Rectangular Vacuum Cups and Vacuum Pads with ANDURASOFT® Foam Seals
Perfect for rough textured surfaces and Tread Plate or Diamond Plate

fp-100190

Shown above is the FP100190 (76200982)

ANVER Rectangle Foam Vacuum Pads feature a slip-in self-locking sealing ring. These ANDURASOFT® foam seals are most effective on rough, uneven or textured surfaces such as tread plate, diamond plate, textured surfaces, saw cut stone or smoothed concrete. Available in a number of shapes, styles and materials, their seal design makes maintenance easy.

Features

  • A wide variety of rectangle metal vacuum pads with ANDURASOFT® foam seals designed for industrial use. Replacement seals are always in stock and available for same day shipping to minimize downtime!
  • Seals are easily replaceable and economical. No special tools are needed as the seals can be replaced by hand in a few minutes while on the lifter.
  • Pads adjust easily to uneven or rough surfaces for maximum safety
  • Seals are available in a large variety of sizes
  • These Rectangular Vacuum Pads offer maximum versatility when used with ANVER Spring Loaded Suspension Assemblies
  • Dual position Clevis Mounting Slide
  • If buying pads separately from Anver please make sure to follow torque settings and bolt depths per specifications.
  • Contact ANVER for additional information.
  • ANDURASOFT® Foam rings are standard (K1 or K3 style). Other foam styles available as needed. Consult Factory.

 

Foam Vacuum Pad Specifications with ANDURASOFT® Foam Seals

 

FP012128-K7-01
RFQ Product Photo Vacuum
Pad Number
Horizontal
Load
Capacity

(2:1
Safety Factor)

lbs
(kg)
Vertical
Load
Capacity

(4:1
Safety Factor)

lbs
(kg)
RFQ Standard
Replacement
Seal Number

(Not Included)
Approx.
Weight

lbs
(kg)
A
Length

in.
(mm)
B
Width

in.
(mm)
C
Height

in.
(mm)
D
Mounting
in.
(mm)
E
Vacuum
Port
D1 D2 D3
FP012128_300x107 FP012128 30
(13)
15
(6)
FR012128-K7
Standard
0.5
(0.3)
13
(330)
1.38
(35)
0.72
(18)
8.0
(203)
[M6X1.0]
4.0
(102)
[M6X1.0]
2.0
(51)
[M6X1.0]
1/8 G

NOTE:  Some pads include two vacuum ports.  A plug will be provided.

 

Foam_Rect_WEB
RFQ Product Photo Vacuum
Pad Number
Horizontal
Load
Capacity

(2:1
Safety Factor)

lbs
(kg)
Vertical
Load
Capacity

(4:1
Safety Factor)

lbs
(kg)
RFQ Standard
Replacement
Seal Number

(Not Included)
Approx.
Weight

lbs
(kg)
Dimensions C
Height

in.
(mm)
D
Mounting
in.
(mm)
E
Vacuum

Port
A
Length

in.
(mm)
B
Width
in.
(mm)

FP040110 FP040110
(76201058)
100
(45)
50
(23)

FR040110-K3
Standard

(24531335)
2.4
(1)
11
(279)
4
(102)
1.28
(33)
6.5
(165)
3/8″
NPT

FP040160 FP040160
(76201059)
170
(77)
85
(39)

FR040160-K3
Standard

(24531336)
3.5
(1.5)
16
(406)
4
(102)
1.28
(33)
6.5
(165)
3/8″
NPT

FP050120 FP050120
(76201060)
170
(77)
85
(39)

FR050120-K3
Standard

(24531337)
3.5
(1.5)
12
(305)
5
(127)
1.28
(33)
6.5
(165)
3/8″
NPT

FP050160 FP050160
(76201068)
225
(102)
112
(51)

FR050160-K3
Standard

(24531347)
4.6
(2)
16
(406)
5
(127)
1.28
(33)
6.5
(165)
3/8″
NPT

FP060180 FP060180
(76201061)
350
(159)
175
(79)

FR060180-K3
Standard

(24531338)
6.5
(3)
18
(457)
6
(152)
1.28
(33)
6.5
(165)
3/8″
NPT

NOTE:  Some pads include two vacuum ports.  A plug will be provided.

