Vacuum Generators and Vacuum Stations
Self-Contained Electric Vacuum Stations
VPE3 Series with ANVER VacGuard II™ Vacuum Control System

ANVER VPE3 Series Electric Vac-Pack Vacuum Generator

ANVER’s VPE3 Series Vac-Packs feature dual vacuum ports, an over-sized filter and improved air flow, making them particularly suitable for handling large capacity non-porous loads or semi-porous to porous type loads. Designed for use with a wide assortment of vacuum pad attachments and lifter assemblies, these high quality Vac-Packs are ruggedly designed for heavy production use. Units are available with heavy duty frames, for mounting remotely, and tilting applications.

Safety Features:

  • VacGuard IVacuum Control System
    VacGuard Vacuum Control System This revolutionary solid-state Vacuum Control System combines all the required vacuum generator controls in a rugged, compact polycarbonate enclosure. The VacGuard controls all vacuum pump functions, safety warning lights and a standard VLS-03E audible vacuum leakage warning system.

  • Front Control Panel and Gauges
    All gauges, lights and power switches are mounted on the front of the control panel. The two vacuum gauges on the face of the panel display the level of vacuum in the manifold and in the reservoir. The control pendant clip mounts to the front handle on a 10 ft. coiled cord and provides rapid attach and release functions at the operator’s fingertips.

  • Indicator Lights
    Green light indicates, “safe” vacuum level. Red light indicates, “unsafe” vacuum level.

  • Vacuum Retention
    The system includes an internal check valve to stop loss of vacuum in the event of a power failure (non-porous loads). A 3.5 gallon (822 cu. in.) vacuum reservoir assists in maintaining a safe vacuum level during a power failure (non-porous loads).

  • Thermal Overload Protection
    Heat damage is prevented by a thermal sensor that shuts off the motor if the motor temperature exceeds safe limits.

  • Ergonomic Adjustable Front Handlebar
    Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller size loads.

  • Attach and Release Control Pendant
    Provided with attach and release switch with safety interlock push-button and 10 ft. coil cord.

  • Twist-Lock Power Cord Connectors
    The Twist-lock receptacles, both the male and female are supplied, which helps prevent accidental disconnection from the power source.

  • VLS-03E Audible Vacuum Loss Sensor Warning System (Standard)
    Integrated Electronically controlled vacuum loss sensor monitors vacuum level and will sound an alarm if a slow vacuum leak is present when vacuum level drops to a pre-determined set-point.

Maintenance:

  • Bottom Hinged Front and Back Covers
    Both the front and back covers fold open for easy access to all components.

  • Air Filter
    Oversized air filter provided inside of front cover features a screw-on clear filter bowl for easy filter cleaning.

Specifications:

  • Light-Duty Frame is rated up to 2200 lb (997.9 kg) and is designed for mounting on a 3″ x 3″ beam with 5/8-11 UNC hardware.

  • Standard-Duty Frame is rated up to 6900 lb (3130 kg) and is designed for mounting on a 3″ x 6″ beam with 3/4-10 UNC hardware.

  • Heavy-Duty Frames:
    · Frame H and HO type is rated up to 7000 lb (3175 kg) used for mounting on a 5″ x 7″ beam for 3/4-10 UNC hardware.
    · Frame HD and HDO type is rated up to 10,000 lb (4536 kg) with reinforced lifting bail and for mounting on a 5″ x 7″ beam with 1″-8 UNC hardware.
    · Frame X type is rated up to 10,000 lb (4536 kg) with reinforced lifting bail and for thru-beam mounting on a 6″ x 8″ beam for 1″-8 UNC hardware.

  • Remote Mount Frame (no lift bail). Includes 14″ x 8″ mounting pattern for 3/8-16 hardware.

  • Vac-Packs are available for other voltages. Contact ANVER for information and application requirements.

Vacuum Pump*:

  • Vacuum Pump is thermally overload protected and requires 115V/1PH/60Hz 15 amp service, oil-less dry piston pump has a 3/4 H.P. pump motor.

  • Operating Temperature: 35°F to 135°F (1.7°C to 57.2°C)

Options:

  • P/N: VLS-03AUX Auxiliary Alarm System
    Additional (2) sets of alarm light mounted on left and right side of vac-pack or mounted remotely on lifting structure and 107 dBA alarm horn. Contact ANVER for information and application requirements.

