ANVER Vacuum Cups and Suction Cups
Vacuum Cup Fittings – Group 1
Part Number: BM5 Captured O-Ring Barbed Fitting
Vacuum Fitting |
Connection |
Thru Hole Diameter |
Hex Size |
L |
H |
||
|
BM5 | M5 (5 mm) male |
0.09 in. (2.3 mm) |
0.31 in. |
0.20 in. (5 mm) |
0.35 in. (9 mm) |
Material: All-metal, electro-less nickel-plated brass fitting
Available Suspension Assemblies with Fittings
Captured O-Ring Barbed Fitting
Features:
-
Reliability of a metal-to-metal mechanical fit between cup and level compensator
or other mounting element
-
Captured O-Ring for superior vacuum seal
-
Precision machined barb design presses right into vacuum cup and seals tight
-
Quality Electroless Nickel Plated Brass for durability
The design of the Captured O-ring Barbed Fitting combines the reliable mechanical fit of a metal-to-metal connection with the unmatched static sealing qualities of an O-ring. Proper installation of the fitting allows the skirt around the O-ring to mechanically seat on the rim of the female thread, holding the fitting tight. A clean looking connection is achieved by concealing the high quality Buna-N O-ring from view inside the skirt of the fitting. The Buna-N O-ring is thus compressed, not pinched, within the fitting skirt ensuring a leak-proof fit even when mated with a less than perfect sealing surface. The mechanical fit keeps the fittings tight and retains its position even under constant vibration or movement of our SLSA Level Compensators. Our captured O-ring design eases installation and eliminates the need for replacement gaskets or washers as the seal is already in position. The seal is kept tight minimizing unnecessary vacuum loss.
Available Vacuum Suction Cups that use Fitting No. BM5 The BM5 Group 1 Fitting can be used with many different Vacuum Suction Cups (too many to list here). |
||
Click either of these pages of cups
|