GF-Series Heavy Duty Electric Powered Vacuum Generator Lifting Frames 15 Ton (13608 kg)
The GF Series generators incorporate the latest in sophisticated lifting technology for the handling industry, increasing speed, productivity and efficiency. Available in electric and battery powered. Vac-Packs can be replaced in minutes to minimize downtime in case of service. The GF-Series speeds production due to a large reservoir allowing the lifter to attach almost instantly, decreasing attach time. The large reservoir not only increases efficiency but also increases safety in the case of power failure due to the vacuum that remains in the system.
Your choice of FOUR control styles to suit your application:
Electric Self-Cycling Attach/Release
Instant attach/release is provided via the hoist up and down movement. The attach and release alternate each lift cycle for fast, efficient handling. Similar to our line of Mechanical Generators. Click here to find out more about Electric Self-Cycling.
Features:
No Pendant or Radio Controls Required for Attach/Release.
Extremely Safe. Load cannot be released until it is set down on a surface.
Simple to operate.
Optional Controls
Radio Controlled 3 Button Attach / Release / Interlock Transmitter with Plug-In Receiver Hand held device with attach, release and safety interlock push buttons with holster mounted on front handlebar. Plug-in receiver is mounted on side of vacuum generator. Contact Factory for more information.
Includes:
Radio Control Transmitter and Mounting Holster
Radio Control Receiver and Mounting Bracket
Plug-In Attach / Release / Interlock Control Pendant Attach/Release momentary switch and safety interlock push-button located on control pendant with 10ft long coiled cord.
Includes:
Pendant Control and Mounting Holster
Plug-In, Replaceable Coil Cord, 10 ft. long.
Plug-In Harness, Customer Radio Receiver Interface Control Harness allows you to wire your own radio receiver for integration of Attach / Release / Interlock.
Includes:
Cord, 3 ft. long.
Generator shown with ESC Electric Self-Cycling Control
Features:
State-of-the-art Vacuum Control which minimizes vacuum pump use greatly increasing number of hours between servicing.
Dual redundancy safety Lock-out Lifting Bail that requires operator to first set the unit down before they release the load.
Front Control Panel and Gauges
Indicator Lights
Vacuum Retention
Thermal Overload Protection
Ergonomic Adjustable Front Handlebar
Audible Vacuum Leakage Warning System
For Electrical Power Requirements refer to individual vacuum generator series pages (see table below).
Click for Video
