Vacuum Lifting Pad Attachments
Featuring Rectangular Vacuum Cups
ANVER Vacuum Lifters can be outfitted with a variety of Interchangeable Vacuum Pads and Vacuum Lifting Attachments for a wide range of material handling applications. Various single and multiple vacuum pad configurations can be installed on most of our standard vacuum generators. The below Vacuum Lifting Pad Attachments feature ANVER’s proprietary rectangular vacuum cups with soft, long lips and deep profile are specifically designed for handling flat, rigid materials such as sheet and plate. They are also excellent for wood, composites, curved panels, stone and other materials. They feature a excellent, versatile design for most applications. NOTE: Any pad attachments used with EZ-Tilt-(Series) vertical attachments MUST USE Vertical Capacity listed. |
Specifications for Single Vacuum Pad Attachments:
*The cup capacities shown above are based on 24″ in. Hg (unless stated) at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright).
Actual capacity will vary based on the load surface and the level of vacuum.
13600090 A
Specifications for Dual Pad Vacuum Pad Attachments:
*The cup capacities shown above are based on 24″ in. Hg (unless stated) at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright).
Actual capacity will vary based on the load surface and the level of vacuum.
Adjustment Knobs | |||
Product Photo |
Part Number |
Description | |
KNM16X50P | Hand Knob, M16 x 50MM Stud, Black Plastic Replaces HDLM16X50ZRAT & HDLM16X60ZRAT |
||
KNM12X45P | Hand Knob, M12 x 45MM Stud, Black Plastic Replaces for HDLM12X40ZRAT |
||
KNM12X35SP | Hand Knob, M12 x 35MM Stud, Small Black Plastic Replaces HDLM12X40ZRAT, HDLM12X30ZRAT & KNM12X45SP |
13600091 A
Specifications for Dual Pad – Multi Position Vacuum Pad Attachments:
Compact pad attachment with multi-configuration suspension, easily changes pattern by means of a clevis pin into one or multiple two pad configurations. Typically used on small, heavy loads. Maximum load size should not exceed 3x the pad attachment outer dimension. NOTE: Not compatible with EZ-Tilt-(Series) attachments. |
SINGLE PAD |
||
DUAL PAD – INSIDE MOUNTING
|
DUAL PAD – OUTSIDE MOUNTING
|
Product Photo (Click to Enlarge) |
Anver Part Number |
Pad Arrangement |
Capacity lbs (kg) |
Unit Weight lbs (kg) |
Vacuum Pad(s) Mounting Location | Pad(s) Position | A Outside for Dual Pads in. (mm) |
B Pad Length in. (mm) |
C Pad Width in. (mm) |
D |
E Hardware Mounting Centers in. (mm) |
F Headroom in. (mm) |
G Mounting Hole Diameter in. (mm) |
||
PA1220-2-2MC | Single Pad | 1100 (499) |
54 (25) |
Center | Perpendicular / In-line | N/A | 20.5 (521 |
12.1 (307) |
29 (737) |
9 (229) |
6.38 (162) |
.69 (17) |
|||
Dual Pad | 2200 (998) |
74 (34) |
Inner | Perpendicular Only | 26.1 (663) |
||||||||||
Outer | Perpendicular | 34.1 (867) |
|||||||||||||
In-line | 42.5 (1079) |
*The pad capacities shown above are based on 24″ in. Hg at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright).
Actual capacity will vary based on the load surface and the level of vacuum.