Rectangle Foam Pad Attachments with ANDURASOFT® Foam Seals

Standard Rectangle Foam Pad Attachments
ANDURASOFT® Foam Seal Vacuum Pad Attachments for Electric and Air-Powered Vacuum Generators

Foam Seal Vacuum Pad Attachments
ANVER’s ANDURASOFT® foam seal vacuum pad attachments are designed for handling rough, moderately uneven load surfaces such as saw cut or flamed stone, rough wood, fiberglass web and concrete. They can also handle smooth stone surfaces if used for both smooth and rough stone.

The ANDURASOFT® foam seals themselves fit into a snap lip so they will stay on firmly even in the vertical position. Changing seals can be done in under a minute by hand without tools making this system perfect for critical job site installation schedules. The economical replaceable ANDURASOFT® foam seals readily conform to rough, uneven surfaces to create as vacuum tight a seal as possible.

The pad attachments are rated at a conservative 22″ Hg vacuum unlike the 24″ Hg used on traditional cups. They are then either divided by two for horizontal or four for vertical handling. Made in USA by ANVER.

Features

A range of Standard Interchangeable Pad Attachments with ANDURASOFT® Foam Seals which can be quickly changed as needed with a two nut-and-bolt mounting.
Snap lip to ensure the seal stays in position. Long lasting foam seals handle both smooth and rough stone.
Replacing worn seals can be done in under a minute by hand without tools.
Replacement seals are in stock for immediate shipping.

NOTE: Any pad attachments used with EZ-Tilt-(Series) attachments MUST USE Vertical Capacity listed.

NOTE: Foam sealing rings are not included with vacuum pads and attachments. Because we have so many different foam seals, they must be selected and purchased separately. They are normally quoted per application. Contact factory for more information.

Single Foam Pad Attachments for ANDURASOFT® Foam Seals

Figure F Figure G
	Product Photo (Click to Enlarge)	Vacuum Pad Number*	Rated Load Capacity* (Horizontal) lb (kg)	A Standard Replacement Seal Number (Not Included)	Approx. Weight lbs (kg)	Drawing Diagram (above)	Dimensions		C Height in. (mm)	D Mounting Centers in. (mm)	F Quick Disconnect/ Port Size NPT
							B1 Width in. (mm)	B2 Length in. (mm)
		FPA040110G33 (76400670) Shown with optional Foam Sealing Ring K3R	100 (45)	FR040110-K3R Standard (24531450)	6.2 (2.8)	Figure F	4 (102)	11 (279)	2.64 (67)	9 (229)	3/8″
		FPA040160G33 (76400671) Shown with optional Foam Sealing Ring K3R	170 (77)	FR040160-K3R Standard (24531451)	7.3 (3.3)	Figure F	4 (102)	16 (406)	2.64 (67)	9 (229)	3/8″
		FPA050120G33 (76400672) Shown with optional Foam Sealing Ring K3R	170 (77)	FR050120-K3R Standard (24531452)	7.3 (3.3)	Figure F	5 (127)	12 (305)	2.64 (67)	9 (229)	3/8″
		FPA050160G33 (76400673) Shown with optional Foam Sealing Ring K3R	225 (102)	FR050160-K3R Standard (24531453)	8.4 (3.8)	Figure F	5 (127)	16 (406)	2.64 (67)	9 (229)	3/8″
		FPA060180G33 (76400674) Shown with optional Foam Sealing Ring K3R	350 (159)	FR060180-K3R Standard (24531454)	10.3 (4.7)	Figure F	6 (152)	18 (457)	2.64 (67)	9 (229)	3/8″
		FPA070200G33 (76400564) Shown with optional Foam Sealing Ring K1R	500 (227)	FR070200-K1R Standard	14.6 (6.6)	Figure F	7.13 (181)	20.13 (511)	3.69 (94)	9.00 (228)	3/8″
				FR070200-K2C2 (24531083)
		FPA100140G33 (76400563) Shown with optional Foam Sealing Ring K1R	500 (227)	FR100140-K1R Standard	18.05 (8.19)	Figure G	10.13 (257)	14.13 (359)	3.56 (90)	9.00 (228)	3/8″
				FR100140-K2C2 (24531084)
		FPA100190G33 (76400566) Shown with optional Foam Sealing Ring K1R	750 (340)	FR100190-K1R Standard	22.91 (10.39)	Figure G	10.13 (257)	19.13 (486)	3.56 (90)	9.00 (228)	3/8″
				FR100190-K2C2 (24531085)
		FPA100250G33 (76400565) Shown with optional Foam Sealing Ring K1R	1000 (454)	FR100250-K1R Standard	32.99 (14.97)	Figure G	10.13 (257)	25.13 (638)	3.56 (90)	9.00 (228)	3/8″
				FR100250-K2C2 (24531086)
		FPA120210G33 (76400570) Shown with optional Foam Sealing Ring K1R	1000 (454)	FR120210-K1R Standard	33.33 (15.11)	Figure G	12.13 (308 )	21.13 (537)	3.56 (90)	9.00 (228)	3/8″
				FR120210-K2C2 (24531087)
		FPA120290G33 (76400572) Shown with optional Foam Sealing Ring K1R	1500 (680)	FR120290-K1R Standard	45.87 (20.81)	Figure G	12.13 (308)	29.13 (740)	3.56 (90))	9.00 (228)	1/2″
				FR120290-K2C2 (24531088)
		FPA140320G33 (76400583) Shown with optional Foam Sealing Ring K1R	2000 (907)	FR140320-K1R Standard	54.03 (24.51)	Figure G	14.13 (359)	32.13 (816)	3.56 (90)	9.00 (228)	1/2″
				FR140320-K2C2 (24531090)

Note: Consult factory for alternate configurations.

