Vacuum Cups and Suction Cups
P-Series – U Universal Vacuum Cups and Suction Cups
Vacuum Cup Materials
-
The standard materials are Nitrile and Silicone (as noted below each part number).
- For more information on the materials, click here.
For general purpose use on flat or slightly curved surfaces. Available in sizes from 0.21 to 2.03 inches (5.2 to 51.6 mm)
NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications.
|
|
 |
Product |
ANVER and P-Series |
Connection Thread Size |
Static Diameter* in. (mm) |
Compressed Diameter* in. (mm) |
Static Height* in. (mm) |
Compressed Height* in. (mm) |
Load Capacity at 24 in. Hg (609.6mm Hg) [2:1 Safety Factor] |
Pull-Off Capacity at 27 in. Hg (685.8mm Hg) [1:1 Safety Factor] lb (kg) |
Level Compensator Suspensions (Click Image for More Info) |
||
| U4 Cups | |||||||||||||
 |
 |
N/A | 0.21 (5.2) |
0.22 (5.5) |
0.26 (6.6) |
0.25 (6.4) |
67 grams |
0.29 (0.13) |
 |
||||
|
 |
U4-SIT |
N/A | 0.21 (5.2) |
0.22 (5.5) |
0.26 (6.6) |
0.25 (6.4) |
67 grams |
0.29 (0.13) |
|
|||
| U4 Cups with 4-8 Fitting | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U4-NEO/FITTING |
M5 Male | 0.21 (5.2) |
0.22 (5.5) |
N/A | N/A | 59 grams |
0.29 (0.13) |
|
||||
 |
U4-SIT/FITTING |
M5 Male | 0.21 (5.2) |
0.22 (5.5) |
N/A | N/A | 59 grams |
0.29 (0.13) |
|
||||
| Fittings for U4 Cups | Notes | Suspensions | |||||||||||
|
|
|
 |
BF3-OR |
The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market. |
|
||||||||
|
|
|
 |
BF3-SHEX |
The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market. |
|
||||||||
| U6 Cups | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
|
 |
N/A | 0.28 (7.1) |
0.29 (7.4) |
0.28 (7.2) |
0.26 (6.6) |
120 grams |
0.56 (0.25) |
|
||||
|
 |
U6-SIT |
N/A | 0.28 (7.1) |
0.29 (7.4) |
0.28 (7.2) |
0.26 (6.6) |
120 grams |
0.56 (0.25) |
|
|||
| U6 Cups with 4-8 Fitting | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U6-NEO/FITTING |
M5 Male | 0.28 (7.1) |
0.29 (7.4) |
N/A | N/A | 113 grams |
0.56 (0.25) |
|
||||
 |
U6-SIT/FITTING |
M5 Male | 0.28 (7.1) |
0.29 (7.4) |
N/A | N/A | 113 grams |
0.56 (0.25) |
|
||||
| Fitting for U6 Cups | Notes | Suspensions | |||||||||||
|
|
|
|
BF3-OR |
The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market. |
|
||||||||
|
|
|
|
BF3-SHEX |
The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market. |
|
||||||||
| U8 Cups | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
|
 |
N/A | 0.36 (9.0) |
0.38 (9.7) |
0.27 (6.8) |
0.23 (5.8) |
170 grams |
1.69 (0.77) |
|
||||
|
 |
U8-SIT |
N/A | 0.36 (9.0) |
0.38 (9.7) |
0.27 (6.8) |
0.23 (5.8) |
170 grams |
1.69 (0.77) |
|
|||
| U8 Cups with 4-8 Fitting | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U8-NEO/FITTING |
M5 Male | 0.38 (9.7) |
0.39 (10.0) |
N/A | N/A | 177 grams |
0.87 (0.39) |
|
||||
 |
U8-SIT/FITTING |
M5 Male | 0.38 (9.7) |
0.39 (10.0) |
N/A | N/A | 177 grams |
0.87 (0.39) |
|
||||
| Fitting for U8 Cups | Notes | Suspensions | |||||||||||
|
|
|
|
BF3-OR |
The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market. |
