Vacuum Powered Lifters
Standard Three Pad Lifters – Capacity up to 6900 lb (3130 kg)

previous arrow
next arrow
Slider

ANVER’S Standard Vacuum Lifters offer efficient material handling solutions by promoting functionality, safety, and ergonomic operations for a wide variety of applications and materials. Standard lifting frames are built to order from stock using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms, and vacuum cups selected.

Basic features on ANVER’s Standard Horizontal Vacuum Lifters include: vacuum leakage sensor and warning system; attach/release slide valve with safety lock; and locking hand knobs on the adjustable vacuum pad, slide assemblies, and crossarms (when applicable).

ANVER Vacuum Lifters comply fully with and meet the standards of US ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as complying with OSHA and most European requirements.

The L690M3-110 three-pad lifting frames are ideal for handling carbon steel and stainless steel sheets and plates with a capacity up to 6900 lb (3130 kg). The type of vacuum lifter – Mechanical, Air, or Electric – paired with the number of pads used will depend on your application needs. Foam pads are not available for mechanical vacuum generators.

Contact ANVER for more information, or fill out a Lifter Info/Quote Request Form and a Sales Engineer will respond to your request shortly.

*Lifting frame shown with vacuum generator and/or optional accessories, not included. Unit weight does not include optional equipment.

Standard Lifting Frames with Rubber Vacuum Seals Specifications

Compatible Vacuum Generators
MechanicalElectric
 M600M_300hVPE3-GEN2_400X467
 M600M-SeriesVPE3-GEN2-Series
Request For Quote
Lifting Frame NumberL690M3-110
Rated Load Capacity [lbs (kg)]6900 (3130)
Unit Weight [lbs (kg)]500 (227)
A Pad Size [in. (mm)]24 (610)
B Lifting Frame Headroom [in. (mm)]10.95 (278)
C Beam Length [in. (mm)]110 (2794)
D Pad Distances Maximum [in. (mm)]125.78 (3270)
D Pad Distances Minimum [in. (mm)]56 (1422)
E Hardware Mounting Centers [in. (mm)]22.38 (568)
Maximum Sheet Size [ft (M)]12 x 6 (3.6 x 1.8)
Seal NumberSR-235M
Parking Stands (with VPE3-GEN2)72000038
Parking Stands (with M600M-S)72000222
 

Various plate sizes can be handled by adjusting the vacuum pad positions on the beam

Vacuum pads in maximum position to handle maximum plate size.

Vacuum pads moved inwards to handle minimum plate size.

Center vacuum pad (1/3 capacity) used for short, narrow plates. Outer pads provided with shut-off valves.

InstallationGeneral InformationSafety
ServiceOptional Equipment 
 
 
 

13600124 A

Slider