Vacuum Cups and Suction Cups
P-Series – B 1.5 Bellows Vacuum Cups and Suction Cups
Vacuum Cup Materials
Ideal for use where level compensation is desired on an irregularly shaped object, where a vertical offset motion is involved, for use on curved surfaces, or for separating thin work pieces. Available in sizes from 0.40 to 6.10 inches (11 to 156 mm) NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications. |
Product |
ANVER |
Connection Thread Size |
Static Diameter* in. (mm) |
Com- pressed Diameter* in. (mm) |
Static Height* in. (mm) |
Com- pressed Height* in. (mm) |
Load Capacity at 24 in. Hg (609.6mm Hg) [2:1 Safety Factor] |
Pull-Off Capacity at 27 in. Hg (685.8mm Hg) [1:1 Safety Factor] lb (kg) |
Level |
||||
A-B5 Cups | |||||||||||||
Photo to Come | N/A | 0.24 (6.2) |
0.26 (6.5) |
0.36 (9.2) |
0.27 (6.9) |
80 grams |
0.4 (0.18) |
||||||
A-B5.20 |
N/A | 0.24 (6.2) |
0.26 (6.5) |
0.36 (9.2) |
0.27 (6.9) |
80 grams |
0.4 (0.18) |
||||||
A-B5 Cups with Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
Photo to Come |
A-B5.10.01AB |
M5 male | 0.24 (6.2) |
0.26 (6.5) |
0.71 (18.1) |
0.62 (15.8) |
80 grams |
0.4 (0.18) |
|||||
A-B5.20.01AB |
M5 male | 0.24 (6.2) |
0.26 (6.5) |
0.71 (18.1) |
0.62 (15.8) |
80 grams |
0.4 (0.18) |
||||||
A-B8 Cups | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
Photo to Come | N/A | 0.33 (8.4) |
0.38 (9.6) |
0.47 (11.9) |
0.30 (7.6) |
169 grams |
0.84 (0.38) |
||||||
A-B8.20 |
N/A | 0.33 (8.4) |
0.38 (9.6) |
0.47 (11.9) |
0.30 (7.6) |
169 grams |
0.84 (0.38) |
||||||
A-B8 Cups with Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
Photo to Come |
A-B8.10.01AB |
M5 male | 0.33 (8.4) |
0.38 (9.6) |
0.76 (19.4) |
0.59 (15.1) |
169 grams |
0.84 (0.38) |
|||||
A-B8.20.01AB |
M5 male | 0.33 (8.4) |
0.38 (9.6) |
0.76 (19.4) |
0.59 (15.1) |
169 grams |
0.84 (0.38) |
||||||
B10 Cups | |||||||||||||
N/A | 0.43 (11.0) |
0.43 (11.0) |
0.67 (17.0) |
0.52 (13.2) |
220 grams |
1.1 (0.50) |
|||||||
B10-SIT |
N/A | 0.43 (11.0) |
0.43 (11.0) |
0.67 (17.0) |
0.52 (13.2) |
220 grams |
1.1 (0.50) |
||||||
B10 Cups with Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B10-NEO/FIT |
M5 male | 0.43 (11.0) |
0.43 (11.0) |
1.00 (25.0) |
0.92 (23.4) |
220 grams |
1.1 (0.50) |
||||||
B10-SIT/FIT |
M5 male | 0.43 (11.0) |
0.43 (11.0) |
1.00 (25.0) |
0.92 (23.4) |
220 grams |
1.1 (0.50) |
||||||
B10-2 Cups | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B10-2-NEO |
N/A | 0.43 (11.0) |
0.43 (11.0) |
0.67 (17.0) |
0.52 (13.2) |
220 grams |
1.1 (0.50) |
||||||
B10-2-SIT |
N/A | 0.43 (11.0) |
0.43 (11.0) |
0.67 (17.0) |
0.52 (13.2) |
220 grams |
1.1 (0.50) |
||||||
B10-2 Cups with Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B10-2-NEO/FIT |
M5 male | 0.43 (11.0) |
0.43 (11.0) |
1.00 (25.0) |
0.92 (23.4) |
220 grams |
1.1 (0.50) |
||||||
B10-2-SIT/FIT |
M5 male | 0.43 (11.0) |
0.43 (11.0) |
1.00 (25.0) |
0.92 (23.4) |
220 grams |
1.1 (0.50) |
||||||
Fittings for B10 Cups | Notes | Other Fittings | Suspensions | ||||||||||
BM5 FITTING M5 MALE |
The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions. |
||||||||||||
BM10-32 |
The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Comes with captured O-ring for a vacuum tight seal. Popular alternate fitting for the North American market. |
