Category Archives: Uncategorized

IP2050G18-PU

IP2050G18-PU

Picker
Part No.

Resting
insertion
D
Dia.

in.
(mm)

Maximum
Inflatable
D1
Dia.

in.
(mm)

Overall
d
Dia.

in.
(mm)

d1
Connection
Thread
Size

Overall
H
Height
in.
(mm)

Rubber
Gripper
h
height
in.
(mm)

IP2050G18-PU

0.79
(20)
1.10
(28)
0.73
(18.5)
G 1/8″ 3.98
(101)
1.97
(50)

VPE1-GEN2 Press Release

Vacuum Lifters
VPE1-GEN2 Series Vac-Pack to Handle Non-Porous to Semi-Porous Loads

VPE1-GEN2_WEB 

Furthering its commitment to offer safe and efficient vacuum lifting solutions, ANVER Corporation introduces the new VPE1-GEN2 Series Vacuum Lifter Generator. Designed especially to handle non-porous to semi-porous loads, these rugged generators can withstand heavy production use and they are compatible with an extensive selection of ANVER vacuum pad attachments and lifter assemblies.

The newly designed VPE1-GEN2 Series Vac-Pack is full of safety features, giving operators peace of mind when lifting loads. To remove the risk of accidental release by an operator, the Vac-Pack has a load sensitive lifting bail with safety lock-out that insures the pendant controls are active only when the lifter and load are lowered completely (available on most horizontal models), and a separate attach and release safety lock-out mechanism on the control pendant itself.

A solid-state Vacuum Control Module houses all the required vacuum generator controls in one sturdy unit, including safety lights and the VLS-03E audible vacuum leakage warning system. The VLS-03E sounds an alarm if a slow vacuum leak is present and the vacuum level drops to a pre-determined set point. In the event of a power failure, the VPE1-GEN2 Series has an internal check valve to stop vacuum loss, in addition to a large vacuum reservoir to assist in maintaining a safe vacuum level for non-porous loads.

Other standard features include an ergonomic control handlebar that is easy to grasp and allows operators to easily and safely maneuver an attached load without touching the load itself. The large loop handlebar can be adjusted for smaller size loads. All gauges, indicator lights, and power switches are mounted on the front of the control panel for easy visibility and accessibility. The control pendant clip mounts to the front handle on a 10 ft. coiled cord and provides rapid attach and release functions at the operator’s fingertips. Units are available with heavy duty frames for mounting remotely.

The VPE1-GEN2 Series has a rated load capacity up to 4,600 lbs (2,087kg) depending on the model and pad attachment. Optional generator configurations and set-ups are available. Contact ANVER for further information and application requirements.

Click Here for more Product Information

 

Lifter RFQ 3



Please fill out the form below to the best of your ability. If you do not know the information for a section, or you feel it is not relevant please leave it blank. Not all fields on this form are relevant to every application.

 

Is this a request for a: Quote or is it for Informational purposes?

If this is a Quote Request, what date do you require a Quote By:

Based on your information below, would you like to receive an ANVER Literature Packet: Yes


Lifter Number:
 


Contact Information:

Name*:
Company*:
(If no company affiliation, enter “NONE”):

Address 1:

Address 2:

City:

State: Zip:

Country:

Phone:

Fax:

E-Mail*:

* Denotes Required Field


Material Specifications:
Material to be lifted* –
*You may enter a more detailed description of the material in the notes section below.
Dimensions: Max. Length: Min. Length:
  Max. Width: Min. Width:
**Thickness:
Height for boxes.
Max: Min:
Weight: Max: Min:
Material Temp.: Max. Min:

** Dimensional specifications are critically important in determining the correct lifter for your specific application.


Load Orientation:
(check all that apply)

1
  Horizontal Lift

2
  Vertical Lift

3

 

Vertical Lift and Rotation

4

 

90° Tilting
usually fully powered

5

 

90° Gravity Tilt
pivots on edge,
used in the Stone industry

6

 

180° Tilting
rare, 90° tilt is usually adequate

7

 

Side-Grip
can replace flippers, many styles

8

 

Side-Grip and Rotate
can replace flippers, many styles

9

 

360° Tilt (Flipper)
rare, usually fully powered

 

10

 

90° Tilting with Rotation
for versatile manipulation

 


Required Power Source:
(check any you are interested in)

Mechanical (for ‘Horizontal Lift’ applications only)
Electric
Air Battery Don’t Know


Required Voltage:

Crane/Hoist:
Do you require one or more of the following: Crane Hoist

Tube Lift Systems:
 

Trolley Saddle Height:

Stack Height – Max:

Min:



Additional Info:

Once you have completed as much of this form as possible please click on the submit button below. Your form will be submitted to one of our capable application engineers for processing and you will be contacted shortly.


ANVER Corporation
36 Parmenter Road
Hudson, MA 01749 USA

Toll Free:
Tel:
Fax:
Home Page:
E-mail:

800-654-3500 – US & Canada only
+1-978-568-0221
+1-978-568-1570
www.anver.com
Email ANVER