Vacuum Cups and Suction Cups
P-Series
– F Flat Cleated Vacuum Cups and Suction Cups with Cleats

Vacuum Cup Materials

  • The standard materials are Nitrile and Silicone (as noted below each part number).

  • For more information on the materials, click here.

Ideal for use on plane surfaces, where minimum movement is required to maintain the pick-up area, and for support of pliable materials. Available in sizes from 0.65 to 6.13  inches (16.6 to 155.6mm).

NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications.

RFQ 3D Content Central           

Product
Photo
(Click to Enlarge)

ANVER and
P-Series
Description
and Part No.

Connection
Thread Size
Static 
Diameter *
in.

(mm)
Static
Height *
in.

(mm)
Load Capacity
at 24 in. Hg
(609.6mm Hg)
[2:1 Safety Factor]

lb
(kg)
Pull-Off Capacity
at 27 in. Hg
(685.8mm Hg)
[1:1 Safety Factor]

lb
(kg)

Level
Compensator
Suspensions
(Click Image for

More Info)

F15 Cups
A-3150125

F15-NEO
(Nitrile)
A-3150125
31.50.125

F15.10
RoHS Compliant

N/A 0.62
(15.8)
0.47
(12.0)
1.1 lbs
(0.49 Kg)
2.47
(1.12)

ANVER SLSA-1 Level Compensator Suspensions

A-3150125S

F15-SIT
(Translucent Silicone)
A-3150125S
31.50.125S

F15.20
RoHS Compliant

N/A 0.62
(15.8)
0.47
(12.0)
1.1 lbs
(0.49 Kg)
2.47
(1.12)
ANVER SLSA-1 Level Compensator Suspensions
F15 Cups with 10-15 Fitting Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150014

F15-NEO/FITTING
(Nitrile)
A-3150014
31.50.014

F15.10.01AC
RoHS Compliant

M5 Male 0.62
(15.8)
0.6
(14.0)
1.1 lbs
(0.49 Kg)
2.47
(1.12)
ANVER SLSA-1 Level Compensator Suspensions
  A-3150014S

F15-SIT/FITTING
(Translucent Silicone)
A-3150014S
31.50.014S

F15.20.01AC
RoHS Compliant

M5 Male 0.62
(15.8)
0.6
(14.0)
1.1 lbs
(0.49 Kg)
2.47
(1.12)
ANVER SLSA-1 Level Compensator Suspensions
Fitting for F15 Cups Notes Other Fittings Suspensions
  BM5 BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
  BM10-32-OR

10-32 FITTING UNF MALE

BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Comes with captured O-ring for a vacuum tight seal. Popular alternate fitting for the North American market.

Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
F20 Cups Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
A-3150126

F20-NEO
(Nitrile)
A-3150126
31.50.126

F20.10
RoHS Compliant

N/A 0.87
(22.1)
0.30
(7.6)
1.87 lbs
(0.8 Kg)
4.2
(1.91)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
A-3150126S F20-SIT
(Translucent Silicone)
A-3150126S
31.50.126S

F20.20
RoHS Compliant
N/A 0.87
(22.1)
0.30
(7.6)
1.87 lbs
(0.8 Kg)
4.2
(1.91)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
 

A-F20-P60
(Thermo-elastic
Polyurethane)
N/A 0.87
(22.1)
0.30
(7.6)
1.87 lbs
(0.8 Kg)
4.2
(1.91)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
 

A-F20-P30
(Thermo-elastic
Polyurethane)**
N/A 0.87
(22.1)
0.30
(7.6)
1.87 lbs
(0.8 Kg)
4.2
(1.91)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
 

A-F20-P50
(Thermo-elastic
Polyurethane)**

N/A 0.87
(22.1)
0.30
(7.6)
1.87 lbs
(0.8 Kg)
4.2
(1.91)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F20 Cups with 20-30 Fitting Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150015A

