Vacuum Cups and Suction Cups
P-Series – F Flat Cleated Vacuum Cups and Suction Cups with Cleats
Vacuum Cup Materials
-
The standard materials are Nitrile and Silicone (as noted below each part number).
- For more information on the materials, click here.
Ideal for use on plane surfaces, where minimum movement is required to maintain the pick-up area, and for support of pliable materials. Available in sizes from 0.65 to 6.13 inches (16.6 to 155.6mm).
NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications.
|
Product |
ANVER and |
Connection Thread Size |
Static Diameter * in. (mm) |
Static Height * in. (mm) |
Load Capacity at 24 in. Hg (609.6mm Hg) [2:1 Safety Factor] lb (kg) |
Pull-Off Capacity at 27 in. Hg (685.8mm Hg) [1:1 Safety Factor] lb (kg) |
Level |
|||||
F15 Cups | |||||||||||||
N/A | 0.62 (15.8) |
0.47 (12.0) |
1.1 lbs (0.49 Kg) |
2.47 (1.12) |
|||||||||
F15-SIT |
N/A | 0.62 (15.8) |
0.47 (12.0) |
1.1 lbs (0.49 Kg) |
2.47 (1.12) |
||||||||
F15 Cups with 10-15 Fitting | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F15-NEO/FITTING |
M5 Male | 0.62 (15.8) |
0.6 (14.0) |
1.1 lbs (0.49 Kg) |
2.47 (1.12) |
||||||||
F15-SIT/FITTING |
M5 Male | 0.62 (15.8) |
0.6 (14.0) |
1.1 lbs (0.49 Kg) |
2.47 (1.12) |
||||||||
Fitting for F15 Cups | Notes | Other Fittings | Suspensions | ||||||||||
BM5 FITTING M5 MALE Replaces 10-15 FITTING A-3107030 31.07.030 01AC |
The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions. |
||||||||||||
BM10-32 |
The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Comes with captured O-ring for a vacuum tight seal. Popular alternate fitting for the North American market. |
||||||||||||
F20 Cups | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
N/A | 0.87 (22.1) |
0.30 (7.6) |
1.87 lbs (0.8 Kg) |
4.2 (1.91) |
|||||||||
F20-SIT (Translucent Silicone) A-3150126S 31.50.126S F20.20 |
N/A | 0.87 (22.1) |
0.30 (7.6) |
1.87 lbs (0.8 Kg) |
4.2 (1.91) |
||||||||
A-F20-P60 (Thermo-elastic Polyurethane) |
N/A | 0.87 (22.1) |
0.30 (7.6) |
1.87 lbs (0.8 Kg) |
4.2 (1.91) |
||||||||
A-F20-P30 (Thermo-elastic Polyurethane)** |
N/A | 0.87 (22.1) |
0.30 (7.6) |
1.87 lbs (0.8 Kg) |
4.2 (1.91) |
||||||||
A-F20-P50 |
N/A | 0.87 (22.1) |
0.30 (7.6) |
1.87 lbs (0.8 Kg) |
4.2 (1.91) |
||||||||
F20 Cups with 20-30 Fitting | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F20-NEO/1PC FITTING |
G 1/8″ Male M5 Female |
0.87 (22.1) |
0.70 (17.8) |
1.87 lbs (0.85 Kg) |
4.2 (1.91) |
||||||||
F20-SIT/1PC FITTING |
G 1/8″ Male M5 Female |
0.87 (22.1) |
0.70 (17.8) |
1.87 lbs (0.85 Kg) |
4.2 (1.91) |
||||||||
F20 Cups with 20-30 Connection Plate | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F20-NEO/FIT/SCREEN |
G 1/8″ Male M5 Female |
0.87 (22.1) |
0.70 (17.8) |
1.87 lbs (0.85 Kg) |
4.2 (1.91) |
||||||||
F20-SIT/FIT/SCREEN |
G 1/8″ Male M5 Female |
0.87 (22.1) |
0.70 (17.8) |
1.87 lbs (0.85 Kg) |
4.2 (1.91) |
||||||||
Fitting for F20 Cups | Notes | Suspensions | |||||||||||
20-30 FITTING
A-3150196 |
|
||||||||||||
|
|||||||||||||
20-30 STRENGTHENING A-0101084 |