|
||||||||
|
|
|
|
BF3-SHEX |
The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market. |
|
||||||||
| U10 Cups | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
|
 |
N/A | 0.44 (11.1) |
0.44 (11.1) |
0.42 (10.5) |
0.39 (9.9) |
325 grams |
1.50 (0.68) |
|
||||
|
 |
U10-SIT |
N/A | 0.44 (11.1) |
0.44 (11.1) |
0.42 (10.5) |
0.39 (9.9) |
325 grams |
1.50 (0.68) |
|
|||
| U10 Cups with 10-15 Fitting | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U10-NEO/FITTING |
M5 Male | 0.44 (11.1) |
0.44 (11.1) |
N/A | N/A | 304 grams |
1.50 (0.68) |
|
||||
 |
U10-SIT/FITTING |
M5 Male | 0.44 (11.1) |
0.44 (11.1) |
N/A | N/A | 304 grams |
1.50 (0.68) |
|
||||
| Fitting for U10 Cups | Notes | Other Fittings | Suspensions | ||||||||||
 |
BM5 FITTING M5 MALE Replaces 10-15 FITTING A-3107030 31.07.030 01AC |
The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions. |
 |
|
|||||||||
 |
BM10-32 |
The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Popular alternate fitting for the North American market. |
|
|
|||||||||
| U15 Cups | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
|
 |
N/A | 0.65 (16.6) |
0.70 (17.6) |
0.48 (12.0) |
0.38 (9.5) |
1.1 lbs (0.49 Kg) |
2.47 (1.12) |
|
||||
|
 |
U15-SIT |
N/A | 0.65 (16.6) |
0.70 (17.6) |
0.48 (12.0) |
0.38 (9.5) |
1.1 lbs (0.49 Kg) |
2.47 (1.12) |
|
|||
| U15 Cups with Fitting | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U15-NEO/FITTING |
M5 Male | 0.65 (16.6) |
0.70 (17.6) |
N/A | N/A | 1.1 lbs (0.49 Kg) |
2.47 (1.12) |
|
||||
 |
U15-SIT/FITTING |
M5 Male | 0.65 (16.6) |
0.70 (17.6) |
N/A | N/A | 1.1 lbs (0.49 Kg) |
2.47 (1.12) |
|
||||
| Fitting for U15 Cups | Notes | Other Fittings | Suspensions | ||||||||||
| |
BM5 FITTING M5 MALE Replaces 10-15 FITTING A-3107030 31.07.030 01AC |
The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions. |
|
|
|||||||||
| |
BM10-32 |
The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Popular alternate fitting for the North American market. |
|
|
|||||||||
| U20 Cups | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
|
 |
N/A | 0.86 (21.8) |
0.90 (22.9) |
0.30 (7.6) |
0.20 (5.1) |
2.0 lbs (0.9 Kg) |
3.60 (1.63) |
 |
||||
 |
|||||||||||||
|
|
|
 |
U20-SIT |
N/A | 0.86 (21.8) |
0.90 (22.9) |
0.30 (7.6) |
0.20 (5.1) |
2.0 lbs (0.9 Kg) |
3.60 (1.63) |
|
||
| |
|||||||||||||
| U20 Cups with 20-30 Fitting | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U20-NEO/1PC FITTING |
G 1/8″ Male M5 Female | 0.86 (21.8) |
0.90 (22.9) |
N/A | N/A | 1.60 lbs (0.73 Kg) |
3.60 (1.63) |
|
||||
| |
|||||||||||||
 |
U20-SIT/1PC FITTING |
G 1/8″ Male M5 Female | 0.86 (21.8) |
0.90 (22.9) |
N/A | N/A | 1.60 lbs (0.73 Kg) |
3.60 (1.63) |
|
||||
| |
|||||||||||||
| U20 Cups with 20-30 Connection Plate | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U20-NEO/FIT/SCREEN |
G 1/8″ Male M5 Female | 0.86 (21.8) |
0.90 (22.9) |
N/A | N/A | 1.60 lbs (0.73 Kg) |
3.60 (1.63) |
|
||||
| |
|||||||||||||
 |
U20-SIT/FIT/SCREEN |
G 1/8″ Male M5 Female | 0.86 (21.8) |
