Sensor Type |
Vacuum pressure 101 kPa type |
Type of Pressure |
Gauge pressure |
Rated Pressure Range |
0 to – 101.3kPa |
Set Pressure Range |
5.1 to -101.3kPa |
Maximum Pressure Rating |
490kPa |
Applicable Fluid |
Non-corrosive gas |
Selectable Units |
kgf/cm2, bar, psi, mmHg, inHg |
Supply Voltage |
12 to 24V DC % Ripple P-P 10% or less |
Current Consumption |
50mA or less |
Comparative Outputs Comparative Output 1 Comparative Output 2 |
Standard PNP output PNP open-collector transistor • Maximum source current: 100mA • Applied voltage: 30V DC or less (between comparative output and +V) • Residual voltage: 2V or less (at 100mA source current) |
Output Modes |
Equipped with 4 types of modes: hysteresis mode, window comparator mode, dual output mode, automatic sensitivity setting mode (selectable by key operation) |
Hysteresis |
1 digit (variable in hysteresis mode and 2 digits when using psi unit) |
Repeatability |
Within ±0.2% F.S .±1 digit |
Response Time |
2.5ms or less |
Short-Circuit |
Protection Incorporated |
Analog Voltage Output
Output Impedance: 1kW approx. |
Output voltage:1 to 5V(over rated-pressure range) Zero-point: within 1V ±5% F.S. Span: within 4V ±5% F.S. Linearity: within ± 1% F.S |
Display |
3½ digit red LED display (Sampling rate: 4 times/sec. approx.) |
Displayable Pressure Range |
5.1 to -101.3kPa |
Analog Bar Display |
LED bar display in steps of 10% F.S. approx. |
Operation Indicators Comparative Output 1 Comparative Output 2 |
Orange LED (lights up when Comparative Output 1 is ON) Green LED (lights up when Comparative Output 2 is ON) |
Protection |
IP40 (IEC) |
Ambient Temperature |
-10 to + 50°C (no dew condensation or icing allowed). Storage: -10 to + 60°C |
Ambient Humidity |
35 to 85% RH. Storage: 35 to 85% RH |
Temperature Characteristics |
Over ambient temperature range -10 to + 50°C: within ± 1 % F.S. of detected pressure at 20°C |
Pressure Port |
NPTF 1/8 female thread |
Material |
Front case: ABS • Rear case: PPS (glass fiber reinforced) Display surface: Acrylic • Pressure port attachment: Die-cast zinc alloy |
Cable |
0.15mm² 5-core oil-resistant cabtyre cable, 2m long |
Cable Extension |
Extension up to total l00m is possible with 0.3mm², or more, cable |
Weight |
95g approx. |
Accessories |
One (1) Hexagon-socket-head plug for pressure port |