ANVER Vacuum Material Handling

Vacuum Generators and Vacuum Stations
Self-Contained Battery Powered Vacuum Stations
BAE1-GEN3 Series with ANVER Vacuum Control Module & Safety Lock-Out

ANVER’s BAE1-GEN3 Series Vac-Pack Vacuum Generator contains many of the same features as the standard VPE1-GEN3 Series. Designed for use with a wide assortment of vacuum pad attachments and lifter assemblies, the BAE1-GEN3 Series includes a rechargeable, heavy duty 12 volt DC 79 amp hour battery, making it suitable for handling non-porous loads. It is commonly used for special applications where AC power is not readily available.

Safety Features:

• Load Sensing Lifting Bail with Safety Lock-Out
  Pendant controls are only active when the lifter is lowered completely and there is no load on the bail.  This eliminates the risk of accidental release of a suspended load by the operator. (Feature not present on the BAE1-GEN3-RD Series, which is a standalone version, or the BAE1-GEN3-T, which is a tilter version.)
• Vacuum Control
  A solid-state Vacuum Control combines all the required vacuum generator controls in one rugged unit. This controls all vacuum pump functions, safety lights and is fitted with a standard audible vacuum leakage warning system.
• Energy Saver Technology
  A vacuum-controlled valve shuts off the vacuum pump when the pre-set vacuum level is reached, reducing wear and tear on the pump.

• Audible Vacuum Leakage Warning System
  Integrated electronically controlled vacuum leakage sensor monitors vacuum level and will sound an alarm if a slow vacuum leak is present when the vacuum level drops to a pre-determined set point.
• Vacuum Retention
  The system includes an internal check valve to stop leakage of vacuum in the event of a power failure (non-porous loads). A 627 cu. in. vacuum reservoir assists in maintaining a safe vacuum level during a power failure (non-porous loads).

Additional Features:

• Front Control Panel and Gauges
  All gauges, lights and power switches are mounted on the front of the control panel. The two vacuum gauges on the face of the panel display the level of vacuum in the manifold and in the reservoir.
• Indicator Lights
  Green light indicates “safe” vacuum level.
  Red light indicates “unsafe” vacuum level.
  White light indicates “power on.”

Generator shown with Radio Controls

Your choice of FOUR control styles to suit your application:

Standard Controls
Click for Video	Electric Self-Cycling Attach/Release Instant attach/release is provided via the hoist up and down movement. The attach and release alternate each lift cycle for fast, efficient handling. Similar to our line of Mechanical Generators. Click here to find out more about Electric Self-Cycling. Features: No Pendant or Radio Controls Required for Attach/Release. Extremely Safe. Load cannot be released until it is set down on a surface. Simple to operate.
Optional Controls
	Radio Controlled 3 Button Attach / Release / Interlock Transmitter with Plug-In Receiver Hand held device with attach, release and safety interlock push buttons with holster mounted on front handlebar. Plug-in receiver is mounted on side of vacuum generator.  Contact Factory for more information. Includes: Radio Control Transmitter and Mounting Holster Radio Control Receiver and Mounting Bracket
	Plug-In Attach / Release / Interlock Control Pendant Attach/Release momentary switch and safety interlock push-button located on control pendant with 10ft long coiled cord. Includes: Pendant Control and Mounting Holster Plug-In, Replaceable Coil Cord, 10 ft. long.
	Plug-In Harness, Customer Radio Receiver Interface  Control Harness allows you to wire your own radio receiver for integration of Attach / Release / Interlock. Includes: Cord, 3 ft. long.