 

FP070200-WEB-01  figure-b figure-c

Figure A                                                               Figure B                                                                Figure C

RFQ Product Photo Vacuum
Pad Number
Horizontal
Load
Capacity

(2:1
Safety Factor
)
lbs
(kg)
Vertical
Load
Capacity

(4:1
Safety Factor
)
lbs
(kg)
RFQ A
Standard
Replacement
Seal Number

(Not Included)
Approx.
Weight

lbs
(kg)
Drawing
Diagram

(above)
Dimensions C
Height

in.
(mm)
D
Mounting
E
Vacuum

Port
B1
Width

in.
(mm)
B2
Width

in.
(mm)

FP070200 FP070200
(76200980)
500
(227)
250
(113)
FR070200-K1
Standard
(24531066)
10.77
(4.89)
Figure
A
7.13
(181)
20.13
(511)
1.75
(44)
[K1 Seal]

6.00 x 2.50
(152 x 64)
[(4) M10X1.5]

OR

6.5
(165)
For Swivel/Rigid
Suspensions

3/8″
NPT

FR070200-K2C2
(24531083)

FR070200-K2J7
(24531374)
FP100140
(76200981)
500
(227)
250
(113)
FR100140-K1
Standard
(24531067)
10.82
(4.91)
Figure
B
10.13
(257)
14.13
(359)
1.75
(44)
[K1 Seal]
8.00
(203)
Bolt Circle
3/8″
NPT

FR100140-K2C2
(24531084)

FR100140-K2J7
(24531375)
FP100190
(76200982)
750
(340)
375
(170)
FR100190-K1
Standard
(24531068)
14.98
(6.79)
Figure
C
10.13
(257)
19.13
(486
1.75
(44)
[K1 Seal]
6.50 sq.
(165)
[(8) M10X1.5]
3/8″
NPT

FR100190-K2C2
(24531085)

FR100190-K2J7
(24531376)

NOTE:  Some pads include two vacuum ports.  A plug will be provided.

Figure D

RFQ Product Photo   Vacuum
Pad Number
Horizontal
Load Capacity

(2:1
Safety Factor
)
lbs
(kg)
Vertical
Load
Capacity

(4:1
Safety Factor
)
lbs
(kg)
RFQ A
Standard
Replacement
Seal Number

(Not Included)
Approx. Weight
lbs
(kg)
Drawing Diagram
(above)
Dimensions C
Height

in.
(mm)
D
Mounting
E
Vacuum

Port
B1
Width

in.
(mm)
B2
Width

in.
(mm)

FP100250
(76200983)
1000
(454)
500
(227)
FR100250-K1
Standard
(24531069)
19.87
(9.01)
Figure
D
10.13
(257)
25.13
(638)
1.75
(44)
[K1 Seal]
6.50 x 13.00
(165 x 330)
[(6) M10X1.5]
3/8″
NPT

FR100250-K2C2
(24531086)

FR100250-K2J7
(24531377)
FP120210
(76200986)
1000
(454)
500
(227)
FR120210-K1
Standard
(24531070)
21.21
(9.62)
Figure
D
12.13
(308)
21.13
(537)
1.75
(44)
[K1 Seal]
6.50 x 13.00
(165 x 330)
[(6) M10X1.5]
3/8″
NPT

FR120210-K2C2
(24531087)

FR120210-K2J7
(24531378)
FP120290-VGP
(76200987)
1500
(680)
750
(340)
FR120290-K1
Standard
(24531071)
28.10
(12.75)
Figure
E
12.13
(308)
29.13
(740)
2.00
(51)
[K1 Seal]
6.50 x 19.50
(165 x 495)
[(8) M10X1.5]
1/2″
NPT

FR120290-K2C2
(24531088)

FR120290-K2J7
(24531379)
FP140320-VGP
(76200990)
2000
(908)
1000
(454)
FR140320-K1
Standard
(24531073)
36.26
(16.44)
Figure
E
14.13
(359)
32.13
(816)
2.00
(51)
[K1 Seal]
6.50 x 19.50
(165 x 495)
[(8) M10X1.5]
1/2″
NPT

FR140320-K2C2
(24531090)

FR140320-K2J7
(24531380)

Note: Consult factory for alternate configurations.