The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||||||||||
20-30 CONNECTION PLATE
A-3150141 |
|
||||||||||||
|
|||||||||||||
20-30 LOCKING SPACER
A-3150140 |
The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom. |
||||||||||||
F25 Cups | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
N/A | 1.08 (27.5) |
0.37 (9.4) |
2.49 lbs (1.1 Kg) |
5.6 (2.54) |
|||||||||
F25-SIT (Translucent Silicone) A-3150127S 31.50.127S F25.20 |
N/A | 1.08 (27.5) |
0.37 (9.4) |
2.49 lbs (1.1 Kg) |
5.6 (2.54) |
||||||||
A-F25-P60 (Thermo-elastic Polyurethane) |
N/A | 1.08 (27.5) |
0.37 (9.4) |
2.49 lbs (1.13 Kg) |
5.6 (2.54) |
||||||||
A-F25-P30 (Thermo-elastic Polyurethane)** |
N/A | 1.08 (27.5) |
0.37 (9.4)) |
2.49 lbs (1.13 Kg) |
5.6 (2.54) |
||||||||
A-F25-P50 |
N/A | 1.08 (27.5) |
0.37 (9.4) |
2.49 lbs (1.13 Kg) |
5.6 (2.54) |
||||||||
F25 Cups with 20-30 Fitting | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F25-NEO/1PC FITTING |
G 1/8″ Male M5 Female |
1.08 (27.5) |
0.70 (17.8) |
2.49 lbs (1.13 Kg) |
5.6 (2.54) |
||||||||
F25-SIT/1PC FITTING |
G 1/8″ Male M5 Female |
1.08 (27.5) |
0.70 (17.8) |
2.49 lbs (1.13 Kg) |
5.6 (2.54) |
||||||||
F25 Cups with 20-30 Connection Plate | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F25-NEO/FIT/SCREEN |
G 1/8″ Male M5 Female |
1.08 (27.5) |
0.70 (17.8) |
2.49 lbs (1.13 Kg) |
5.6 (2.54) |
||||||||
F25-SIT/FIT/SCREEN |
G 1/8″ Male M5 Female |
1.08 (27.5) |
0.70 (17.8) |
2.49 lbs (1.13 Kg) |
5.6 (2.54) |
||||||||
Fitting for F25 Cups | Notes | Suspensions | |||||||||||
20-30 FITTING
A-3150196 |
|
||||||||||||
|
|||||||||||||
20-30 STRENGTHENING A-0101084 |
The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||||||||||
20-30 CONNECTION PLATE
A-3150141 |
|
||||||||||||
|
|||||||||||||
20-30 LOCKING SPACER
A-3150140 |
The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom. |
||||||||||||
F30 Cups | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
N/A | 1.25 (31.6) |
0.40 (10.1) |
3.1 lbs (1.4 Kg) |
7.0 (3.18) |
|||||||||
F30-SIT (Translucent Silicone) A-3150239S 31.50.239S F30-2.20 |
N/A | 1.25 (31.6) |
0.40 (10.1) |
3.1 lbs (1.4 Kg) |
7.0 (3.18) |
||||||||
A-F30-P60 (Thermo-elastic Polyurethane) |
N/A | 1.25 (31.6) |
0.40 (10.1) |
3.1 lbs (1.4 Kg) |
7.0 (3.18) |
||||||||
A-F30-P30 (Thermo-elastic Polyurethane)** |
N/A | 1.25 (31.6) |
0.40 (10.1) |
3.1 lbs (1.4 Kg) |
7.0 (3.18) |
||||||||
A-F30-P50 |
N/A | 1.25 (31.6) |
0.40 (10.1) |
3.1 lbs (1.4 Kg) |
7.0 (3.18) |
||||||||
F30 Cups with 20-30 Fitting | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F30-NEO/1 PC FITTING |
G 1/8″ Male M5 Female |
1.25 (31.6) |
0.70 (17.8) |
3.1 lbs (1.4 Kg) |
7.0 (3.18) |
||||||||
F30-SIT/1PC FITTING |
G 1/8″ Male M5 Female |
1.25 (31.6) |
0.70 (17.8) |
3.1 lbs (1.4 Kg) |
7.0 (3.18) |
||||||||
F30 Cups with 20-30 Connection Plate | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F30-NEO/FIT/SCREEN |
G 1/8″ Male M5 Female |
1.25 (31.6) |
0.70 (17.8) |
3.1 lbs (1.4 Kg) |
7.0 (3.18) |
||||||||
F30-SIT/FIT/SCREEN |
G 1/8″ Male M5 Female |
1.25 (31.6) |
0.70 (17.8) |
3.1 lbs (1.4 Kg) |
