D15-2.10
RoHS Compliant

N/A

0.65
(16.5)

0.78
(20.0)

0.65
(16.5)
0.49
(12.4)
1.1 lbs
(0.50 Kg)
2.47
(1.12)
ANVER SLSA-1 Series Suspensions
A-3150135S

D15-SIT
(Translucent Silicone)
 A-3150135S
31.50.135S

D15-2.20
RoHS Compliant

N/A 0.65
(16.5)
0.78
(20.0)
0.65
(16.5)
0.49
(12.4)
1.1 lbs
(0.50 Kg)
2.47
(1.12)
ANVER SLSA-1 Series Suspensions
D15 Cups with Fitting Connection Thread Size Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
  A-3150010

D15-NEO/FITTING
(Nitrile)
 A-3150010
31.50.010

D15-2.20.01AC
RoHS Compliant

M5 Male 0.65
(16.5)
0.78
(20.0)
1.01
(25.5)
0.85
(21.6)
1.1 lbs
(0.50 Kg)
2.47
(1.12)
ANVER SLSA-1 Series Suspensions
  A-3150010S

D15-SIT/FITTING
(Translucent Silicone)
 A-3150010S
31.50.010S

D15-2.20.01AC
RoHS Compliant

M5 Male 0.65
(16.5)
0.78
(20.0)
1.01
(25.5)
0.85
(21.6)
1.1 lbs
(0.50 Kg)
2.47
(1.12)
ANVER SLSA-1 Series Suspensions
Fitting for D15 Cups Notes Other Fittings Suspensions
  BM5 BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

Group 1 Fittings ANVER SLSA-1 Series Suspensions
  BM10-32-OR

10-32 FITTING UNF MALE

BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Comes with captured O-ring for a vacuum tight seal. Popular alternate fitting for the North American market.

Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
D20 Cups Connection Thread Size Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150136

D20-NEO
(Nitrile)
A-3150136
31.50.136

D20-2.10
RoHS Compliant

N/A 0.90
(22.0)
1.10
(28.0)
0.50
(13.0)
0.38
(9.7)
1.8 lbs
(0.82 Kg)
4.00
(1.8)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
A-3150136S

D20-SIT
(Translucent Silicone)
A-3150136S
31.50.136S

D20-2.20
RoHS Compliant

N/A 0.90
(22.0)
1.10
(28.0)
0.50
(13.0)
0.38
(9.7)
1.8 lbs
(0.82 Kg)
4.00
(1.8)

ANVER SLSA-1 Series Suspensions 

SLSA-2 Level Compensator Suspensions
D20 Cups with 20-30 Fitting   Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
  A-3150011A

D20-NEO/1PC FITTING
(Nitrile)
A-3150011A
31.50.011A

D20-2.10.02AF
RoHS Compliant

G 1/8″ Male
M5 Female
0.90
(22.0)
1.10
(28.0)
0.90
(23.0)
0.78
(19.8)
1.8 lbs
(0.82 Kg)
4.00
(1.81)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
  A-3150011SA

D20-SIT/1PC FITTING
(Translucent Silicone)
A-3150011SA
31.50.011SA

D20-2.20.02AF
RoHS Compliant

G 1/8″ Male
M5 Female
0.90
(22.0)
1.10
(28.0)
0.90
(23.0)
0.78
(19.8)
1.8 lbs
(0.82 Kg)
4.00
(1.81)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
D20 Cups with 20-30 Connection Plate Connection Thread Size Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
  A-3150011

D20-NEO/FIT/SCREEN
(Nitrile)
A-3150011
31.50.011
RoHS Compliant

G 1/8″ Male
M5 Female
0.90
(22.0)
1.10
(28.0)
0.80
(21.0)
0.68
(17.1)
1.8 lbs
(0.82 Kg)
4.00
(1.81)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
  A-3150011S

D20-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150011S
31.50.011S
RoHS Compliant

G 1/8″ Male
M5 Female
0.90
(22.0)
1.10
(28.0)
0.80
(21.0)
0.68
(17.1)
1.8 lbs
(0.82 Kg)
4.00
(1.81)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
Fittings for D20 Cups Notes Suspensions
  A-3150196 20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Series Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" Adapter
SLSA-2 Level Compensator Suspensions
  A-0101084

20-30 STRENGTHENING
RING SILICONE

A-0101084
01.01.084S
RoHS Compliant

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
  A-3150141 20-30 CONNECTION PLATE

A-3150141
 31.50.141
RoHS Compliant

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

ANVER SLSA-1 Series Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" Adapter
SLSA-2 Level Compensator Suspensions
  A-3150140 20-30 LOCKING SPACER

A-3150140
31.50.140
RoHS Compliant

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
D30 Cups Connection Thread Size Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150137

D30-NEO
(Nitrile)
A-3150137
31.50.137

D30-2.10
RoHS Compliant

N/A 1.30
(32.0)
1.57
(40.0)
0.75
(19.0)
0.53
(13.5)
3.1 lbs
(1.41 Kg)
7.00
(3.18)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
A-3150137S

D30-SIT
(Translucent Silicone)
A-3150137S
31.50.137S

D30-2.20
RoHS Compliant

N/A 1.30
(32.0)
1.57
(40.0)
0.75
(19.0)
0.53
(13.5)
3.1 lbs
(1.41 Kg)
7.00
(3.18)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
D30 Cups with 20-30 Fitting Connection Thread Size Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
  A-3150137S

D30-NEO/1PC FITTING
(Nitrile)
A-3150012A
31.50.012A

D30-2.10.02AF
RoHS Compliant

G 1/8″ Male
M5 Female
1.30
(32.0)
1.57
(40.0)
1.12
(28.0)
0.99
(25.1)
3.1 lbs
(1.41 Kg)
7.00
(3.18)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
  A-3150012SA

