Vacuum Pumps and Vacuum Generators
Air Mover Style Vacuum Pumps
FT Series Adjustable Flow Tubes and Transfer Tubes

Air Movers, Air Transfer Tubes, Air Flow Tubes, Vacuum Pumps, Venturis, Vacuum Generators, Ejectors

Precision Made Air Powered Vacuum Pumps with a Very High Flow at a Low Vacuum Level for Specialized Applications

High Vacuum and High Output Flow Using Minimal Compressed Air
The FT Series Adjustable Flow Tubes offer a cost effective method for producing high vacuum and high output flow using a minimal amount of compressed air.

High Vacuum Flow/Material Handling
When used as a vacuum, the FT Series can generate high amounts of flow to quickly remove large volumes of air. This is especially useful for handling porous material (e.g., foam or fabric) where leakage is a problem.

High Output Flow/Blower
When used to produce high output flow, the FT Series is an ideal alternative to expensive electric blowers or raw compressed air lines. Made of aluminum to precise computer numerical control (CNC) machine tolerances. These pumps have an anodized finish for durability, and feature a straight-through bore design that allows material to move from end-to-end without clogging for maintenance-free operation.

Features
• High vacuum and high output flow
• Field adjustable to application
• Low air consumption
• Compact size
• Instant on/off
• No O-rings or gaskets
• No moving parts to clog
• Rugged design for extreme conditions
• Consistent performance
• Safe operation:

  • No electricity at pump
  • No heat generated
  • Explosion proof
Applications
• Air bearing
• Fume removal
• Cooling
• Drying
• Chip and dust removal
• Part ejection
• Automated sheet/paper feeders
• Assembly and palletizers
• Tank purging
• Inflation/deflation
• Conveyor transfer
• Porous pick and place
• Packing delicate or porous products (e.g., foam or felt egg crate sheets, IV bags, perforated metal, fan scrolls, circuit boards)

 

     Air Movers, Air Transfer Tubes, Air Flow Tubes, Vacuum Pumps, Venturis, Vacuum Generators, Ejectors

  • RFQ

    3D Content Central TraceParts

    Product Photo
    (Click to Enlarge)

    Model
    Number

    Bore ID
    in.
    (mm)

    Air
    Usage*
    SCFM
    (l/min.)

    Output*
    SCFM
    (l/min)

    Max. Vac.
    in. Hg
    (mm Hg)

    Amp-
    lification
    Ratio

    A
    in.
    (mm)

    B
    Barb
    in.
    (mm)

    C
    Approx.
    in.
    (mm)

    D
    in.
    (mm)

    E
    Inlet
    Port

    F
    Barb
    in.
    (mm)
    G
    in.
    (mm)

     

    3D FT020

    FT020

    (CDF200H
    KVPCOF200H)

    0.25
    (6.3)

    3
    (85)

    18
    (340)

    5
    (127)

    6:1

    1.32
    (33.4)

    0.53
    (13.5)

    3.75
    (95.3)

    2.10
    (53.5)

    G 1/8″ 1.00
    (25.4)
    0.94
    (24.0)

     

    3D 3D FT050

    FT050 **

    (CDF500H
    CD500H
    KVPCOF500H)

    0.50
    (12.7)

    9
    (255)

    75
    (2124)

    3
    (76)

    8:1

    1.90
    (49.0)

    1.00
    (25.4)

    4.50
    (114.5)

    2.13
    (54.0)

    G 1/4″

    1.50
    (38.1)

    0.94
    (24.0)

     

    3D 3D FT075

    FT075

    (CDF750H
    KVPCOF750H)

    0.75
    (19.1)

    9
    (255)

    110
    (3115)

    1.5
    (38)

    12:1

    2.38
    (60.4)

    1.25
    (31.8)

    4.97
    (126.0)

    2.63
    (66.7)

    G 1/4″ 2.00
    (52.0)
    0.94
    (24.0)

     

    3D 3D FT100

    FT100

    (CDF1000H
    KVPCOF1000H)

    1.00
    (25.4)
    9
    (255)
    145
    (4106)
    1
    (25)
    16:1 2.38
    (60.4)
    1.50
    (38.1)
    4.97
    (126.0)
    2.53
    (64.1)
    G 1/4″ 2.00
    (52.0)
    0.94
    (24.0)

  • RFQ

    3D Content Central TraceParts

    Product Photo
    (Click to Enlarge)

    Model
    Number

    (B)
    Optional
    Hose to Fit Exhaust Barb
    (E)
    Optional
    G to NPT
    Inlet Port Adapter
    (F)
    Optional
    Hose to Fit Incoming Barb
    Optional Clamp
    Mount

     

    3D FT020

    FT020

    (CDF200H
    KVPCOF200H)

    ANVER Hose, 1/2" ID, Clear PVC, Steel Reinforced, Heavy Wall HS50 ANVER Hose, 1" ID, Clear PVC, Steel Reinforced, Standard Wall HS100

     

    3D 3D FT050

    FT050 **

    (CDF500H
    CD500H
    KVPCOF500H)

    ANVER Hose, 1" ID, Clear PVC, Steel Reinforced, Standard Wall HS100 ANVER Hose, 1-1/2" ID, Clear PVC, Steel Reinforced, Standard Wall HS114