F20-NEO/1PC FITTING
(Nitrile)
A-3150015A
31.50.015A

F20.10.02AD
RoHS Compliant

G 1/8″ Male
M5 Female
0.87
(22.1)
0.70
(17.8)
1.87 lbs
(0.85 Kg)
4.2
(1.91)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  A-3150015SA

F20-SIT/1PC FITTING
(Translucent Silicone)
A-3150015SA
31.50.015SA

F20.20.02AD
RoHS Compliant

G 1/8″ Male
M5 Female
0.87
(22.1)
0.70
(17.8)
1.87 lbs
(0.85 Kg)
4.2
(1.91)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F20 Cups with 20-30 Connection Plate Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150015

F20-NEO/FIT/SCREEN
(Nitrile)
A-3150015
31.50.015

F20.10.02AF

G 1/8″ Male
M5 Female
0.87
(22.1)
0.70
(17.8)
1.87 lbs
(0.85 Kg)
4.2
(1.91)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  A-3150015S

F20-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150015S
31.50.015S

F20.20.02AF
RoHS Compliant

G 1/8″ Male
M5 Female
0.87
(22.1)
0.70
(17.8)
1.87 lbs
(0.85 Kg)
4.2
(1.91)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
Fitting for F20 Cups Notes Suspensions
  A-3150196 20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" NPS Adapter
ANVER SLSA-2 Level Compensator Suspensions
  A-0101084

20-30 STRENGTHENING
RING SILICONE

A-0101084
01.01.084S

RoHS Compliant

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  A-3150141 20-30 CONNECTION PLATE

A-3150141
 31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" NPS Adapter
ANVER SLSA-2 Level Compensator Suspensions
  A-3150140 20-30 LOCKING SPACER

A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F25 Cups Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
A-3150127

F25-NEO
(Nitrile)
A-3150127
31.50.127

F25.10
RoHS Compliant

N/A 1.08
(27.5)
0.37
(9.4)
2.49 lbs
(1.1 Kg)
5.6
(2.54)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
A-3150127S F25-SIT
(Translucent Silicone)
A-3150127S
31.50.127S

F25.20
RoHS Compliant
N/A 1.08
(27.5)
0.37
(9.4)
2.49 lbs
(1.1 Kg)
5.6
(2.54)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
 

A-3150127S

A-F25-P60
(Thermo-elastic
Polyurethane)
N/A 1.08
(27.5)
0.37
(9.4)
2.49 lbs
(1.13 Kg)
5.6
(2.54)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
 

A-F25-P30
(Thermo-elastic
Polyurethane)**
N/A 1.08
(27.5)
0.37
(9.4))
2.49 lbs
(1.13 Kg)
5.6
(2.54)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
 

A-F25-P50
(Thermo-elastic
Polyurethane)**

N/A 1.08
(27.5)
0.37
(9.4)
2.49 lbs
(1.13 Kg)
5.6
(2.54)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F25 Cups with 20-30 Fitting Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
 

F25-NEO/1PC FITTING
(Nitrile)
A-3150016A
31.50.016A

F25.10.02AF
RoHS Compliant

G 1/8″ Male
M5 Female
1.08
(27.5)
0.70
(17.8)
2.49 lbs
(1.13 Kg)
5.6
(2.54)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
 

F25-SIT/1PC FITTING
(Translucent Silicone)
A-3150016SA
31.50.016SA

F25.20.02AF
RoHS Compliant

G 1/8″ Male
M5 Female
1.08
(27.5)
0.70
(17.8)
2.49 lbs
(1.13 Kg)
5.6
(2.54)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F25 Cups with 20-30 Connection Plate Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
 

F25-NEO/FIT/SCREEN
(Nitrile)
A-3150016
31.50.016

G 1/8″ Male
M5 Female
1.08
(27.5)
0.70
(17.8)
2.49 lbs
(1.13 Kg)
5.6
(2.54)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
 