||||||||||||
B15 Cups | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
N/A | 0.60 (16.0) |
0.65 (16.5) |
0.80 (20.0) |
0.59 (14.8) |
0.89 lbs (0.40 Kg) |
2.0 (0.91) |
|||||||
B15-SIT |
N/A | 0.60 (16.0) |
0.65 (16.5) |
0.80 (20.0) |
0.59 (14.8) |
0.89 lbs (0.40 Kg) |
2.0 (0.91) |
||||||
B15 Cups with Fittings | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B15-NEO/FIT |
M5 male | 0.60 (16.0) |
0.65 (16.5) |
1.00 (28.0) |
0.79 (20.1) |
0.89 lbs (0.40 Kg) |
2.0 (0.91) |
||||||
B15-SIT/FIT |
M5 male | 0.60 (16.0) |
0.65 (16.5) |
1.00 (28.0) |
0.79 (20.1) |
0.89 lbs (0.40 Kg) |
2.0 (0.91) |
||||||
Fittings for B15 Cups | Notes | Other Fittings | Suspensions | ||||||||||
BM5 FITTING M5 MALE Replaces 10-15 FITTING A-3107030 31.07.030 01AC |
The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions. |
||||||||||||
BM10-32 |
The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Comes with captured O-ring. Popular alternate fitting for North America. |
||||||||||||
B20 Cups | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
N/A | 0.90 (22) |
0.90 (22) |
0.80 (19.0) |
0.49 (21.5) |
1.38 lbs (0.63 Kg) |
3.1 (1.41) |
|||||||
B20-SIT |
N/A | 0.90 (22) |
0.90 (22) |
0.80 (19.0) |
0.49 (12.5) |
1.38 lbs (0.63 Kg) |
3.1 (1.41) |
||||||
A-B20-P60 |
N/A | 0.90 (22) |
0.90 (22) |
0.80 (19.0) |
0.49 (12.5) |
1.38 lbs (0.63 Kg) |
3.1 (1.41) |
||||||
B20 Cups with 20-30 Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B20-NEO/1PC FIT |
G 1/8″ male and M5 female | 0.90 (22.0) |
0.85 (21.5) |
1.10 (29.0) |
0.79 (20.1) |
1.38 lbs (0.63 Kg) |
3.1 (1.41) |
||||||
B20-SIT/1PC FIT |
G 1/8″ male and M5 female | 0.90 (22.0) |
0.85 (21.5) |
1.10 (29.0) |
0.79 (20.1) |
1.38 lbs (0.63 Kg) |
3.1 (1.41) |
||||||
B20 Cups with 20-30 Connection Plate | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B20-NEO/FIT/SCREEN |
G 1/8″ male and M5 female | 0.90 (22.0) |
0.85 (21.5) |
1.00 (26.0) |
0.69 (17.5) |
1.38 lbs (0.63 Kg) |
3.1 (1.41) |
||||||
B20-SIT/FIT/SCREEN |
G 1/8″ male and M5 female | 0.90 (22.0) |
0.85 (21.5) |
1.00 (26.0) |
0.69 (17.5) |
1.38 lbs (0.63 Kg) |
3.1 (1.41) |
||||||
Fittings for B20 Cups | Notes | Suspensions | |||||||||||
A-3150196 |
|
||||||||||||
|
|||||||||||||
STRENGTHENING A-0101084 |
The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||||||||||
A-3150141 |
|
||||||||||||
|
|||||||||||||
A-3150140 |
The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom. |
||||||||||||
B30 Cups | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
N/A | 1.30 (33) |
1.34 (34.0) |
1.0 (25.4) |
0.55 (14.0) |
2.67 lbs (1.2 Kg) |
6.0 (2.72) |
|||||||
B30-SIT |
N/A | 1.30 (33) |
1.34 (34.0) |
1.0 (25.4) |
0.55 (14.0) |
2.67 lbs (1.2 Kg) |
6.0 (2.72) |
||||||
A-B30-P60 |
N/A | 1.30 (33) |
1.34 (34.0) |
1.0 (25.4) |
0.55 (14.0) |
2.67 lbs (1.2 Kg) |
6.0 (2.72) |
||||||
B30 Cups with 20-30 Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B30-NEO/1PC FIT |
G 1/8″ male and M5 female | 1.30 (33) |
1.34 (34.0) |
1.30 (33) |
0.9 (22.9) |
2.67 lbs (1.2 Kg) |
6.0 (2.72) |
||||||
B30-SIT/1PC FIT |
G 1/8″ male and M5 female | 1.30 (33) |
1.34 (34.0) |
1.30 (33) |
0.9 (22.9) |
2.67 lbs (1.2 Kg) |
6.0 (2.72) |
||||||
