Vacuum Cups and Suction Cups
Vacuum Cup Fittings – Group 1
Barbed Fittings which Push-In from the Top for ANVER Universal Group 1 Suction Cups
ANVER divides small universal vacuum suction cups into three groups based on mounting specifications and style. Group 1 Fittings, shown here, are simple barbed fittings that push in from the top of the cup.
Within each vacuum fitting group, the hardware is interchangeable with all other suction cups within the group. Any Group 1 fitting will fit any Group 1 suction cup. It may also fit other suction cups with similarly sized holes in the cups’ centers. Contact ANVER to verify suitability.
These all-metal, electro-less nickel-plated brass fittings are reusable. Once you buy the cups with fittings, you only need to buy replacement rubber cups in the future.
The suction cup is simply pressed onto the end of the barbed fitting to hold tight. Replacement takes only a few seconds and the fitting does not need to be unscrewed.
These specific cup fittings are top-quality production grade fittings made by ANVER Corp. in the USA.
Group 1 Vacuum Cup Fittings:
(Click to Enlarge)
The BM5 5 mm barbed fitting w/ Captured O-Ring screws onto the SLSA-1 suspensions
The BM10-32 barbed fitting w/ Captured O-Ring can screw into 10-32 UNF or 5 mm female
The BM6 6mm barbed fitting w/ Captured O-Ring can screw into any 6 mm female fitting or mounting
|–||Product Photo||Part No.||Connection||Thru Hole||Hex Size||Added Height||Overall Height||Weight|
The B18F-G Barbed fitting is a G1/8″ female thread and allows you to screw into the SLSA-2 Suspensions
The B18F Barbed fitting is a 1/8″ female NPT thread
The B18M Barbed fitting is a 1/8″ male NPT with a 10–32 UNF inside thread
The B18M-G Barbed fitting is a G1/8″ male with a 5 mm female inside thread
| ||The “G” thread is also known as BSPP, commonly used world-wide for vacuum applications.|
Note: 5 mm and 10-32 Male screws directly into 5 mm Female fittings.
Other Adapter Fittings for Other Connections:
| Group 2 Vacuum|
| Group 3 Vacuum|
| || || || || |
Vacuum Cups that use Push-In Style Group 1 Vacuum Cup Fittings:
|Flat Suction Cups||Single Bellows Suction Cups||Double Bellows Suction Cups|
F5-, F10-, F15-, F20-, F25-
B1.5-5-, B1.5-11-, B1.5-14–, B1.5-16-, B1.5-20-, B1.5-20-, B1.5-22-, B1.5-25-
B2.5-5-, B2.5-7-, B2.5-9-, B2.5-14-, B2.5-18-, B2.5-20-, B2.5-25-