     

    3D 3D FT075

    FT075

    (CDF750H
    KVPCOF750H)

    ANVER Hose, 1-1/4" ID, Clear PVC, Steel Reinforced, Standard Wall HS114 ANVER Hose, 2" ID, Clear PVC, Steel Reinforced, Standard Wall HS200

     

    3D 3D FT100

    FT100

    (CDF1000H
    KVPCOF1000H)

    ANVER Hose, 1-1/2" ID, Clear PVC, Steel Reinforced, Standard Wall HS114 ANVER Hose, 2" ID, Clear PVC, Steel Reinforced, Standard Wall HS200

* Air usage and output are based on an input pressure of 80 PSIG.
** Note: Optional CLAMP51P requires tape wrap to fit tightly on FT050.

13600162 A

Air Movers: TT Series Material Transfer Tubes

Pneumatic Conveyors Provide Controlled Feed Rates

The TT Series Transfer Tubes offer a simple, effective, and low cost solution to perform an inline transfer of small or complex shaped objects, bulk material, and powders.

Highly efficient and compact, the TT Series creates an instantaneous and adjustable vacuum flow that is powered by compressed air. The straight-through, smooth bore design allows material to pass directly through the pump at high speeds without clogging. These transfer tubes are made of anodized aluminum and are available in 4 standard models with inside diameters from 3/8″ (9.5mm) to 1″ (25.4mm).


Features
• Instant on/off flow and quick setup
• No O-ring, gaskets, or flap valves
• Maintenance-free operation/no down time
• Compact size
• Safe operation:

  • No electricity at pump
  • No heat generated
  • Explosion proof

Applications

  • Pneumatic conveying
  • Hopper loading
  • Bulk loading
  • Dust removal
  • Trim waste removal

Air Movers. Air Transfer Tubes, Air Flow Tubes, Vacuum Pumps, Venturis, Vacuum Generators, Ejectors
  • RFQ

    3D Content Central TraceParts Product Photo
    (Click to Enlarge)
    Model
    Number

    Bore ID
    in.
    (mm)

    Air
    Usage*
    SCFM (l/min)

    Output* SCFM
    (l/min)

    Max.
    Vacuum
    in. Hg
    (mm Hg)

    Velocity ft/sec
    (m/sec)

    A
    in.
    (mm)

    B
    Barb
    in.
    (mm)

    C
    in.
    (mm)

    D
    in.
    (mm)

    E
    Inlet
    Port

     

    3D 3D TT03

    (DF3-3 D3-3
    KVPDF3-3)

    0.375
    (9.5)

    10
    (283)

    15
    (425)

    6
    (152)

    395
    (120)

    1.25
    (31.8)

    0.75
    (19.1)

    3.75
    (95.3)

    0.50
    (12.7)

    G 1/8″

     

    3D 3D TT05

    (DF5-6 D5-6
    KVPDF5-6)

    0.500
    (12.7)

    24
    (680)

    30
    (850)

    6
    (152)

    360
    (110)

    1.50
    (38.1)

    1.00
    (25.4)

    5.75
    (146.1)

    0.63
    (15.9)

    G 1/4″

     

    3D 3D TT07

    (DF7-6 D7-6
    KVPDF7-6)

    0.750
    (19.1)

    48
    (1359)

    60
    (1699)

    8
    (203)

    325
    (99)

    2.00
    (50.8)

    1.25
    (31.8)

    8.00
    (203.2)

    1.00
    (25.4)

    G 1/4″

     

    3D 3D TT10

    (DF10-3 D10-3
    KVPDF10-3)

    1.00
    (25.4)

    48
    (1359)

    95
    (2690)

    6
    (152)

    290
    (88)

    2.25
    (57.2)

    1.50
    (38.1)

    8.00
    (203.2

    1.00
    (25.4)

    G 1/4″

  • RFQ

    3D Content Central TraceParts Product Photo
    (Click to Enlarge)
    Model
    Number
    Optional
    Hose to Fit Both Barbs
    Optional
    G to NPT
    Inlet Port Adapter
    Optional Clamp
    Mount

     

    3D 3D TT03

    (DF3-3 D3-3
    KVPDF3-3)

    ANVER Hose, 3/4" ID, Clear PVC, Steel Reinforced, Standard Wall HS75

     

    3D 3D TT05

    (DF5-6 D5-6
    KVPDF5-6)

    ANVER Hose, 1" ID, Clear PVC, Steel Reinforced, Standard Wall HS100

     

    3D 3D TT07

    (DF7-6 D7-6
    KVPDF7-6)

    ANVER Hose, 1-1/4" ID, Clear PVC, Steel Reinforced, Standard Wall HS114

     

    3D 3D TT10

    (DF10-3 D10-3
    KVPDF10-3)

    ANVER Hose, 1-1/2" ID, Clear PVC, Steel Reinforced, Standard Wall HS114

* Air usage and Output are based on an input pressure of 80 PSIG.

13600163 A

The “G” thread is also known as BSPP, commonly used world-wide for vacuum applications.


Custom Air Movers

available for OEMs

Click here to go to Air Powered Vacuum Pumps page