B30 Cups with 20-30 Connection Plate | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B30-NEO/FIT/SCREEN |
G 1/8″ male and M5 female | 1.30 (33) |
1.34 (34.0) |
1.30 (33) |
1.05 (26.7) |
4.0 lbs (1.8 Kg) |
4.70 (2.13) |
||||||
B30-SIT/FIT/SCREEN |
G 1/8″ male and M5 female | 1.30 (33) |
1.34 (34.0) |
1.30 (33) |
1.05 (26.7) |
4.0 lbs (1.8 Kg) |
4.70 (2.13) |
||||||
Fittings for B30 Cups | Notes | Suspensions | |||||||||||
A-3150196 |
|
||||||||||||
|
|||||||||||||
STRENGTHENING A-0101084 |
The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||||||||||
A-3150141 |
|
||||||||||||
|
|||||||||||||
A-3150140 |
The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom. |
||||||||||||
B40 Cups | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
N/A | 1.7 (43.2) |
1.8 (46) |
1.10 (28.0) |
0.55 (14) |
4.88 lbs (2.2 Kg) |
11.0 (5.0) |
|||||||
B40-SIT |
N/A | 1.7 (43.2) |
1.8 (46) |
1.10 (28.0) |
0.55 (14) |
4.88 lbs (2.2 Kg) |
11.0 (5.0) |
||||||
A-B40-P60 |
N/A | 1.7 (43.2) |
1.8 (46) |
1.10 (28.0) |
0.55 (14) |
4.88 lbs (2.2 Kg) |
11.0 (5.0) |
||||||
B40 Cups with 40/30-2/BL30 Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B40-NEO/1PC FIT |
G 1/8″ female | 1.7 (43.2) |
1.8 (46) |
1.40 (35.6) |
1.00 (25.4) |
4.88 lbs (2.2 Kg) |
11.0 (5.0) |
||||||
B40-SIT/1PC FIT |
G 1/8″ female | 1.7 (43.2) |
1.8 (46) |
1.40 (35.6) |
1.00 (25.4) |
4.88 lbs (2.2 Kg) |
11.0 (5.0) |
||||||
B40 Cups with 40 Connection Plate | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B40-NEO/FIT/SCREEN |
G 1/8″ female | 1.7 (43.2) |
1.8 (46) |
1.40 (35.6) |
1.00 (25.4) |
4.88 lbs (2.2 Kg) |
11.0 (5.0) |
||||||
B40-SIT/FIT/SCREEN |
G 1/8″ female | 1.7 (43.2) |
1.8 (46) |
1.40 (35.6) |
1.00 (25.4) |
4.88 lbs (2.2 Kg) |
11.0 (5.0) |
||||||
Fittings for B40 Cups | Notes | Suspensions | |||||||||||
A-3250001 |
The 40/30-2/BL30 FITTING uses a Strengthening Ring 40. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. (G 1/8″ female) |
||||||||||||
STRENGTHENING A-0101085 |
The Strengthening Ring 40 is used with the above 40/30-2/BL30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||||||||||
A-3150143 |
The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. (G 1/8″ female) |
||||||||||||
A-3150142 |
The 40 Locking Spacer is used with the above 40 Connection Plate. It presses in from the bottom. |
||||||||||||
B50 Cups | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B50-NEO |
N/A | 2.00 (52.0) |
2.1 (53.3) |
1.40 (35.5) |
0.88 (22.4) |
8.0 lbs (3.6 Kg) |
18.0 (8.16) |
||||||
B50-SIT |
N/A | 2.00 (52.0) |
2.1 (53.3) |
1.40 (35.5) |
0.88 (22.4) |
8.0 lbs (3.6 Kg) |
18.0 (8.16) |
||||||
A-B50-P60 |
N/A | 2.00 (52.0) |
2.1 (53.3) |
1.40 (35.5) |
0.88 (22.4) |
8.0 lbs (3.6 Kg) |
18.0 (8.16) |
||||||
B50 Cups with 50 Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B50-NEO/1PC FIT |
G 1/8″ female | 2.00 (52.0) |
2.12 (53.8) |
1.70 (43.2) |
1.23 (31.2) |
8.0 lbs (3.6 Kg) |
18.0 (8.16) |
||||||
B50-SIT/1PC FIT |
G 1/8″ female | 2.00 (52.0) |
2.12 (53.8) |
1.70 (43.2) |
1.23 (31.2) |
8.0 lbs (3.6 Kg) |
18.0 (8.16) |
||||||
B50 Cups with 50 Connection Plate | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B50-NEO/FIT/SCREEN |
G 1/8″ female | 2.00 (52.0) |
2.12 (53.8) |
1.70 (43.2) |
1.23 (31.2) |
8.0 lbs (3.6 Kg) |
18.0 (8.16) |
||||||
B50-SIT/FIT/SCREEN |
