|
Vacuum Cups and Suction Cups
Vacuum Cup Fittings – Group 3
Fittings which Push-In from the Bottom for ANVER Group 3 Universal Suction Cups
|
|
-
ANVER divides small universal suction cup fittings into three groups based on mounting specifications and style. Group 3 Fittings, shown here, are those that push in from the bottom, exposing a male thread at the top of the cup.
-
Within each vacuum fitting group, the hardware is interchangeable with all other cups within the group. Any Group 3 fitting will fit any Group 3 cup.
-
These all-metal, electro-less nickel-plated brass fittings are reusable. Once you buy the cups with fittings. you only need to buy replacement rubber cups in the future.
-
The cup is held from the bottom flange of the fitting, which is screwed into a female connection above the cup to hold it tight. Replacement takes only a few seconds – simply unscrew the fitting, replace the cup, and screw the fitting back on using your hand or screw driver.
-
These specific cup fittings are top-quality production grade fittings made by ANVER Corp in the USA.
|
Group 3 Vacuum Cup Fittings:
 |
The “G” thread is also known as BSPP, commonly used world-wide for Vacuum Applications. |
Other Adapter Fittings for Other Connections:
Female-to-Female
Adapters |
Female-to-Male
Adapters |
Male-to-Male
Adapters |
Group 1 Vacuum
Cup Fittings |
Group 2 Vacuum
Cup Fittings |
 |
 |
 |
 |
 |
Group 3 Fitting Washer Specifications:
 |
For Information on how to build ANVER Valve Cup Assemblies
using select Group 3 Fittings with ANVER Flat Cups F77, F85 and F95,
 Click here
|
Vacuum Cups that Use Group 3 Vacuum Fittings:
13600188 A
|
