Assembly of Bottling Pick-Up Heads and Bottling Grippers in Series
ANVER Bottling Grabs are commonly used by installing them into Holding Plates, enabling the pickup of multiple bottles in unison, in a controlled fashion, for pick-and-place in assembly line production applications.
To Disassemble Bottle Grab and Install on Holding Plate:
Grasp part (1) and pull down against tension of spring; unscrew (2) from center shaft.
Gently let (3) ride up until spring tension is released.
Unscrew (3) from (1).
Insert bottom half of assembly [with 1)] through hole in Holding Plate from bottom. Place (2) and (3) back on shaft/spring, compress spring and re-attach (2) to center shaft to hold assembly together so that (3) can be screwed back into (1) to hold Bottle Grab Assembly securely on Holding Plate.
