Vacuum Cups, Suction Cups, and Valve Cup Assemblies
P-Series – Flat Vacuum Cups and Suction Cups with Valves

Vacuum Cup Materials

  • The standard materials are Nitrile and Silicone (as noted below each part number).
  • For more information on the materials, click here.

Product
Photo

(Click to Enlarge)

ANVER and P-Series
Descriptions
and Part Numbers

Connection
Thread Size
Static 
Diameter*
in.
(mm)
Static
Height*
in.
(mm)
Load Capacity
at 24 in. Hg
(609.6mm Hg)
[2:1 Safety Factor]

lb
(kg)
Pull-Off Capacity
at 27 in. Hg
(685.8mm Hg)
[1:1 Safety Factor]

lb
(kg)
Level
Compensator
Suspensions
(Click Image for
More Info)
F30 Cups with Valves
F30-NEO/VALVE

F30-NEO/VALVE
(Nitrile)
A-3150049
31.50.049
F30-2.10.02UV

G 1/8″ Male
M5 Female
1.25
(31.6)
0.40
(10.0)
3.11
(1.41)
7.00
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F30-SIT/VALVE

F30-SIT/VALVE
(Translucent Silicone)
A-3150049S
31.50.049S
F30-2.20.02UV
RoHS Compliant

G 1/8″ Male
M5 Female
1.25
(31.6)
0.40
(10.0)
3.11
(1.41)
7.00
(3.18)
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
Fitting & Valve for F30 Cups Notes Suspensions
A-3150141

20-30 CONNECTION PLATE

A-3150141
31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm Adapter.

HSHN5 Double Male 5 mm Adapter

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ Adapter.

HS18G-18FG Double Female G 1/8" Adapter
ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
A-3150055

 30 BUTTON VALVE

A-3150055
31.50.055

The 30 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
F40 Cups with Valves Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
F40-NEO/VALVE

F40-NEO/VALVE
(Nitrile)
A-3150050P
31.50.050P
F40-2.30.04UV
RoHS Compliant

G 1/8″ Female 1.66
(42.1)
0.80
(21.0)
4.89
(2.22)
11.00
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
F40-SIT/VALVE

F40-SIT/VALVE
(Translucent Silicone)
A-3150050S
31.50.050S
F40-20.20.04UV
RoHS Compliant

G 1/8″ Female 1.66
(42.1)
0.80
(21.0)
4.89
(2.22)
11.00
(4.99)
ANVER SLSA-2 Level Compensator Suspensions
Fitting & Valve for F40 Cups Notes Suspensions
A-3150143

 40 CONNECTION PLATE

A-3150143
31.50.143

The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions that have a male G 1/8″ Thread.

ANVER SLSA-2 Level Compensator Suspensions
A-3150056

 40 BUTTON VALVE

A-3150056
31.50.056

The 40 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

ANVER SLSA-2 Level Compensator Suspensions
F50 Cups with Valves Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
A-3150051P

F50-NEO/VALVE
(Nitrile)
A-3150051P
31.50.051P
F50-2.30.05UV
RoHS Compliant

G 1/8″ Female 2.10
(52.8)
1.10
(27.0)
9.33
(4.23)
21.00
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
A-3150051S

F50-SIT/VALVE
(Translucent Silicone)
A-3150051S
31.50.051S
F50-2.10.05UV
RoHS Compliant

G 1/8″ Female 2.10
(52.8)
1.10
(27.0)
9.33
(4.23)
21.00
(9.53)
ANVER SLSA-2 Level Compensator Suspensions
Fitting & Valve for F50 Cups Notes Suspensions
A-3150145

 50 CONNECTION PLATE

A-3150145
31.50.145

The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions that have a male G 1/8″ Thread.

ANVER SLSA-2 Level Compensator Suspensions
A-3150057

 50 BUTTON VALVE

A-3150057
31.50.057

The 50 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

ANVER SLSA-2 Level Compensator Suspensions
F75 Cups with Valves Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
A-3150078P

F75-NEO/VALVE
(Nitrile)
A-3150078P
31.50.078P
F75.30.07UV
RoHS Compliant

G 1/8″ Female 3.02
(76.5)
0.60
(14.0)
26.67
(12.10)
60.00
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
A-3150078P

F75-SIT/VALVE
(Translucent Silicone)
A-3150078S
31.50.078S
F75.20.07UV
RoHS Compliant

G 1/8″ Female 3.02
(76.5)
0.60
(14.0)
26.67
(12.10)
60.00
(27.22)
ANVER SLSA-2 Level Compensator Suspensions
Fitting & Valve for F75 Cups Notes Suspensions
A-3250006

 75 FITTING 1/8″

A-3250006
32.50.006
07UA

The 75 Fitting 1/8″ with 1/8″ female center port connection with optional M5 (10/32) female port often used as a blow-off port.