 *The cup capacities shown above are based on 22″ Hg at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright). Rated Load Capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum.
**Replaceable Foam Seal. For information and application recommendations please visit web page.

 

Standard Rectangle Foam Pad Attachments
ANDURASOFT® Foam Seal Vacuum Pad Attachments for Electric and Air-Powered Vacuum Generators


Foam Seal Vacuum Pad Attachments
ANVER’s ANDURASOFT® foam seal vacuum pad attachments are designed for handling rough, moderately uneven load surfaces such as saw cut or flamed stone, rough wood, fiberglass web and concrete. They can also handle smooth stone surfaces if used for both smooth and rough stone.

The ANDURASOFT® foam seals themselves fit into a double machined lip so they will stay on firmly even in the vertical position. Changing seals can be done in under a minute by hand without tools making this system perfect for critical job site installation schedules. The economical replaceable ANDURASOFT® foam seals readily conform to rough, uneven surfaces to create as vacuum tight a seal as possible.

The pad attachments are rated at a conservative 22″ Hg vacuum unlike the 24″ Hg used on traditional cups. They are then either divided by two for horizontal or four for vertical handling. Made in USA by ANVER.

Features

  • A range of Standard Interchangeable Pad Attachments with ANDURASOFT® Foam Seals which can be quickly changed as needed with a two nut-and-bolt mounting.
  • Machined lip to insure the seal stays in position. Long lasting foam seals handle both smooth and rough stone.
  • Replacing worn seals can be done in under a minute by hand without tools.
  • Replacement seals are in stock for immediate shipping.

NOTE:  Any pad attachments used with EZ-Tilt-(Series) attachments MUST USE Vertical Capacity listed.

Single Foam Pad Attachments with ANDURASOFT® Foam Seals

figure-F            figure-G
Figure F                                                                                                     Figure G
TraceParts Product
Photo
(Click to Enlarge)
Vacuum
Pad Number*
Rated
Load
Capacity*
(Horizontal)
lb
(kg)
Rated
Load
Capacity*
(Vertical)
lb
(kg)
A
Standard
Replacement
Seal Number
(Not Included)
Approx.
Weight
lbs
(kg)
Drawing
Diagram
(above)
Dimensions C
Height

in.
(mm)
D
Mounting

Centers
in.
(mm)
F
Quick

Disconnect/
Port Size
NPT
B1
Width

in.
(mm)
B2
Length
in.
(mm)

  fpa040110g33thumb FPA040110G33
(76400670)
100
(45)
50
(23)

FR040110-K3
Standard

(24531335)
6.2
(2.8)
Figure F 4
(102)
11
(279)
2.64
(67)
9
(229)
3/8″

  fpa040160g33thumb FPA040160G33
(76400671)
170
(77)
85
(39)

FR040160-K3
Standard

(24531336)
7.3
(3.3)
Figure F 4
(102)
16
(406)
2.64
(67)
9
(229)
3/8″

  fpa050120g33thumb FPA050120G33
(76400672)
170
(77)
85
(39)

FR050120-K3
Standard

(24531337)
7.3
(3.3)
Figure F 5
(127)
12
(305)
2.64
(67)
9
(229)
3/8″

  fpa050160g33thumb FPA050160G33
(76400673)
225
(102)
112
(51)

FR050160-K3
Standard

(24531347)
8.4
(3.8)
Figure F 5
(127)
16
(406)
2.64
(67)
9
(229)
3/8″

  fpa060180g33thumb FPA060180G33
(76400674)
350
(159)
175
(79)

