ANVER Vacuum Material Handling

Self-contained vacuum stations with high-flow vacuum pumps and energy saver circuitry are perfect for custom jigs, special lifters, hold down clamping, and anywhere a large capacity vacuum station is required.

ANVER’s VPEHE Vac-Packs are suitable for handling non-porous to porous loads. Designed for use with a wide assortment of lifter assemblies, these high quality Vac-Packs are ruggedly designed for heavy production use. Units are available for heavy duty frames or for stand-alone vacuum stations.

Your choice of FOUR control styles to suit your application:

Standard Controls
Click for Video	Electric Self-Cycling Attach/Release Instant attach/release is provided via the hoist up and down movement. The attach and release alternate each lift cycle for fast, efficient handling. Similar to our line of Mechanical Generators. Click here to find out more about Electric Self-Cycling. Features: No Pendant or Radio Controls Required for Attach/Release. Extremely Safe. Load cannot be released until it is set down on a surface. Simple to operate.
Optional Controls
	Radio Controlled 3 Button Attach / Release / Interlock Transmitter with Plug-In Receiver Hand held device with attach, release and safety interlock push buttons with holster mounted on front handlebar. Plug-in receiver is mounted on side of vacuum generator.  Contact Factory for more information. Includes: Radio Control Transmitter and Mounting Holster Radio Control Receiver and Mounting Bracket
	Plug-In Attach / Release / Interlock Control Pendant Attach/Release momentary switch and safety interlock push-button located on control pendant with 10ft long coiled cord. Includes: Pendant Control and Mounting Holster Plug-In, Replaceable Coil Cord, 10 ft. long.
	Plug-In Harness, Customer Radio Receiver Interface  Control Harness allows you to wire your own radio receiver for integration of Attach / Release / Interlock. Includes: Cord, 3 ft. long.

Safety Features

• Load Sensitive Lifting Bail with Safety Lock-Out Switch
  For generator with GF(Series)T lifting frames, pendant controls are only active when the lifter is lowered completely and there is no load on the lifting shackle. This eliminates the risk of accidental release of a suspended load by the operator. (Feature is not present for generators used on vacuum stations.)

• Vacuum Control
  A solid-state Vacuum Control  combines all the required vacuum generator controls in one rugged unit. This controls all vacuum pump functions, safety lights, and is fitted with a standard audible vacuum leakage warning system.

• Audible Vacuum Leakage Warning System
  Integrated electronically controlled vacuum loss sensor monitors vacuum level and will sound an alarm if a slow vacuum leak is present and the vacuum level drops to a pre-determined set point.

• Vacuum Retention
  The system includes an internal check valve to stop loss of vacuum in the event of a power failure (non-porous loads). A 30 gallon (6939 cu. in.) vacuum reservoir is provided (Only on ‘-30G’ models if applicable) to assist in maintaining a safe vacuum level during a power failure (non-porous loads).

Generator shown with Pendant Controls

Additional Features

• Front Control Panel and Gauges
  All gauges, lights, and power switches are mounted on the front of the control panel. The two vacuum gauges on the face of the panel display the level of vacuum in the manifold and in the reservoir.

• Indicator Lights – Front Enclosure, Left & Right Auxiliary
  Green light indicates “Safe” vacuum level.
  Red light indicates “Unsafe” vacuum level.
  White light indicates “Power On.”

Maintenance

• Electrical Enclosure Door
  All generators provided with a hinged electrical enclosure door for easy access to electrical components.

• Moisture Trap / Air Filters
  Mounted outside of the electrical enclosure are (2) over-sized screw-on clear filter bowls for easy inspection and cleaning.

Vacuum Pump (PMPHE Series)

• All vacuum pumps are oil-less rotary vane type. Pump motors are thermally overload protected. (See charts below for vacuum pump specifications.)