F25-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150016S
31.50.016S

RoHS Compliant

G 1/8″ Male
M5 Female
1.08
(27.5)
0.70
(17.8)
2.49 lbs
(1.13 Kg)
5.6
(2.54)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
Fitting for F25 Cups Notes Suspensions
  A-3150196AL 20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" NPS Adapter
ANVER SLSA-2 Level Compensator Suspensions
  A-0101084

20-30 STRENGTHENING
RING SILICONE

A-0101084
01.01.084S

RoHS Compliant

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  A-3150141 20-30 CONNECTION PLATE

A-3150141
 31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" NPS Adapter
ANVER SLSA-2 Level Compensator Suspensions
  A-3150140 20-30 LOCKING SPACER

A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F30 Cups Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
A-3150239

F30-NEO
(Nitrile)
A-3150239
31.50.239

F30-2.10
RoHS Compliant

N/A 1.25
(31.6)
0.40
(10.1)
3.1 lbs
(1.4 Kg)
7.0
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
A-3150239S F30-SIT
(Translucent Silicone)
A-3150239S
31.50.239S

F30-2.20
RoHS Compliant
N/A 1.25
(31.6)
0.40
(10.1)
3.1 lbs
(1.4 Kg)
7.0
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  A-F30-P60
(Thermo-elastic
Polyurethane)
N/A 1.25
(31.6)
0.40
(10.1)
3.1 lbs
(1.4 Kg)
7.0
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  A-F30-P30
(Thermo-elastic
Polyurethane)**
N/A 1.25
(31.6)
0.40
(10.1)
3.1 lbs
(1.4 Kg)
7.0
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
 

A-F30-P50
(Thermo-elastic
Polyurethane)**

N/A 1.25
(31.6)
0.40
(10.1)
3.1 lbs
(1.4 Kg)
7.0
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F30 Cups with 20-30 Fitting Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3250036A

F30-NEO/1 PC FITTING
(Nitrile)
A-3250036A
32.50.036A

F30-2.10.02AD
RoHS Compliant

G 1/8″ Male
M5 Female
1.25
(31.6)
0.70
(17.8)
3.1 lbs
(1.4 Kg)
7.0
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  A-3250036SA

F30-SIT/1PC FITTING
(Translucent Silicone)
A-3250036SA
32.50.036SA

F30-2.20.02AD
RoHS Compliant

G 1/8″ Male
M5 Female
1.25
(31.6)
0.70
(17.8)
3.1 lbs
(1.4 Kg)
7.0
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F30 Cups with 20-30 Connection Plate Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3250036

F30-NEO/FIT/SCREEN
(Nitrile)
A-3250036
F30-2.30.02AF

RoHS Compliant

G 1/8″ Male
M5 Female
1.25
(31.6)
0.70
(17.8)
3.1 lbs
(1.4 Kg)
7.0
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  A-3250036S

F30-SIT/FIT/SCREEN
(Translucent Silicone)
A-3250036S
F30-2.20.02AF

RoHS Compliant

G 1/8″ Male
M5 Female
1.25
(31.6)
0.70
(17.8)
3.1 lbs
(1.4 Kg)
7.0
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
Fitting for F30 Cups Notes Suspensions
  A-3150196AL 20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" NPS Adapter
ANVER SLSA-2 Level Compensator Suspensions
  A-0101084

20-30 STRENGTHENING
RING SILICONE

A-0101084
01.01.084S

RoHS Compliant

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
  A-3150141 20-30 CONNECTION PLATE

A-3150141
 31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

HS18G-18FG Double Female G 1/8" NPS Adapter
ANVER SLSA-2 Level Compensator Suspensions
  A-3150140 20-30 LOCKING SPACER

A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F40 Cups Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions

 

A-3150129P

F40-NEO
(Nitrile)
A-3150129P
31.50.129P

F40-2.30

N/A 1.66
(42.1)
0.50
(12.7)
4.89 lbs
(2.22 Kg)
11
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
A-3150129S F40-SIT
(Translucent Silicone)
A-3150129S
31.50.129S

