ANVER Vacuum Cups, Vacuum Lifters, Vacuum Pumps, Vacuum Tube Lifters, Vacuum Sheet and Plate Lifters, Vacuum End-EffectorsVacuum Cups and Suction Cups
Suction Cup Level Compensator Mounting Brackets
Universal SLSA Mounting Brackets for Aluminum Extrusions of All Types

Print This Page

 

We designed these brackets to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of bracket is not available from other companies because it is specific to our vacuum cup suspensions.

Our brackets are made of tumbled and anodized 1/4″ (6 mm) aluminum, and our ANVER SLSA Series Spring Level Compensators fit right into the end. These brackets are designed to be used with any number of aluminum extrusion systems manufactured by other companies. Our brackets are designed for either inch or metric, 25 mm, 28 mm and approx. 40 mm sizes. Simply add two typical 8 mm bolt clamps (not included) for your particular brand to easily make an EOAT (end of arm tool). The brackets can be adjusted and locked into position on the top or bottom of the extrusion rail.
SLSA
SLSA-1 in Action		 SLSA
SLSA-2 in Action		 SLSA
Mounting Components
Fit Popular “EOAT”
Aluminum Extrusions

Product
Photo
(Click to Enlarge)		 Part No. A
in.
(mm)
Hole Dia		 B
in.
(mm)		 C
in.
(mm)		 Description Level
Compensator
Suspensions		 Weight
lb
(grams)

Brackets for SLSA-1 Suspensions

d

 sd 28500230 0.48
(12.7)		 2.00
(50.8)		 5.00
(127)		 Mounting Bracket for SLSA-1 Alum – 2 x 5 x 0.48 d 0.170
(77)

d

 d 28500232 0.48
(12.7)		 1.00
(25.4)		 4.00
(102)		 Mounting Bracket for SLSA-1 Alum  – 1 x 4 x 0.48 dd 0.141
(64)

 

Product
Photo
(Click to Enlarge)		 Part No. A
in.
(mm)
Hole Dia		 B
in.
(mm)		 C
in.
(mm)		 Description Level
Compensator
Suspensions		 Weight
lb
(grams)

Brackets for SLSA-2 Suspensions

SLSA-2 Suspensions

 SLSA-2 Suspensions 28500239 0.64
(16.2)		 2.00
(50.8)		 5.00
(127)		 Mounting Bracket for SLSA-2  Alum – 2 x 5 x 0.64 SLSA-2 Suspensions 0.166
(75)

SLSA-2 Suspensions

 SLSA-2 Suspensions 28500240 0.64
(16.2)		 1.00
(25.4)		 4.00
(101.6)		 Mounting Bracket for SLSA-2  Alum – 1 x 4 x 0.64 SLSA-2 Suspensions 0.137
(62)

 

Product
Photo
(Click to Enlarge)		 Part No. A
in.
(mm)
Hole Dia		 B
in.
(mm)		 C
in.
(mm)		 Description Level
Compensator
Suspensions		 Weight
lb
(grams)

Brackets for SLSA-3 Suspensions

SLSA3

 SLSA3 28500231 0.75
(19.0)		 2.00
(50.8)		 5.00
(127)		 Mounting Bracket for SLSA-3 Alum – 2 x 5 x 0.75 SLSA3 0.163
(74)

SLSA3

 SLSA3 28500233 0.75
(19.0)		 1.00
(25.4)		 4.00
(102)		 Mounting Bracket for SLSA-3 Alum – 1 x 4 x 0.75 SLSA3 0.135
(61)

 

Product
Photo
(Click to Enlarge)		 Part No. A
in.
(mm)
Hole Dia		 B
in.
(mm)		 C
in.
(mm)		 Description Level
Compensator
Suspensions		 Weight
lb
(grams)

Brackets for SLSA-4 Suspensions
SLSA3 28500580 0.9
(23)		 100
(25.4)		 4.00
(102)		 Mounting Bracket for SLSA-4 s;sa4 0.127
(58)

 

 

Note: If the above do not suit the requirements of your design, we also make custom mounting brackets on request.

Adjustable SLSA Suspension Bracket Hanger Kits for 40 mm Aluminum Extrusions

These Suspension Bracket Hanger Kits are designed to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of suspension bracket hanger kit is not available from other companies because it is specific to our vacuum cup suspensions.

Our suspension bracket hanger kits are made of tumbled and anodized 1/4″ aluminum, and our ANVER SLSA Series Spring Level Compensators fit right into the end. These brackets are designed for  approx. 40 mm size aluminum extrusions. The brackets can be adjusted and locked into position on the top or bottom of the extrusion rail. Mounting plates for this style are also available.
Product
Photo
(Click to Enlarge)		 Part No. A
in.
(mm)
Hole Dia		 B
in.
(mm)		 C
in.
(mm)		 Description Level
Compensator
Suspensions		 Weight
lb
(grams)
 Bracket Hangers for SLSA-1 Suspensions
slsa-1 72300040 0.48
(12.2)		 – 3.15
(80)		 Suspension Bracket Hanger Kit for SLSA-1 Series slsa-1 0.324
(147)
slsa-1 28500243 0.48
(12.2)		 – 3.15
(80)		 Mounting Plate to Mount SLSA-1 Series to Aluminum Extrusion slsa-1 0.194
(85)
SLSA-1 Product
Photo
(Click to Enlarge)		 Part No. A
in.
(mm)
Hole Dia		 B
in.
(mm)		 C
in.
(mm)		 Description Level
Compensator
Suspensions		 Weight
lb
(grams)
Bracket Hangers for SLSA-2 Suspensions
SLSA-2 Suspensions 72300032 0.48
(12.2)		 – 3.15
(80)		 Suspension Bracket Hanger Kit for SLSA-2 Series SLSA-2 Suspensions 0.323
(147)
SLSA-2 Suspensions 28500244 0.64
(16.3)		 – 3.15
(80)		 Mounting Plate to Mount SLSA-2 Series to Aluminum Extrusion SLSA-2 Suspensions 0.193
(88)
SLSA-1 Product
Photo
(Click to Enlarge)		 Part No. A
in.
(mm)
Hole Dia		 B
in.
(mm)		 C
in.
(mm)		 Description Level
Compensator
Suspensions		 Weight
lb
(grams)
Bracket Hangers for SLSA-3 Suspensions
SLSA-3 Suspensions 72300041 0.75
(19.0)		 – 3.15
(80)		 Suspension Bracket Hanger Kit for SLSA-3 Series SLSA-3 Suspensions 0.305
(138)
SLSA-3 Suspensions 28500245 0.75
(19.0)		 – 3.15
(80)		 Mounting Plate to Mount SLSA-3 Series to Aluminum Extrusion SLSA-3 Suspensions 0.175
(79)

Note: If the above do not suit the requirements of your design, we also make custom mounting brackets on request.