ANVER SLSA-2 Level Compensator Suspensions
A-3350033

 75 BUTTON VALVE

A-3350033
33.50.033

The 75 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

ANVER SLSA-2 Level Compensator Suspensions
F110 Cups with Valves Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions
A-3150079P

F110-NEO/VALVE
(Nitrile)
A-3150079P
31.50.079P
F110.30.11UV
RoHS Compliant

G 1/2″ Female 4.30
(112.5)
0.70
(19.0)
56.00
(25.40)
126.00
(57.15)
ANVER SLSA-3 Level Compensator Suspensions
A-3150079S

F110-SIT/VALVE
(Translucent Silicone)
A-3150079S
31.50.079S
F110.20.11UV
RoHS Compliant

G 1/2″ Female 4.30
(112.5)
0.70
(19.0)
56.00
(25.40)
126.00
(57.15)
ANVER SLSA-3 Level Compensator Suspensions
Fitting & Valve for F150 Cups Notes Suspensions
A-3250007

110 FITTING 1/2″

A-3250007
32.50.007
11UA

The 110 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port.

ANVER SLSA-3 Level Compensator Suspensions
A-3350034

 110/150 BUTTON VALVE

A-3350034
33.50.034

The 110/150 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

ANVER SLSA-3 Level Compensator Suspensions
F150 Cups with Valves Connection Thread Size Static Diameter Static Height Load Capacity Pull-Off Capacity Suspensions

A-3150080P

F150-NEO/VALVE
(Nitrile)
A-3150080P
31.50.080P
F150.30.15UV
RoHS Compliant

G 1/2″ Female 6.13
(155.6)
1.00
(25.0)
106.67
(48.38)
240.00
(108.86)
ANVER SLSA-3 Level Compensator Suspensions

A-3150080S

F150-SIT/VALVE
(Translucent Silicone)
A-3150080S
31.50.080S
F150.20.15UV
RoHS Compliant

G 1/2″ Female 6.13
(155.6)
1.00
(25.0)
106.67
(48.38)
240.00
(108.86)
ANVER SLSA-3 Level Compensator Suspensions
Fitting & Valve for F150 Cups Notes Suspensions
A-3250008

 150 FITTING 1/2″

A-3250008
32.50.008
11UA

The 150 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port.

ANVER SLSA-3 Level Compensator Suspensions
A-3350034

110/150 BUTTON VALVE

A-3350034
33.50.034

The 110/150 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

ANVER SLSA-3 Level Compensator Suspensions

 

ANVER Valve Cup Assemblies

Many new Valve Cup Assembly options are now available by combining select ANVER cups and ANVER fittings to form ‘ANVER Valve Cup Assemblies.’ Using the chart below, click on any photo to see an enlarged image of the completed ANVER Valve Cup Assembly. Click on a cup photo under ‘Made from This Cup…’ to get technical and ordering information for the appropriate cup; click on a fitting photo under ‘…and this Fitting‘ to get technical and ordering information for the appropriate fitting.

ANVER
Valve Cup Assembly
Made from
this Cup…
(Click to see Cup Page)
+ …and this Fitting
(Click to see Fitting Page)
Photo
(Click to Enlarge)
Description
Made from
Cup
F77-NBR and
Fitting
HS18-SV-SS
F77-NBR +
Made from
Cup
F77-SIT and
Fitting
HS18-SV-SS
F77-SIT +
Made from
Cup
F85-NBR and
Fitting
HS18-SV-SS
+
Made from
Cup
F85-SIT and
Fitting
HS18-SV-SS
+
Made from
Cup
F95-NBR and
Fitting
HS18-SV-LL
F95-NBR +
Made from
Cup
F95-SIT and
Fitting
HS18-SV-LL
F95-SIT +
ANVER
Valve Cup Assembly
Made from
this Cup…
(Click to see Cup Page)
+ …and this Fitting
(Click to see Fitting Page)
Photo
(Click to Enlarge)
Description
Made from
Cup
F77-NBR and
Fitting
HS18-G-SV-SS
F77-NBR +
Made from
Cup
F77-SIT and
Fitting
HS18-G-SV-SS
F77-SIT +
Made from
Cup
F85-NBR and
Fitting
HS18-G-SV-SS
+
Made from
Cup
F85-SIT and
Fitting
HS18-G-SV-SS
+
Made from
Cup
F95-NBR and
Fitting
HS18-G-SV-LL
F95-NBR +
Made from
Cup
F95-SIT and
Fitting
HS18-G-SV-LL
F95-SIT +

 

The “G” thread is also known as BSPP, commonly used world-wide for vacuum applications.

Click Here to See More Details of Different Suction Cup and Vacuum Cup Materials  

 

Speed Attach and Release, Save Vacuum with ANVER Flat Suction Cups with Probes



ANVER Vacuum Suction Cups Handle CD's and All Optical Media

Note: 

  • If you click on the small thumbnail photo it will enlarge for more detail and specifications.
  • All cups shown above are identical to P-Style size and shape. The static column is the cup dimensions without a load as given by P-Style.
  • The compressed column specifications are the important ones to make sure everything fits. It is the actual size of the cup after full compression (being flattened out) on a level load, which is slightly different from the F series. The bigger the cup, the greater the enlarging of the diameter. A lower vacuum level will lessen this compression or flattening out; however, make sure to leave enough room for the cup under vacuum in your design.

Go to Generic Suction Cup Main Page