Vacuum Lifters, Vacuum TiltersVacuum Lifters
Tilt 90° with Fingertip Control

ANVER Vacuum Lifters Tilt 90° with Fingertip Control and No Load Damage

A full line of powered vacuum lifters and tilters for handling large flat panels and awkward loads comprised of porous and nonporous materials, without the slings, clamps, or hooks that can cause damage, has been introduced by ANVER Corporation of Hudson, Massachusetts.

ANVER ET Series Powered Vacuum Lifters and Tilters are capable of lifting from the horizontal to the vertical plane and back, without contact while turning, and will stay in place if stopped during transfer. They feature a lightweight, narrow, easy- to- maneuver frame, totally adjustable vacuum cup placement, and a handlebar with fingertip control for tilting loads up to 90° under power. Providing a 100% continuous duty cycle with instant attach and release, they operate in conjunction with a hoist, and are designed to allow one-person manipulation of large flat panels up to 6 ft x 12 ft (1.8 m x 3.7 m), and awkward loads with contoured surfaces.

Ideal for handling glass, steel, stone, wood, fiberglass, plastic and dry wall loads,  ANVER ET Series Powered Vacuum Lifters and Tilters are available in 500-, 1000-, and 2000 lb (227-, 454-, and 907 kg) capacity models. Powered by either electricity or compressed air, they provide a 100% duty cycle, instant attach and release, and operate in conjunction with a hoist. These Lifters can be fitted with 2, 4, or 8 vacuum cups, and incorporate an oversize vacuum pump, filter, and electric actuator for each rated capacity. Main beams range from 48″ to 110″ (1.2 m x 2.8 m) long, depending upon model, and the crossarms are typically 44″ (1.1 m) wide. Requiring only 115 volt single phase electric power to operate, they can be equipped with a wide selection of vacuum cup styles to match specific user requirements.

 Click Here for more Product Information


Slider