G 1/8″ female | 2.00 (52.0) |
2.12 (53.8) |
1.70 (43.2) |
1.23 (31.2) |
8.0 lbs (3.6 Kg) |
18.0 (8.16) |
||||||
Fittings for B50 Cups | Notes | Suspensions | |||||||||||
50/50-2 FITTING |
The 50/50-2 Fitting is utilized with a Strengthening Ring 50. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. (G 1/8″ female) |
||||||||||||
The A-05AG-18m-G Fitting is utilized with a Strengthening Ring 50. It allows you to screw into any of the SLSA-2 Suspensions using HS18G-18F-G fitting. |
|||||||||||||
STRENGTHENING A-0101086 |
The Strengthening Ring 50 is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||||||||||
A-3150145 |
The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. (G 1/8″ female) |
||||||||||||
A-3150144 |
The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom. |
||||||||||||
B75 Cups | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B75-NEO |
N/A | 3.10 (78.0) |
3.21 (81.5) |
1.50 (38) |
1.2 (30.5) |
22 lbs (10 Kg) |
50 (22.68) |
||||||
B75-SIT |
N/A | 3.10 (78.0) |
3.21 (81.5) |
1.50 (38) |
1.2 (30.5) |
22 lbs (10 Kg) |
50 (22.68) |
||||||
B75 Cups with 75 Connection Plate | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B75-NEO/CON PLATE |
N/A | 3.10 (78.0) |
3.21 (81.5) |
1.50 (37.0) |
1.2 (30.5) |
22 lbs (10 Kg) |
50.00 (22.68) |
||||||
B75-SIT/CON PLATE |
N/A | 3.10 (78.0) |
3.21 (81.5) |
1.50 (37.0) |
1.2 (30.5) |
22 lbs (10 Kg) |
50.00 (22.68) |
||||||
B75 Cups with 75 Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B75-NEO/FIT/SCREEN |
G 1/8″ female | 3.10 (78.0) |
3.21 (81.5) |
2.00 (50.8) |
1.75 (44.5) |
22 lbs (10 Kg) |
50.00 (22.68) |
||||||
B75-SIT/FIT/SCREEN |
G 1/8″ female | 3.10 (78.0) |
3.21 (81.5) |
2.00 (50.8) |
1.75 (44.5) |
22 lbs (10 Kg) |
50.00 (22.68) |
||||||
Fittings for B75 Cups | Notes | Suspensions | |||||||||||
A-3150043 |
The 75 Connection Plate 1/8 is to be imbedded in the 75 Series suction cup’s rubber portion allowing the 75 Fitting 1/8″ to be held in place. |
||||||||||||
A-3250006 |
The 75 Fitting 1/8″ with 1/8″ female center port connection with optional M5 (10/32) female port often used as a blow-off port. (G 1/8″ female) |
||||||||||||
B110 Cups | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B110-NEO |
N/A | 4.63 (118) |
4.53 (115) |
2.14 (54.3) |
0.76 (19.3) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110-SIT |
N/A | 4.63 (118) |
4.53 (115) |
2.14 (54.3) |
0.76 (19.3) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110-P50 |
N/A | 4.63 (118) |
4.53 (115) |
2.14 (54.3) |
0.76 (19.3) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110-P60 |
N/A | 4.63 (118) |
4.53 (115) |
2.14 (54.3) |
0.76 (19.3) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110 Cups with 110 Connection Plate | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B110-NEO/CON PLATE |
N/A | 4.63 (118) |
4.53 (115) |
2.14 (54.3) |
0.76 (19.3) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110-SIT/CON PLATE |
N/A | 4.63 (118) |
4.53 (115) |
2.14 (54.3) |
0.76 (19.3) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110-SIT/CON PLATE |
N/A | 4.63 (118) |
4.53 (115) |
2.14 (54.3) |
0.76 (19.3) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110-P60/CON PLATE |
N/A | 4.63 (118) |
4.53 (115) |
2.14 (54.3) |
