Compressed Air Powered Vacuum Generators
Low Headroom Air Powered Vacuum Generators
VPFL4 AIR Series

VPFL4-AIR_450x196

ANVER’s Latest models of vacuum generators feature high capacity pumps, valves, filters and gauges for trouble-free operation in most demanding production environments. These light weight entry level units are designed for use with a wide assortment of vacuum lifters assemblies and pad attachments. The VPFL4-AIR Series features a sturdy welded frame construction and ruggedly built, yet affordably priced for unmatched value.

Features:

  • Air Powered Vacuum Generators
    No electric power required, operates using dry clean compressed air for vacuum generation. The vacuum generator incorporates a single stage venture with no moving parts or rubber gaskets to maintain or replace.
  • Front Mounted Vacuum Gauge
    Manifold vacuum gauge is front mounted on manifold block for continuous monitoring by the operator.
  • Ergonomic Adjustable Front Handlebar
    Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller size loads.
  • Slide Control Valve with Push-Button Safety Lock
    The slide control valve assembly controls the vacuum attach and release and is mounted to the front handlebar for convenient access by the operator. The push-button safety lock
    is to keep the slide valve in the attach position while lifting a load to prevent accidental load release.
  • Vacuum Check Valve and Reservoir
    A check valve and a vacuum reservoir helps to maintain vacuum if the supply of compressed air is interrupted, for safe handling of nonporous loads.
  • Takes Standard Dry, Clean Shop Air
    Input pressure to be regulated to 72.5 psi. Provided with 1/4” NPT
  • Vacuum Loss Sensor and Warning System
    [P/N: VLS-08 & P/N: VLS-08-20] See document
  • Air Filter
    High capacity air filter provides protection against venture damage. A clear filter bowl to monitor filter for inspection and cleaning.

General:

  • Frame Construction
    Both VPFL4-AIR Series frames are fully welded with a structural lifting capacity rating of 2200 lb. (998 Kg.) for 3” sq. beams with beam mounting hardware.
  • Versatility
    For larger load lifting capacity or alternate power requirements, ANVER offers electric powered, air powered and self powered mechanical vacuum generators, all with standard mounting designs
    for interchangeability.

Specifications:

Request For Quote
Generator ModelVPFL4-20-AIRVPFL4-20-AIR-TVPFL4-20-AIR-CVPFL4-30-AIRVPFL4-30-AIR-TVPFL4-30-AIR-C
Rated Load Capacity [lbs (kg.)]2200 (998)2200 (998)2200 (998)2200 (998)2200 (998)2200 (998)
Unit Weight [lbs (kg.)]25 (11)36 (16)36 (16)25 (11)36 (16)36 (16)
A Maximum Headroom [in. (mm)]8 (203)14 (356)14 (356)8 (203)14 (356)14 (356)
B Handlebar Height [in. (mm)]4.63 (118)4.63 (118)4.63 (118)4.63 (118)4.63 (118)4.63 (118)
C Handlebar Width [in. (mm)]16 (406)16 (406)16 (406)16 (406)16 (406)16 (406)
D Handlebar Length [in. (mm)]34 (864)34 (864)34 (864)34 (864)34 (864)34 (864)
E Hardware Centers [in. (mm)]9 (229)9 (229)9 (229)9 (229)9 (229)9 (229)
F Counterweight Length [in. (mm)]14.2 (361)14.2 (361)N/A14.2 (361)14.2 (361)N/A
Fits Square Tube Size [in. (mm)]3x3 (76x76)3x3 (76x76)3x3 (76x76)3x3 (76x76)3x3 (76x76)3x3 (76x76)
Vacuum Flow [SCFM]4.54.54.59.59.59.5
Air Consumption [SCFM]6.16.16.1141414
Applicationsmooth,
non-porous
smooth,
non-porous
smooth,
non-porous
Rough,
semi-porous
Rough,
semi-porous
Rough,
semi-porous

Optimum pressure is 72.5 psi. Air supply flow (CFM) may adversely affect required pressure (psi) to achieve optimum vacuum level. Vacuum level is 24″ Hg at sea level.

 

More Information

Lightweight Generators
with Pad Attachments


Compact VPFL4 Generator Available
Contact Factory for More Info

Selecting the
Right Vacuum Lifter

Vacuum Pad
Attachments