F40-2.20
RoHS Compliant
N/A 1.66
(42.1)
0.50
(12.7)
4.89 lbs
(2.22 Kg)
11
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150129S A-F40-P60
(Thermo-elastic
Polyurethane)
N/A 1.66
(42.1)
0.50
(12.7)
4.89 lbs
(2.22 Kg)
11
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150129S A-F40-P30
(Thermo-elastic
Polyurethane)**
N/A 1.66
(42.1)
0.50
(12.7)
4.89 lbs
(2.22 Kg)
11
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
 

A-F40-P50
(Thermo-elastic
Polyurethane)**

N/A 1.66
(42.1)
0.50
(12.7)
4.89 lbs
(2.22 Kg)
11
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
F40 Cups with 40/30-2/BL30 Fitting Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150018PA

F40-NEO/1PC FITTING
(Nitrile)
A-3150018PA
31.50.018PA

F40-2.30.04AA
RoHS Compliant

G 1/8″ Female 1.66
(42.1)
0.80
(20.3)
4.89
(2.22)
11
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150018SA

F40-SIT/1PC FITTING
(Translucent Silicone)
A-3150018SA
31.50.018SA

F40-2.20.04AA
RoHS Compliant

G 1/8″ Female 1.66
(42.1)
0.80
(20.3)
4.89
(2.22)
11
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
F40 Cups with 40 Connection Plate Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150018P

F40-NEO/FIT/SCREEN
(Nitrile)
A-3150018P
31.50.018P

F40-2.30-04AG
RoHS Compliant

G 1/8″Female 1.66
(42.1)
0.90
(22.9)
4.89
(2.22)
11
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150018S

F40-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150018S
31.50.018S

F40-2.20-04AG
RoHS Compliant

G 1/8″ Female 1.66
(42.1)
0.90
(22.9)
4.89
(2.22)
11
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
Fitting for F40 Cups Notes Suspensions
  A-3250001

40/30-2/BL30 FITTING

A-3250001
32.50.001

04AG

The 40/30-2/BL30 FITTING uses a Strengthening Ring 40. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ NPS Thread.

ANVER SLSA-2 Level Compensator Suspensions
  A-0101085

STRENGTHENING
 RING SILICONE 40

A-0101085
01.01.085S

RoHS Compliant

The Strengthening Ring 40 is used with the above 40/30-2/BL30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-2 Level Compensator Suspensions
  A-3150143

40 CONNECTION PLATE

A-3150143
31.50.143

The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

ANVER SLSA-2 Level Compensator Suspensions
  A-3150142

40 LOCKING SPACER

A-3150142
31.50.142

The 40 Locking Spacer is used with the above 40 Connection Plate. It presses in from the bottom.

ANVER SLSA-2 Level Compensator Suspensions
F50 Cups Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions

 

A-3150130P

F50-NEO
(Nitrile)
A-3150130P
31.50.130P

F50-2.30
RoHS Compliant

N/A 2.10
(53.3)
0.70
(17.7)
9.33 lbs
(4.23 Kg)
21
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
A-3150130S F50-SIT
(Translucent Silicone)
A-3150130S
31.50.130S

F50-2.20
RoHS Compliant
N/A 2.10
(53.3)
0.70
(17.7)
9.33 lbs
(4.23 Kg)
21
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150130S A-F50-P60
(Thermo-elastic
Polyurethane)
N/A 2.10
(53.3)
0.70
(17.7)
9.33 lbs
(4.23 Kg)
21
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150130S A-F50-P30
(Thermo-elastic
Polyurethane)**
N/A 2.10
(53.3)
0.70
(17.7)
9.33 lbs
(4.23 Kg)
21
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150130S A-F50-P50
(Thermo-elastic
Polyurethane)**
N/A 2.10
(53.3)
0.70
(17.7)
9.33 lbs
(4.23 Kg)
21
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
F50 Cups with 50 Fitting Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150019PA