0.90 (22.9) |
N/A | N/A | 1.60 lbs (0.73 Kg) |
3.60 (1.63) |
|
||||
| |
|||||||||||||
| Fittings for U20 Cups | Notes | Suspensions | |||||||||||
 |
A-3150196 |
|
|
||||||||||
|
|
||||||||||||
 |
STRENGTHENING A-0101084 |
The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
|
||||||||||
| |
|||||||||||||
 |
A-3150141 |
|
|
||||||||||
|
|
||||||||||||
 |
A-3150140 |
The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom. |
|
||||||||||
| |
|||||||||||||
| U30 Cups | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
|
 |
U30-NEO |
N/A | 1.26 (31.9) |
1.29 (32.7) |
0.40 (10.1) |
0.21 (5.3) |
2.98 lbs (1.35 Kg) |
6.70 (3.04) |
|
|||
| |
|||||||||||||
|
 |
U30-SIT |
N/A | 1.26 (31.9) |
1.29 (32.7) |
0.40 (10.1) |
0.21 (5.3) |
2.98 lbs (1.35 Kg) |
6.70 (3.04) |
|
|||
| |
|||||||||||||
| U30 Cups with 20-30 Fitting | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U30-NEO/1PC FITTING |
G 1/8″ Male M5 Female | 1.26 (31.9) |
1.29 (32.7) |
N/A | N/A | 2.98 lbs (1.35 Kg) |
6.70 (3.04) |
|
||||
| |
|||||||||||||
 |
U30-SIT/1PC FITTING |
G 1/8″ Male M5 Female | 1.26 (31.9) |
1.29 (32.7) |
N/A | N/A | 2.98 lbs (1.35 Kg) |
6.70 (3.04) |
|
||||
| |
|||||||||||||
| U30 Cups with 20-30 Connection Plate | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U30-NEO/FIT/SCREEN |
G 1/8″ Male M5 Female | 1.26 (31.9) |
1.29 (32.7) |
N/A | N/A | 2.98 lbs (1.35 Kg) |
6.70 (3.04) |
|
||||
| |
|||||||||||||
 |
U30-SIT/FIT/SCREEN |
G 1/8″ Male M5 Female | 1.26 (31.9) |
1.29 (32.7) |
N/A | N/A | 2.98 lbs (1.35 Kg) |
6.70 (3.04) |
|
||||
| |
|||||||||||||
| Fittings for U30 Cups | Notes | Suspensions | |||||||||||
| |
A-3150196 |
|
|
||||||||||
|
|
||||||||||||
| |
STRENGTHENING A-0101084 |
The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
|
||||||||||
| |
|||||||||||||
| |
A-3150141 |
|
|
||||||||||
|
|
||||||||||||
| |
A-3150140 |
The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom. |
|
||||||||||
| |
|||||||||||||
| U40 Cups | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
|
 |
U40-NEO |
N/A | 1.65 (41.9) |
1.73 (43.9) |
0.53 (13.5) |
0.32 (8.1) |
7.2 lbs (3.3 Kg) |
11.00 (4.99) |
 |
|||
|
 |
U40-SIT |
N/A | 1.65 (41.9) |
1.73 (43.9) |
0.53 (13.5) |
0.32 (8.1) |
7.2 lbs (3.3 Kg) |
11.00 (4.99) |
|
|||
| U40 Cups with 40/30-2/BL30 Fitting | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U40-NEO/1PC FITTING |
G 1/8″ Female | 1.65 (41.9) |
1.73 (43.9) |
N/A | N/A | 4.89 lbs (2.22 Kg) |
11.00 (4.99) |
|
||||
 |
U40-SIT/1PC FITTING |
G 1/8″ Female | 1.65 (41.9) |
1.73 (43.9) |
N/A | N/A | 4.89 lbs (2.22 Kg) |
11.00 (4.99) |
|
||||
| U40 Cups with 40 Connection Plate | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U40-NEO/FIT/SCREEN |
G 1/8″ Female | 1.65 (41.9) |
1.73 (43.9) |
N/A | N/A | 4.89 lbs (2.22 Kg) |
11.00 (4.99) |
|
||||
 |
U40-SIT/FIT/SCREEN |
G 1/8″ Female | 1.65 (41.9) |
1.73 (43.9) |
N/A | N/A | 4.89 lbs (2.22 Kg) |
11.00 (4.99) |
|
||||
| Fittings for U40 Cups | Notes | Suspensions | |||||||||||
 |
A-3250001 |