*The cup capacities shown above are based on 22″ Hg at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright). Vertical Load Capacity is half of the listed Horizontal Load Capacities above. Rated Load Capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum.
**Replaceable Foam Seal. For information and application recommendations please visit web page.

13600097 B

Specifications for Dual Foam Pad Vacuum Pad Attachments:

In-Line Models Only

In-Line/Perpendicular Models Only

Product
Photo

Anver Part
Number

Rated
Load
lb
(kg)*

A
Standard
Replacement
Seal Number
(Not Included)

Unit
Weight
lb (kg)

Pad
Layout

A
Outside
in. (mm)

B
Pad
Length
in. (mm)

C
Pad
Width
in. (mm)

D
Beam
Length
in. (mm)

E
Hardware
Mtg
Centers
in. (mm)

F
Headroom
in. (mm)

G
Mtg
Hole
Dia.
in.
(mm)

Max.

Min.

FPA040110-2-24-3
(76400689)

200
(91)

FR040110-K3R

T.B.D.

30.66
(778)

24.5
(622)

11
(279)

4
(102)

24
(610)

9
(229)

5.16
(131)

.69
(17)

FPA040110-2-36-3
(76400689)

200
(91)

FR040110-K3R

T.B.D.

42.66
(1083)

36.5
(927)

11
(279)

4
(102)

36
(914)

9
(229)

5.16
(131)

.69
(17)

FPA040160-2-24-3
(76400690)

340
(154)

FR040160-K3R

T.B.D.

34.17
(867)

32
(813)

16
(406)

4
(102)

24
(610)

9
(229)

5.45
(139)

.69
(17)

22.17
(563)

18.99
(482)

FPA040160-2-36-3
(76400690)

340
(154)

FR040160-K3R

34
(16)

46.17
(1172)

32
(813)

16
(406)

4
(102)

36
(914)

9
(229)

5.45
(139)

.69
(17)

34.17
(867)

18.99
(482)

FPA050120-2-24-3
(76400691)

340
(154)

FR050120-K3R

T.B.D.

31.66
(804)

25.5
(647)

12
(305)

5
(127)

24
(610)

9
(229)

5.16
(131)

.69
(17)

FPA050120-2-36-3
(76400691)

340
(154)

FR050120-K3R

T.B.D.

43.66
(1108)

37.5
(953)

12
(305)

5
(127)

36
(914)

9
(229)

5.16
(131)

.69
(17)

FPA050160-2-24-3
(76400692)

450
(204)

FR050160-K3R

32
(15)

34.16
(868)

32
(813)

16
(406)

5
(127)

24
(610)

9
(229)

5.45
(139)

.69
(17)

23.16
(588)

20
(508)

FPA050160-2-36-3
(76400692)

450
(204)

FR050160-K3R

T.B.D.

46.16
(1172)

32
(813)

16
(406)

5
(127)

36
(914)

9
(229)

5.45
(139)

.69
(17)

35.16
(35.16)

20
(508)

FPA060180-2-36-3
(76400693)

700
(318)

FR060180-K3R

T.B.D.

47.2
(1199)

38.8
(986)

18
(457)

6
(152)

36
(914)

9
(229)

7.08
(180)

.69
(17)

34.2
(869)

22.8
(579)

FPA060180-2-48-3
(76400693)

700
(318)

FR060180-K3R

T.B.D.

59.2
(1504)

38.8
(986)

18
(457)

6
(152)

50
(1270)

9
(229)

7.08
(180)

.69
(17)

46.2
(1173)

22.8
(579)

FPA070200-2-36-3
(76400694)

1000
(454)

FR070200-K1R
Standard

T.B.D.

49.3
(1252)

40
(1016)

20.13
(511)

7.13
(181)

36
(914)

9
(229)

7.08
(180)

.69
(17)

FR070200-K2C2
(24531090)

36.3
(922)

24
(610)

FPA070200-2-48-3
(76400694)

1000
(454)

FR070200-K1R
Standard

T.B.D.

61.3
(1557)

40
(1016)

20.13
(511)

7.13
(181)

50
(1270)

9
(229)

7.08
(180)

.69
(17)

FR070200-K2C2
(24531090)

48.3
(1227)

24
(610)

*The cup capacities shown above are based on 22″ in. Hg (unless stated) at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright).
Actual capacity will vary based on the load surface and the level of vacuum.

Adjustment Knobs
	Product Photo	Part Number	Description
		KNM16X50P	Hand Knob, M16 x 50MM Stud, Black Plastic Replaces HDLM16X50ZRAT & HDLM16X60ZRAT
		KNM12X45P	Hand Knob, M12 x 45MM Stud, Black Plastic Replaces for HDLM12X40ZRAT
		KNM12X35SP	Hand Knob, M12 x 35MM Stud, Small Black Plastic Replaces HDLM12X40ZRAT, HDLM12X30ZRAT & KNM12X45SP