Specifications:

  • Model Number Rated
    Load
    Capacity
    Unit
    Weight
    A
    Max.
    Headroom
    B
    Handlebar
    Height
    C
    Handlebar
    Width
    D
    Handlebar
    Length
    E
    Hardware
    Centers
    F
    Hardware
    Spacing
    G
    Vacuum
    Pump
    Depth

    VPE3-L 2200 lb
    998 kg
    218 lb
    99 kg
    27 in.
    686 mm
    11 in.
    279 mm
    24 in.
    610 mm
    34 in.
    864 mm
    9 in.
    229 mm
    N/A 6.2 in.
    157 mm

    VPE3-S 6900 lb
    3130 kg
    222 lb
    101 kg
    29 in.
    737 mm
    13 in.
    330 mm
    24 in.
    610 mm
    34 in.
    864 mm
    22.38 in.
    568 mm
    N/A 6.2 in.
    157 mm

    VPE3-H 7000 lb
    3175 kg
    224 lb
    102 kg
    29 in.
    737 mm
    13 in.
    330 mm
    24 in.
    610 mm
    34 in.
    864 mm
    22.38 in.
    568 mm
    N/A 6.2 in.
    157 mm

    VPE3-HO 7000 lb
    3175 kg
    228 lb
    103 kg
    29 in.
    737 mm
    13 in.
    330 mm
    24 in.
    610 mm
    34 in.
    864 mm
    22.38 in.
    568 mm
    3.9 in.
    99 mm
    6.2 in.
    157 mm

    VPE3-HD 10000 lb
    4536 kg
    236 lb
    107 kg
    29 in.
    737 mm
    13 in.
    330 mm
    24 in.
    610 mm
    34 in.
    864 mm
    23.38 in.
    594 mm
    N/A 6.2 in.
    157 mm

    VPE3-HDO 10000 lb
    4536 kg
    246 lb
    112 kg
    29 in.
    737 mm
    13 in.
    330 mm
    24 in.
    610 mm
    34 in.
    864 mm
    23.38 in.
    594 mm
    4.1 in.
    104 mm
    6.2 in.
    157 mm

    VPE3-X 10000 lb
    4536 kg
    236 lb
    107 kg
    28 in.
    711 mm
    11 in.
    279 mm
    24 in.
    610 mm
    34 in.
    864 mm
    23.38 in.
    594 mm
    4.0 in.
    102 mm
    6.2 in.
    157 mm


  • Model Number Vacuum
    Pump
    Pump
    Capacity
    Vacuum
    Level
    At Sea
    Level
    Incoming Power
    Requirement AC
    Fits
    Tube
    Size

    VPE3-L 3/4 10 24″ Hg 115V/1PH/60Hz – 15 Amps 3 x 3 in.
    76 x 76 mm

    VPE3-S 3/4 10 24″ Hg 115V/1PH/60Hz – 15 Amps 3 x 6 in.
    76 x 152 mm

    VPE3-H 3/4 10 24″ Hg 115V/1PH/60Hz – 15 Amps 5 x 7 in.
    127 x 178 mm

    VPE3-HO 3/4 10 24″ Hg 115V/1PH/60Hz – 15 Amps 5 x 7 in.
    127 x 178 mm

    VPE3-HD 3/4 10 24″ Hg 115V/1PH/60Hz – 15 Amps 5 x 7 in.
    127 x 178 mm

    VPE3-HDO 3/4 10 24″ Hg 115V/1PH/60Hz – 15 Amps 5 x 7 in.
    127 x 178 mm

    VPE3-X 3/4 10 24″ Hg 115V/1PH/60Hz – 15 Amps 6 x 8 in.
    152 x 203 mm

 

Specifications:

Model Number Unit
Weight
A
Max.
Headroom
B
Vacuum
Pump
Depth
C
Vacuum
Pump
Width
Hardware
Mounting
Pattern
Vacuum
Pump
Pump
Capacity
Vacuum
Level
At Sea
Level
Incoming Power
Requirement AC
Fits
Tube
Size

VPE3-R 188 lb
85 kg
20 in.
508 mm
13 in.
330 mm
21 in.
533 mm
8 x 12 in.
203 x 305 mm
3/4 10 24″ Hg 115V/1PH/60Hz – 15 Amps Remote Applications


Vacuum Pad Attachments