The 40/30-2/BL30 FITTING uses a Strengthening Ring 40. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. |
|
||||||||||
 |
STRENGTHENING A-0101085 |
The Strengthening Ring 40 is used with the above 40/30-2/BL30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
|
||||||||||
 |
A-3150143 |
The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. |
|
||||||||||
 |
A-3150142 |
The 40 Locking Spacer is used with the above 40 Connection Plate. It presses in from the bottom. |
|
||||||||||
| U50 Cups | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
|
 |
U50-NEO |
N/A | 2.03 (51.6) |
2.12 (53.8) |
0.70 (17.7) |
0.40 (10.1) |
8.89 lbs (4.0 Kg) |
20.00 (9.07) |
|
|||
|
 |
U50-SIT |
N/A | 2.03 (51.6) |
2.12 (53.8) |
0.70 (17.7) |
0.40 (10.1) |
8.89 lbs (4.0 Kg) |
20.00 (9.07) |
|
|||
| U50 Cups with 50/50-2 Fitting | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U50-NEO/1PC FITTING |
G 1/8″ Female | 2.03 (51.6) |
2.12 (53.8) |
N/A | N/A | 8.89 lbs (4.0 Kg) |
20.00 (9.07) |
|
||||
 |
U50-SIT/1PC FITTING |
G 1/8″ Female | 2.03 (51.6) |
2.12 (53.8) |
N/A | N/A | 8.89 lbs (4.0 Kg) |
20.00 (9.07) |
|
||||
| U50 Cups with 50 Connection Plate | Connection Thread Size | Static Diameter | Max. Diameter | Static Height | Comp. Height | Load Cap. | Pull-Off Cap. | Suspensions | |||||
 |
U50-NEO/FIT/SCREEN |
G 1/8″ Female | 2.03 (51.6) |
2.12 (53.8) |
N/A | N/A | 8.89 lbs (4.0 Kg) |
20.00 (9.07) |
|
||||
 |
U50-SIT/FIT/SCREEN |
G 1/8″ Female | 2.03 (51.6) |
2.12 (53.8) |
N/A | N/A | 8.89 lbs (4.0 Kg) |
20.00 (9.07) |
|
||||
| Fittings for U50 Cups | Notes | Suspensions | |||||||||||
 |
50/50-2 FITTING A-05AG 05AG (Replaces A-3250002) 32.50.002 |
The 50/50-2 Fitting is utilized with a Strengthening Ring 50. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. |
|
||||||||||
 |
The A-05AG-18m-G Fitting is utilized with a Strengthening Ring 50. It allows you to screw into any of the SLSA-2 Suspensions using HS18G-18F-G fitting. |
|
|||||||||||
 |
STRENGTHENING A-0101086 |
The Strengthening Ring 50 is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
|
||||||||||
 |
A-3150145 |
The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. |
|
||||||||||
 |
A-3150144 |
The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom. |
|
||||||||||
 |
 |
* All cups shown above are identical in size and shape to P-Style’s cups. The dimensional drawings represent the cup dimensions without a load as given by P-Style. The ‘compressed’ column specifications are important in making sure that everything fits, and represent the actual size of the cup after full compression (being flattened out) on a level load. (This difference is negligible in the F series.) The bigger the cup the greater the enlargement of the diameter. A lower vacuum level will lessen this compression (or flattening out); however, make sure to leave enough room for the static height of the cup in your design.
 |
The “G” thread is also known as BSPP, commonly used world-wide for Vacuum Applications. |
 |
 |
 |
