Vacuum Cups and Suction Cups VP Series – Large Vacuum Pads with Bolt-On Seals
Specifications for VP Series Vacuum Pads:
Pad Number (Material) [Drawing No.]
Replacement Seal Number
A Pad Dia. in. (mm)
Mounting Bolt Pattern L X W in. (mm)
C in. (mm)
D in. (mm)
Vacuum Port NPT
Gauge Port NPT
Weight lb (kg)
*Horizontal Rated Load lb (kg)
VP185MQ-NBR-M (Nitrile) [76201093]
SR-185M
18.50 (470)
8.0 X 6.0 (203 X 152)
0.54 (14)
2.10 (53)
3/8″
1/4″
46 (21)
1300 (591)
*NOTE: Rated load capacity at 24″ Hg vacuum when used in the horizontal plane, and based on a safety factor of 2. Divide again by 2 for vertical applications. Actual capacity depends on load surface and condition of the vacuum generating system, and must be determined by the user.
**NOTE: SR (Series) M replacement seals include plastic spacers. This is required to prevent clamping ring hardware from being over torqued and seal from being over compressed. See sheet 1300277 for more information.