D30-SIT/1PC FITTING
(Translucent Silicone)
A-3150012SA
31.50.012SA

D30-2.20.02AF
RoHS Compliant

G 1/8″ Male
M5 Female
1.30
(32.0)
1.57
(40.0)
1.12
(28.0)
0.99
(25.1)
3.1 lbs
(1.41 Kg)
7.00
(3.18)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
D30 Cups with 20-30 Connection Plate Connection Thread Size Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
  A-3150012

D30-NEO/FIT/SCREEN
(Nitrile)
A-3150012
31.50.012
RoHS Compliant

G 1/8″ Male
M5 Female
1.30
(32.0)
1.57
(40.0)
1.10
(27.0)
0.93
(23.6)
3.1 lbs
(1.41 Kg)
7.00
(3.18)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
  A-3150012S

D30-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150012S
31.50.012S
RoHS Compliant

G 1/8″ Male
M5 Female
1.30
(32.0)
1.57
(40.0)
1.10
(27.0)
0.93
(23.6)
3.1 lbs
(1.41 Kg)
7.00
(3.18)

ANVER SLSA-1 Series Suspensions

SLSA-2 Level Compensator Suspensions
Fittings for D30 Cups Notes Suspensions
  A-3150196 20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

ANVER SLSA-1 Series Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" Adapter
SLSA-2 Level Compensator Suspensions
  A-0101084

20-30 STRENGTHENING
RING SILICONE

A-0101084
01.01.084S
RoHS Compliant

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
  A-3150141 20-30 CONNECTION PLATE

A-3150141
 31.50.141
RoHS Compliant

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

ANVER SLSA-1 Series Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" Adapter
SLSA-2 Level Compensator Suspensions
  A-3150140 20-30 LOCKING SPACER

A-3150140
31.50.140
RoHS Compliant

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
D50 Cups Connection Thread Size Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150138

D50-NEO
(Nitrile)
A-3150138
31.50.138

D50.10
RoHS Compliant

N/A 2.10
(53.0)
2.40
(61.0)
1.22
(31.0)
0.99
(25.1)
9.8 lbs
(4.44 Kg)
22.00
(9.98)

A-3150138S

D50-SIT
(Translucent Silicone)
A-3150138S
31.50.138S

D50.20
RoHS Compliant

N/A 2.10
(53.0)
2.40
(61.0)
1.22
(31.0)
0.99
(25.1)
9.8 lbs
(4.44 Kg)
22.00
(9.98)

D50 Cups with 50/50-2 Fitting Connection Thread Size Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
  A-3150013A

D50-NEO/1PC FITTING
(Nitrile)
A-3150013A
31.50.013A

D50.10.05AG
RoHS Compliant

G 1/8″ Female 2.10
(53.0)
2.40
(61.0)
1.60
(40.0)
1.39
(35.3)
9.8 lbs
(4.44 Kg)
22.00
(9.98)

  A-3150013SA

D50-SIT/1PC FITTING
(Translucent Silicone)
A-3150013SA
31.50.013SA

D50.20.05AG
RoHS Compliant

G 1/8″ Female 2.10
(53.0)
2.40
(61.0)
1.60
(40.0)
1.39
(35.3)
9.8 lbs
(4.44 Kg)
22.00
(9.98)

D50 Cups with 50 Connection Plate Connection Thread Size Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
  A-3150013

D50-NEO/FIT/SCREEN
(Nitrile)
A-3150013
31.50.013
RoHS Compliant

G 1/8″ Female 2.10
(53.0)
2.40
(61.0)
1.60
(40.0)
1.39
(35.1)
9.8 lbs
(4.44 Kg)
22.00
(9.98)
  A-3150013S

D50-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150013S
31.50.013S
RoHS Compliant

G 1/8″ Female 2.10
(53.0)
2.40
(61.0)
1.60
(40.0)
1.39
(35.1)
9.8 lbs
(4.44 Kg)
22.00
(9.98)

Fittings for D50 Cups Notes Suspensions
  50/50-2 FITTING
A-05AG
05AG
(Replaces
A-3250002)
32.50.002

The 50/50-2 Fitting uses a 50 Strengthening Ring. The  50/50-2 Fitting allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

 

A-05AG-18M-G

The A-05AG-18m-G Fitting is utilized with a Strengthening Ring 50. It allows you to screw into any of the SLSA-2 Suspensions using HS18G-18F-G fitting.

  A-0101086

50 STRENGTHENING
 RING SILICONE

A-0101086
01.01.086S
RoHS Compliant

The 50 Strengthening Ring is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

  A-3150145  50 CONNECTION PLATE

A-3150145
31.50.145
RoHS Compliant

The 50 Connection Plate uses a 50 Locking Spacer.  The A-3150145  50 Connection Plate allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

  A-3150144

 50 LOCKING SPACER

A-3150144
31.50.144
RoHS Compliant

The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom.

Click Here to See More Details of Different Suction Cup and Vacuum Cup Materials

* All cups shown above are identical in size and shape to P-Style’s cups. The dimensional drawings represent the cup dimensions without a load as given by P-Style. The ‘compressed’ column specifications are important in making sure that everything fits, and represent the actual size of the cup after full compression (being flattened out) on a level load. (This difference is negligible in the F series.) The bigger the cup the greater the enlargement of the diameter. A lower vacuum level will lessen this compression (or flattening out); however, make sure to leave enough room for the static height of the cup in your design.

 The “G” thread is also known as BSPP, commonly used world-wide for Vacuum Applications.
Generic versions of the P-Series D Series Deep Vacuum Cups