Vacuum Tube Lifting System Quick Release with Spring Lock
Quick Release for Fast Changing of Pad Attachments from the Lifting Head

ANVER Vacuum Tube Lifter Quick Release with Spring Lock makes changing lifting heads fast and easy.  Allowing the operator to quickly change vacuum tube lifter pad attachments for varying load handling requirements. Their use minimizes downtime, maximizing productivity. ANVER’s design allows you to rotate the pad and lock it in position with 90 degree stops.  Made of aluminum.


(VT-QRT-S-4P and VT-QRB-S-4P shown. See in chart below)

Quick Disconnect Ordering Information:

Quick Release for VT Model Vacuum Tube Lifters
Product
Photo
Part
Number
Description Attaches To Added
Height
For Use with ANVER
Vacuum Tube Lifter VT Models
For Use with Mini Series Vacuum Tube Systems
VT-QRT-M-4P Mini Quick Release Top – With Spring Lock Top Tube Lift Head See
Below
VT-QRB-M-4P Mini Quick Release Bottom – With Spring Lock Bottom Pad Attachment 1.6
(41)
VT-QRB-M-T1-4P Mini Quick Release Bottom –
For small single pads with T1 mounting
Bottom Pad Attachment 1.97
(50)
For Use with Standard Series Vacuum Tube Systems
VT-QRT-S-4P Standard Quick Release Top – With Spring Lock Top Tube Lift Head See
Below
VT-QRB-S-4P Standard Quick Release Bottom – With Spring Lock Bottom Pad Attachment 2.02
(51)
VT-QRB-S-T1-4P Standard Quick Release Bottom –
For small single pads with T1 mounting
Bottom Pad Attachment 2.52
(64)

13600085 A

Vacuum Tube Lifting System Quick Release
Quick Release for Fast Changing of Pad Attachments from the Lifting Head

ANVER Vacuum Tube Lifter Quick Release, made of 304 stainless steel, allow the operator to quickly change vacuum tube lifter pad attachments for varying load handling requirements. Their use minimizes downtime, maximizing productivity. ANVER’s design allows you to fully rotate the pad and lock it in any position. Remember, the complete quick release assembly adds 2.65″ (67 mm) to the system’s overall headroom requirements.

Quick Disconnect Ordering Information:

Quick Release for VT Model Vacuum Tube Lifters
Product
Photo
Part
Number
Description Attaches To Added
Height
For Use with ANVER
Vacuum Tube Lifter VT Models
For Use with Mini Series Vacuum Tube Systems
VT-QRT-M Mini Quick Release Top – Stainless Steel Top Tube Lift Head 2.65
(67)
VT-QRB-M Mini Quick Release Bottom – Stainless Steel Bottom Pad Attachment
For Use with Standard Series Vacuum Tube Systems
VT-QRT-S Standard Quick Release Top – Stainless Steel Top Tube Lift Head 2.65
(67)
VT-QRB-S Standard Quick Release Bottom – Stainless Steel Bottom Pad Attachment

13600086 A

 

Vacuum Tube Lifting System – Bottom Swivel Assemblies and Universal Swivels:

ANVER VT-SW-M Bottom Swivel Assembly for Vaccum Tube Lifters

Bottom Swivel Assembly Features:

  • The 360° bottom swivel assembly, made of 304 stainless steel, allows full rotation of the load under the vacuum tube lifter control head. This allows the attached load to be precisely spun into position while keeping the control head in front of the operator.
  • Allows for easier and more precise positioning of loads. Commonly used when unloading pallet loads of boxes to a skid with different orientations.
  • Designed to offer easy rotation with just enough drag so that the load does not just keep spinning.

Bottom Swivel Assembly Dimensional Specifications:

Bottom Swivel Assembly for Vacuum Tube Lifters

Product Photo
(Click to Enlarge)

Part
No.

A
in.

(mm)
B
in.