7.0 (3.18) |
||||||||
Fitting for F30 Cups | Notes | Suspensions | |||||||||||
20-30 FITTING
A-3150196 |
|
||||||||||||
|
|||||||||||||
20-30 STRENGTHENING A-0101084 |
The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||||||||||
20-30 CONNECTION PLATE
A-3150141 |
|
||||||||||||
|
|||||||||||||
20-30 LOCKING SPACER
A-3150140 |
The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom. |
||||||||||||
F40 Cups | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
|
F40-NEO |
N/A | 1.66 (42.1) |
0.50 (12.7) |
4.89 lbs (2.22 Kg) |
11 (4.99) |
|||||||
F40-SIT (Translucent Silicone) A-3150129S 31.50.129S F40-2.20 |
N/A | 1.66 (42.1) |
0.50 (12.7) |
4.89 lbs (2.22 Kg) |
11 (4.99) |
||||||||
A-F40-P60 (Thermo-elastic Polyurethane) |
N/A | 1.66 (42.1) |
0.50 (12.7) |
4.89 lbs (2.22 Kg) |
11 (4.99) |
||||||||
A-F40-P30 (Thermo-elastic Polyurethane)** |
N/A | 1.66 (42.1) |
0.50 (12.7) |
4.89 lbs (2.22 Kg) |
11 (4.99) |
||||||||
A-F40-P50 |
N/A | 1.66 (42.1) |
0.50 (12.7) |
4.89 lbs (2.22 Kg) |
11 (4.99) |
||||||||
F40 Cups with 40/30-2/BL30 Fitting | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F40-NEO/1PC FITTING |
G 1/8″ Female | 1.66 (42.1) |
0.80 (20.3) |
4.89 (2.22) |
11 (4.99) |
||||||||
F40-SIT/1PC FITTING |
G 1/8″ Female | 1.66 (42.1) |
0.80 (20.3) |
4.89 (2.22) |
11 (4.99) |
||||||||
F40 Cups with 40 Connection Plate | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F40-NEO/FIT/SCREEN |
G 1/8″Female | 1.66 (42.1) |
0.90 (22.9) |
4.89 (2.22) |
11 (4.99) |
||||||||
F40-SIT/FIT/SCREEN |
G 1/8″ Female | 1.66 (42.1) |
0.90 (22.9) |
4.89 (2.22) |
11 (4.99) |
||||||||
Fitting for F40 Cups | Notes | Suspensions | |||||||||||
A-3250001 |
The 40/30-2/BL30 FITTING uses a Strengthening Ring 40. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ NPS Thread. |
||||||||||||
STRENGTHENING A-0101085 |
The Strengthening Ring 40 is used with the above 40/30-2/BL30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||||||||||
A-3150143 |
The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. |
||||||||||||
A-3150142 |
The 40 Locking Spacer is used with the above 40 Connection Plate. It presses in from the bottom. |
||||||||||||
F50 Cups | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
|
F50-NEO |
N/A | 2.10 (53.3) |
0.70 (17.7) |
9.33 lbs (4.23 Kg) |
21 (9.53) |
|||||||
F50-SIT (Translucent Silicone) A-3150130S 31.50.130S F50-2.20 |
N/A | 2.10 (53.3) |
0.70 (17.7) |
9.33 lbs (4.23 Kg) |
21 (9.53) |
||||||||
A-F50-P60 (Thermo-elastic Polyurethane) |
N/A | 2.10 (53.3) |
0.70 (17.7) |
9.33 lbs (4.23 Kg) |
21 (9.53) |
||||||||
A-F50-P30 (Thermo-elastic Polyurethane)** |
N/A | 2.10 (53.3) |
0.70 (17.7) |
9.33 lbs (4.23 Kg) |
21 (9.53) |
||||||||
A-F50-P50 (Thermo-elastic Polyurethane)** |
N/A | 2.10 (53.3) |
0.70 (17.7) |
9.33 lbs (4.23 Kg) |
21 (9.53) |
||||||||
F50 Cups with 50 Fitting | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F50-NEO/1PC FITTING |
G 1/8″ Female | 2.10 (53.3) |
1.10 (27.9) |
9.33 lbs (4.23 Kg) |
21 (9.53) |
||||||||
F50-SIT/1PC FITTING |
G 1/8″ Female | 2.10 (53.3) |
1.10 (27.9) |