FR060180-K3
Standard

(24531338)
10.3
(4.7)
Figure F 6
(152)
18
(457)
2.64
(67)
9
(229)
3/8″
3D Photo
to Come

FPA070200G33
(76400564)

Shown with optional
Foam Sealing Ring K1

500
(227)
250
(113)
FR070200-K1
Standard
(24531066)
14.6
(6.6)
Figure F 7.13
(181)
20.13
(511)
3.69
(94)
9.00
(228)
3/8″

FR070200-K2C2
(24531083)

FR070200-K2J7
(24531374)
3D ANVER Custom FPA Foam Seal Vacuum Pad No.: FPA100140G33-K1

FPA100140G33
(76400563)

Shown with optional
Foam Sealing Ring K1

500
(227)
250
(113)
FR100140-K1
Standard
(24531067)
18.05
(8.19)
Figure G 10.13
(257)
14.13
(359)
3.56
(90)
9.00
(228)
3/8″

FR100140-K2C2
(24531084)

FR100140-K2J7
(24531375)
  ANVER Custom FPA Foam Seal Vacuum Pad No.: FPA100190G33-K1

FPA100190G33
(76400566)

Shown with optional
Foam Sealing Ring K1

750
(340)
375
(170)
FR100190-K1
Standard
(24531068)
22.91
(10.39)
Figure G 10.13
(257)
19.13
(486)
3.56
(90)
9.00
(228)
3/8″

FR100190-K2C2
(24531085)

FR100190-K2J7
(24531376)
3D ANVER Custom FPA Foam Seal Vacuum Pad No.: FPA100250G33-K1

FPA100250G33
(76400565)

Shown with optional
Foam Sealing Ring K1

1000
(454)
500
(227)
FR100250-K1
Standard
(24531069)
32.99
(14.97)
Figure G 10.13
(257)
25.13
(638)
3.56
(90)
9.00
(228)
3/8″

FR100250-K2C2
(24531086)

FR100250-K2J7
(24531377)
3D ANVER Custom FPA Foam Seal Vacuum Pad No.: FPA120210G33-K1

FPA120210G33
(76400570)

Shown with optional
Foam Sealing Ring K1

1000
(454)
500
(227)
FR120210-K1
Standard
(24531070)
33.33
(15.11)
Figure G 12.13
(308 )
21.13
(537)
3.56
(90)
9.00
(228)
3/8″

FR120210-K2C2
(24531087)

FR120210-K2J7
(24531378)
3D ANVER Custom FPA Foam Seal Vacuum Pad No.: FPA120290G33-K1

FPA120290G33
(76400572)

Shown with optional
Foam Sealing Ring K1

1500
(680)
750
(340)
FR120290-K1
Standard
(24531071)
45.87
(20.81)
Figure G 12.13
(308)
29.13
(740)
3.56
(90))
9.00
(228)
1/2″

FR120290-K2C2
(24531088)

FR120290-K2J7
(24531379)
3D ANVER Custom FPA Foam Seal Vacuum Pad No.: FPA140320G33-K1

FPA140320G33
(76400583)

Shown with optional
Foam Sealing Ring K1

2000
(907)
1000
(454)
FR140320-K1
Standard
(24531073)
54.03
(24.51)
Figure G 14.13
(359)
32.13
(816)
3.56
(90)
9.00
(228)
1/2″

FR140320-K2C2
(24531090)

FR140320-K2J7
(24531380)

Note: Consult factory for alternate configurations.

 *The cup capacities shown above are based on 22″ Hg at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright). Rated Load Capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum.
**Replaceable Foam Seal. For information and application recommendations please visit web page.

 

back-foam-pad-select

Standard Round Foam Pads Standard Foam Pad Tilters Parking Stands


Standard Foam Pads


Standard Powered Tilters
with Foam Pads
ANVER Vacuum Lifter Parking Stands
Parking Stands are
Recommended for
Lifters with Foam Pads