ANVER Vacuum Switches, Vacuum Loss Sensors and Electric Vacuum ValvesVacuum System Components
JTSED-W Electronic Vacuum Switch with Digital Readout

JTSED-W Electronic Vacuum Switch with Digital Readout

The JTSED-W Electronic Vacuum Switch converts the vacuum level into digital output for connection to PLC systems as well as into analog output for the on/off control. The JTSED-W Electronic Vacuum Switch is identical to the JTSE Switch except for the addition of a digital LED display.

  • Input voltage: 10 – 24 V DC
  • Accuracy: ±3.0% F.S.

 

Part Number Schematic
JTSED-W

The JTSED-W Digital Vacuum Switch mounts easily and conveniently under the nozzle and muffler of ANVER JB Series Vacuum Generators. The switch is provided with 4.9 ft (1.5m) of connection cable.

 

Specifications for JTSED-W Vacuum Switch

Media Non-Corrosive gases and Non-Lubricated air
Power Supply 10.8 ~ 26.4 V DC, ripple (P-P) 10% max., Reverse Voltage Protection
1 Switch Output N.C., max. 125 mA, LED indication on display, PNP version
Display 2 digit
Pressure Units kPa
Hysteresis ± 0.5% F.S.
Electrical Connection Grommet Lead Wire
Air Connection M5 Female and G1/8″ Male – Standard
Operation Accuracy ± 3% F.S.
Thermal Error ± 3% F.S. in range 0 ~ 50°C (32 ~ 122°F)
Response Time < 5 ms
Current Consumption < 35 mA
Dielectric Strength 500 V AC 1 min
Insulation Resistance > 100 M ohm at 500 V DC
Interference Emission As Per DIN EN 50081-1
Immunity to Interference As Per DIN EN 50082-2
Operating Temperature Range 0 ~ 60°C (32 ~ 140°F)
Storage Temperature Range -10 ~ 70°C (14 ~ 158°F)
Operating Humidity Range 10 ~ 85 % RH
Vibration 10~55 Hz 1.5 mm (0.06″), XYZ, 2hrs
Mass 35 g (1.24 oz)
Weight 50 Grams

 

Electronic Vacuum Switch with Digital Readout and Male Connector

JTSED-W Electronic Vacuum 
Switch with standard G1/8″ 
male connector