F50-NEO/1PC FITTING
(Nitrile)
A-3150019PA
31.50.019PA

F50-2.30.05AG
RoHS Compliant

G 1/8″ Female 2.10
(53.3)
1.10
(27.9)
9.33 lbs
(4.23 Kg)
21
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150019SA

F50-SIT/1PC FITTING
(Translucent Silicone)
A-3150019SA
31.50.019SA

F50-2.20.05AG
RoHS Compliant

G 1/8″ Female 2.10
(53.3)
1.10
(27.9)
9.33 lbs
(4.23 Kg)
21
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
F50 Cups with 50 Connection Plate Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150019P

F50-NEO/FIT/SCREEN
(Nitrile)
A-3150019P
31.50.019P

RoHS Compliant

G 1/8″ Female 2.10
(53.3)
1.00
(25.4)
9.33 lbs
(4.23 Kg)
21
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
 

A-3150019S

F50-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150019S
31.50.019S

RoHS Compliant

G 1/8″ Female 2.10
(53.3)
1.00
(25.4
9.33 lbs
(4.23 Kg)
21
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
Fitting for F50 Cups Notes Suspensions
 

50/50-2 FITTING
A-05AG
05AG
(Replaces
A-3250002)
32.50.002

The 50/50-2 Fitting is utilized with a Strengthening Ring 50. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

ANVER SLSA-2 Level Compensator Suspensions
 

A-05AG-18M-G

The A-05AG-18m-G Fitting is utilized with a Strengthening Ring 50. It allows you to screw into any of the SLSA-2 Suspensions using HS18G-18F-G fitting.

ANVER SLSA-2 Level Compensator Suspensions
  A-0101086

STRENGTHENING
 RING SILICONE 50

A-0101086
01.01.086S

RoHS Compliant

The Strengthening Ring 50 is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

ANVER SLSA-2 Level Compensator Suspensions
  A-3150145

50 CONNECTION PLATE

A-3150145
31.50.145

The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

ANVER SLSA-2 Level Compensator Suspensions
  A-3150144

50 LOCKING SPACER

A-3150144
31.50.144

The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom.

ANVER SLSA-2 Level Compensator Suspensions
F75 Cups Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions

 

A-3150131P

F75-NEO
(Nitrile)
A-3150131P
F75.30W

RoHS Compliant

N/A 3.02
(76.5)
0.60
(15.2)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
A-3150131S

F75-SIT
(Translucent Silicone)
A-3150131S
F75.20.W

RoHS Compliant

N/A 3.02
(76.5)
0.60
(15.2)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions

A-F75-P50
(Urethane 50)
N/A 3.02
(76.5)
0.60
(15.2)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions

A-F75-P60
(Urethane 60)
N/A 3.02
(76.5)
0.60
(15.2)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions

  A-F75-NM
(NOMATHANE®)
RoHS Compliant
N/A 3.02
(76.5)
0.60
(15.2)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
F75 Cups with 75 Connection Plate Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150037P F75-NEO/CON PLATE
(Nitrile)
A-3150037P
31.50.037P
N/A 3.02
(76.5)
0.60
(15.2)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150037S F75-SIT/CON PLATE
(Translucent Silicone)
A-3150037S
31.50.037S
N/A 3.02
(76.5)
0.60
(15.2)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150037S A-F75-P50/CON PLATE
(Urethane 50)
A-F75-P50-W
N/A 3.02
(76.5)
0.60
(15.2)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
  A-3150037S A-F75-P60/CON PLATE
(Urethane 60)
A-F75-P60-W
N/A 3.02
(76.5)
0.60
(15.2)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions

  A-F75-NM-W
(NOMATHANE®)
N/A 3.02
(76.5)
0.60
(15.2)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
F75 Cups with 75 Fitting Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3250032P