(mm)

For Use with
VT Systems:

  For Use with Mini Series Vacuum Tube Systems
ANVER VT-SW-M Bottom Swivel Assembly for Vaccum Tube Lifters

VT-SW-M

3.15
(80)
1.8
(45)
  For Use with Standard Series Vacuum Tube Systems
ANVER VT-SW-S Bottom Swivel Assembly for Vaccum Tube Lifters

VT-SW-S

4.72
(120)
1.3
(33)

 

Vacuum Tube Lifting System Tilt Adaptors
90° Tilter Adapters

ANVER 90 Degree Tilt Adapter for Vacuum Tube Lifting Systems

90° Tilter Adapter – Below the Head Type
ANVER Vacuum Tube Lifters can be equipped with a variety of adapters to make your lifting jobs as simple as possible. These 90° Tilter Adapters allow the operator to transfer loads easily between the horizontal and vertical position. This sturdy stainless steel assembly connects the bottom of the lifting head to the top of the pad attachment for greater control of the load.

Features: 

  • Indexing Plunger holds the pad in place for vertical attachment.
  • Flexible Vacuum Hose and two sealing gaskets provide airtight connection.

  • Rugged Stainless Steel construction.

  • Industry-standard hole pattern mounts to almost any pad or lift head.

Part Number Description
  For Use with Mini Series Vacuum Tube Systems
VT-TILT-M

90° Gravity Tilter for Mini Series Vacuum Tube Lifters

  For Use with Standard Series Vacuum Tube Systems
VT-TILT-S

90° Gravity Tilter for Standard Series Vacuum Tube Lifters

VT-TILT-S-H

90° Gravity Tilter for Standard Series Vacuum Tube Lifters with Handle


Universal Swivels for Vacuum Tube Lifters – Stainless Steel

Universal swivel assembly for vacuum tube lifters

Universal Swivel Features:

  • ANVER’s Stainless Steel Universal Swivels are used to save wear and tear to the vacuum lifting tubes while handling somewhat unbalanced loads.
  • The universal swivel ensures that the load’s weight hangs directly under the center of the vacuum lift tube, extending the lift tube life.
  • Quality construction using heavy gauge stainless steel with all wear points using nylon bearing sleeves.  The swivel comes with four mounting holes of which two will fit most other vacuum tube lifters on the market.

Universal Swivel Dimensional Specifications:

Universal Swivel Assembly for Vacuum Tube Lifters

Swivel
Part No.

A
in.

(mm)

B
in.

(mm)

For Use with VT
Systems:

  For Use with Mini Series Vacuum Tube Systems

VT-UAS-M

3.15
(80)

4.75
(121)

  For Use with Standard Series Vacuum Tube Systems

VT-UAS-S

4.72
(120)

5.75
(146)


Quick Release Extensions:

ANVER Quick Release extensions are useful for applications where the load must be picked up from a location where it is difficult to maneuver the lift tube. By creating a longer distance from the Lift Head to the Pad Attachment, these extensions make sure that the tube lifter is comfortable and easy to operate. With an ANVER quick release system, the extensions can be attached or removed in seconds, making it easy to adapt to differing load sizes and shapes.

Features:

  • Heavy Duty Welded Steel Construction
  • A Variety of Sizes Available to fit Any Application
  • Attaches quickly and easily to ANVER quick release adapters.
  • Nickel Plating Also Available – Please Consult Factory

Quick Release Extensions for Vacuum Tube Lifters

Part Number Description
Quick Release Extensions

Custom

Extensions
VT-QRE-06 Quick Release Extension, 6″ (15.2 cm)
VT-QRE-10 Quick Release Extension, 10″ (25.4 cm)
VT-QRE-14 Quick Release Extension, 14″ (35.6 cm)
VT-QRE-18 Quick Release Extension, 18″ (45.7 cm)
VT-QRE-22 Quick Release Extension, 22″ (55.9 cm)