0.76 (19.3) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110 Cups with 110 Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B110-NEO/FIT |
G 1/2″ female | 4.63 (118) |
4.53 (115) |
2.4 (60) |
1.5 (38) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110-SIT/FIT |
G 1/2″ female | 4.63 (118) |
4.53 (115) |
2.4 (60) |
1.5 (38) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110-P50/FIT |
G 1/2″ female | 4.63 (118) |
4.53 (115) |
2.4 (60) |
1.5 (38) |
45 lbs (20 Kg) |
103 (46.72) |
||||||
B110-P60/FIT |
G 1/2″ female | 4.63 (118) |
4.53 (115) |
2.4 (60) |
1.5 (38) |
45 lbs (20 Kg) |
103.00 (46.72) |
||||||
Fittings for B110 Cups | Notes | Suspensions | |||||||||||
A-3250007 |
The 110 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port. (G 1/8″ female) |
||||||||||||
A-3150044 |
The 110 Connection Plate is to be imbedded in the 110 Series suction cup’s rubber portion allowing the 110 Fitting 1/2″ to be held in place. |
||||||||||||
B150 Cups | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B150-NEO |
N/A | 6.10 (155) |
6.50 (165.1) |
2.80 (71.1) |
1.04 (26.4) |
88 lbs (40 Kg) |
198 (89.81) |
||||||
B150-SIT |
N/A | 6.10 (155) |
6.50 (165.1) |
2.80 (71.1) |
1.04 (26.4) |
88 lbs (39.92 Kg) |
198 (89.81) |
||||||
B150-P50 |
N/A | 6.10 (155) |
6.50 (165.1) |
2.80 (71.1) |
1.04 (26.4) |
88 lbs (40 Kg) |
198 (89.81) |
||||||
B150-P60 |
N/A | 6.10 (155) |
6.50 (165.1) |
2.80 (71.1) |
1.04 (26.4) |
88 lbs (40 Kg) |
198 (89.81) |
||||||
B150 Cups with 150 Connection Plate | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B150-NEO/CON PLATE |
N/A | 6.10 (155) |
6.50 (165.1) |
2.80 (71.1) |
1.1 (27.9) |
88 lbs (40 Kg) |
198 (89.81) |
||||||
B150-SIT/CON PLATE |
N/A | 6.10 (155) |
6.50 (165.1) |
2.80 (71.1) |
1.1 (27.9) |
88 lbs (40 Kg) |
198 (89.81) |
||||||
B150 Cups with 150 Fitting | Connection Thread Size | Static Dia. | Max. Dia. | Static Ht. | Comp. Ht. | Load Cap. | Pull-Off Cap. | Suspensions | |||||
B150-NEO/FIT |
G 1/2″ female | 6.10 (156.0) |
6.50 (165.1) |
3.3 (83.8) |
1.7 (43.2) |
88 lbs (40 Kg) |
198 (89.81) |
||||||
B150-SIT/FIT |
G 1/2″ female | 6.10 (156.0) |
6.50 (165.1) |
3.3 (83.8) |
1.7 (43.2) |
88 lbs (40 Kg) |
198 (89.81) |
||||||
Fittings for B150 Cups | Notes | Suspensions | |||||||||||
A-3150045 |
The 150 Connection Plate is to be imbedded in the 150 Series suction cup’s rubber portion allowing the 150 Fitting 1/2″ to be held in place. |
||||||||||||
A-3250008 |
The 150 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port. (G 1/8″ female) |
* All cups shown above are identical in size and shape to P-Style’s cups. The dimensional drawings represent the cup dimensions without a load as given by P-Series. The ‘compressed’ column specifications are important in making sure that everything fits, and represent the actual size of the cup after full compression (being flattened out) on a level load. (This difference is negligible in the F series.) The bigger the cup the greater the enlargement of the diameter. A lower vacuum level will lessen this compression (or flattening out); however, make sure to leave enough room for the static height of the cup in your design.
The “G” thread is also known as BSPP, commonly used world-wide for Vacuum Applications. |
|
|
|
|