F75-NEO/FIT/SCREEN 1/8
(Nitrile)
A-3250032P
32.50.032P

F75.30.07UA
RoHS Compliant

G 1/8″ Female 3.02
(77.0)
0.80
(20.3)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
  A-3250032S

F75-SIT/FIT/SCREEN 1/8
(Translucent Silicone)
A-3250032S
32.50.032S

F75.20.07UA
RoHS Compliant

G 1/8″ Female 3.02
(77.0)
0.80
(20.3)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
  A-3250032S A-F75-P50/FIT/SCREEN 1/8
(Urethane 50)
A-F75-P50-FIT
G 1/8″ Female 3.02
(77.0)
0.80
(20.3)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
  A-3250032S A-F75-P60/FIT/SCREEN 1/8
(Urethane 60)
A-F75-P60-FIT
G 1/8″ Female 3.02
(77.0)
0.80
(20.3)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions

  A-F75-NM-FIT
(NOMATHANE®)
G 1/8″ Female 3.02
(77.0)
0.80
(20.3)
26.6 lbs
(12.1 Kg)
60
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
Fitting for F75 Cups Notes Suspensions
  A-3150043

75 CONNECTION PLATE 1/8

A-3150043
31.50.043

The 75 Connection Plate 1/8 is to be imbedded in the 75 Series suction cup’s rubber portion allowing the 75 Fitting 1/8″ to be held in place.

ANVER SLSA-2 Level Compensator Suspensions
  A-3250006

75 FITTING 1/8″

A-3250006
32.50.006

07UA

The 75 Fitting 1/8″ with 1/8″ female center port connection with optional M5 (10/32) female port often used as a blow-off port.

ANVER SLSA-2 Level Compensator Suspensions
F110 Cups Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
A-3150132P

F110-NEO
(Nitrile)
A-3150132P
F110.30.W

RoHS Compliant

N/A 4.30
(109.2)
0.8
(20.3)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
  A-3150132S

F110-SIT
(Translucent Silicone)
A-3150132S
F110.20.W

RoHS Compliant

N/A 4.30
(109.2)
0.8
(20.3)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
A-3150132S A-F110-P50
(Urethane 50)
N/A 4.30
(109.2)
0.8
(20.3)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
A-3150132S A-F110-P60
(Urethane 60)
N/A 4.30
(109.2)
0.8
(20.3)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
F110 Cups with 110 Connection Plate Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150038P F110-NEO/CON PLATE
(Nitrile)
A-3150038P
31.50.038P
N/A 4.30
(109.2)
0.8
(20.3)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
  A-3150038S F110-SIT/CON PLATE
(Translucent Silicone)
A-3150038S
31.50.038S
N/A 4.30
(109.2)
0.8
(20.3)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
  A-F110-P50/CON PLATE
(Urethane 50)
A-F110-P50-W
N/A 4.30
(109.2)
0.8
(20.3)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
  A-F110-P60/CON PLATE
(Urethane 60)
A-F110-P60-W
N/A 4.30
(109.2)
0.8
(20.3)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
F110 Cups with 110 Fitting Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150021P

F110-NEO/FIT/SCREEN
(Nitrile)
A-3150021P
31.50.021P

F110.30.11UA
RoHS Compliant

G 1/2″ Female 4.30
(109.2)
1.0
(25.4)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
  A-3150021S

F110-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150021S
31.50.021S

F110.20.11UA
RoHS Compliant

G 1/2″ Female 4.30
(109.2)
1.0
(25.4)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
  F110-P50/FIT/SCREEN
(Urethane 50)
A-F110-P50-FIT
G 1/2″ Female 4.30
(109.2)
1.0
(25.4)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
  A-3150021S F110-P60/FIT/SCREEN
(Urethane 60)
A-F110-P60-FIT
G 1/2″ Female 4.30
(109.2)
1.0
(25.4)
55.6 lbs
(25.2 Kg)
125
(56.7)
ANVER SLSA-3 Level Compensator Suspensions
Fittings for F110 Cups Notes Suspensions
  A-3250007

 110 FITTING 1/2″

A-3250007
32.50.007

11UA

The 110 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port.

