Two Pad Vacuum Lifter Lifting Frames
Standard Two Pad Lifters – Capacity up to 6400 lb (2903 kg)

ANVER’S Standard Vacuum Lifters offer efficient material handling solutions by promoting functionality, safety, and ergonomic operations for a wide variety of applications and materials. Standard lifting frames are built to order from stock using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms, and vacuum cups selected.

Basic features on ANVER’s Standard Horizontal Vacuum Lifters include: vacuum leakage sensor and warning system; attach/release slide valve with safety lock; and locking hand knobs on the adjustable vacuum pad, slide assemblies, and crossarms (when applicable).

ANVER Vacuum Lifters comply fully with and meet the standards of US ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as complying with OSHA and most European requirements.

The L640M2-86 two-pad lifting frames are ideal for handling steel sheets with a capacity up to 6400 lb (2903 kg). The type of vacuum lifter – Mechanical, Air, or Electric – paired with the number of pads used will depend on your application needs. Foam pads are not available for mechanical vacuum generators.

Contact ANVER for more information, or fill out a Lifter Info/Quote Request Form and a Sales Engineer will respond to your request shortly.

Compatible Vacuum Generators
Mechanical Electric
 M600M_300h VPE3-GEN2_400X467
 M600M-Series VPE3-GEN2-Series
 
Request For Quote
Lifting Frame NumberL640M2-86
Rated Load Capacity [lbs (kg)]6400 (2903)
Unit Weight [lbs (kg)]395 (179)
A Lifting Frame Headroom [in. (mm)]10 (254)
B Beam Length [in. (mm)]86 (2184)
C Hardware Mounting Centers [in. (mm)]22.38 (568)
D Pad Dimensions [in. (mm)]19 x 35 (483 x 889)
E Pad Distances Maximum [in. (mm)]99 (2515)
E Pad Distances Minimum [in. (mm)]51 (1295)
Maximum Sheet Size [ft (M)]12 x 6 (3.7 x 1.8)
Seal NumberSR-1834-DP
Parking Stands (with M600M)72000222
Parking Stands (with VPE3-GEN2)72000038
Various plate sizes can be handled by adjusting the vacuum pad positions on the beam

Vacuum pads in fully extended position to handle maximum plate size.

Vacuum pads moved inwards to handle shorter plate.

 

Installation General Information Safety
Service Optional Equipment  
 
 
 

13600123 A