ANVER SLSA-3 Level Compensator Suspensions
  A-3150044

 110 CONNECTION PLATE

A-3150044
31.50.044

The 110 Connection Plate is to be imbedded in the 110 Series suction cup’s rubber portion allowing the 110 Fitting 1/2″ to be held in place.

ANVER SLSA-3 Level Compensator Suspensions
F150 Cups Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
A-3150133P

F150-NEO
(Nitrile)
A-3150133P
F150.30.W

RoHS Compliant

N/A 6.13
(155.6)
1.0
(25.4)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
3D A-3150133S

F150-SIT
(Translucent Silicone)
A-3150133S
F150.20.W

RoHS Compliant

N/A 6.13
(155.6)
1.0
(25.4)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
F150-P50
(Urethane 50)
A-F150-P50
N/A 6.13
(155.6)
1.0
(25.4)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
F150-P60
(Urethane 60)
A-F150-P60
N/A 6.13
(155.6)
1.0
(25.4)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
F150 Cups with 150 Connection Plate Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150039P F150-NEO/CON PLATE
(Nitrile)
A-3150039P
31.50.039P
N/A 6.13
(155.6)
1.0
(25.4)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
  A-3150039S F150-SIT/CON PLATE
(Translucent Silicone)
A-3150039S
31.50.039S
N/A 6.13
(155.6)
1.0
(25.4)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
  F150-P50/CON PLATE
(Urethane 50)
A-F150-P50-W
N/A 6.13
(155.6)
1.0
(25.4)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
  F150-P60/CON PLATE
(Urethane 60)
A-F150-P60-W
N/A 6.13
(155.6)
1.0
(25.4)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
F150 Cups with 150 Fitting Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
  A-3150022P

F150-NEO/FIT/SCREEN
(Nitrile)
A-3150022P
31.50.022P

F150.30.15UA
RoHS Compliant

G 1/2″ Female 6.13
(155.6)
1.3
(33)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
 

A-3150022S

F150-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150022S
31.50.022S

F150.20.15UA
RoHS Compliant

G 1/2″ Female 6.13
(155.6)
1.3
(33)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
 

F150-P50/FIT/SCREEN
(Urethane 50)
A-F150-P50-FIT
G 1/2″ Female 6.13
(155.6)
1.3
(33)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
 

F150-P60/FIT/SCREEN
(Urethane 60)
A-F150-P60-FIT
G 1/2″ Female 6.13
(155.6)
1.3
(33)
100 lbs
(45 Kg)
240
(109)
ANVER SLSA-3 Level Compensator Suspensions
Fittings for F150 Cups Notes Suspensions
  A-3150045

 150 CONNECTION PLATE

A-3150045
31.50.045

The 150 Connection Plate is to be imbedded in the 150 Series suction cup’s rubber portion allowing the 150 Fitting 1/2″ to be held in place.

ANVER SLSA-3 Level Compensator Suspensions
  A-3250008

 150 FITTING 1/2″

A-3250008
32.50.008

The 150 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port.

ANVER SLSA-3 Level Compensator Suspensions
Click Here to See More Details of Different Suction Cup and Vacuum Cup Materials

* All cups shown above are identical in size and shape to P-Style’s cups. The dimensional drawings represent the cup dimensions without a load as given by P-Style.
** These are special cups that may require minimum purchase (contact Anver Sales for additional information).

 The “G” thread is also known as BSPP, commonly used world-wide for Vacuum Applications.
Generic versions of the P-Series F Series Flat Vacuum Cups

Generic versions of the P-Series F Series Flat Vacuum Cups
Generic versions of the P-Series F Series Flat Vacuum Cups
More Product Information
ANVER Flat Vacuum Cups with Valves
Flat Vacuum Cups with Valves