9.33 lbs (4.23 Kg) |
21 (9.53) |
||||||||
F50 Cups with 50 Connection Plate | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F50-NEO/FIT/SCREEN |
G 1/8″ Female | 2.10 (53.3) |
1.00 (25.4) |
9.33 lbs (4.23 Kg) |
21 (9.53) |
||||||||
F50-SIT/FIT/SCREEN |
G 1/8″ Female | 2.10 (53.3) |
1.00 (25.4 |
9.33 lbs (4.23 Kg) |
21 (9.53) |
||||||||
Fitting for F50 Cups | Notes | Suspensions | |||||||||||
50/50-2 FITTING |
The 50/50-2 Fitting is utilized with a Strengthening Ring 50. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. |
||||||||||||
The A-05AG-18m-G Fitting is utilized with a Strengthening Ring 50. It allows you to screw into any of the SLSA-2 Suspensions using HS18G-18F-G fitting. |
|||||||||||||
STRENGTHENING A-0101086 |
The Strengthening Ring 50 is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||||||||||
A-3150145 |
The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread. |
||||||||||||
A-3150144 |
The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom. |
||||||||||||
F75 Cups | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
|
F75-NEO |
N/A | 3.02 (76.5) |
0.60 (15.2) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
|||||||
F75-SIT |
N/A | 3.02 (76.5) |
0.60 (15.2) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
A-F75-P50 (Urethane 50) |
N/A | 3.02 (76.5) |
0.60 (15.2) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
A-F75-P60 (Urethane 60) |
N/A | 3.02 (76.5) |
0.60 (15.2) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
A-F75-NM (NOMATHANE®) |
N/A | 3.02 (76.5) |
0.60 (15.2) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
F75 Cups with 75 Connection Plate | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F75-NEO/CON PLATE (Nitrile) A-3150037P 31.50.037P |
N/A | 3.02 (76.5) |
0.60 (15.2) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
F75-SIT/CON PLATE (Translucent Silicone) A-3150037S 31.50.037S |
N/A | 3.02 (76.5) |
0.60 (15.2) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
A-F75-P50/CON PLATE (Urethane 50) A-F75-P50-W |
N/A | 3.02 (76.5) |
0.60 (15.2) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
A-F75-P60/CON PLATE (Urethane 60) A-F75-P60-W |
N/A | 3.02 (76.5) |
0.60 (15.2) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
A-F75-NM-W (NOMATHANE®) |
N/A | 3.02 (76.5) |
0.60 (15.2) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
F75 Cups with 75 Fitting | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F75-NEO/FIT/SCREEN 1/8 |
G 1/8″ Female | 3.02 (77.0) |
0.80 (20.3) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
F75-SIT/FIT/SCREEN 1/8 |
G 1/8″ Female | 3.02 (77.0) |
0.80 (20.3) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
A-F75-P50/FIT/SCREEN 1/8 (Urethane 50) A-F75-P50-FIT |
G 1/8″ Female | 3.02 (77.0) |
0.80 (20.3) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
A-F75-P60/FIT/SCREEN 1/8 (Urethane 60) A-F75-P60-FIT |
G 1/8″ Female | 3.02 (77.0) |
0.80 (20.3) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
A-F75-NM-FIT (NOMATHANE®) |
G 1/8″ Female | 3.02 (77.0) |
0.80 (20.3) |
26.6 lbs (12.1 Kg) |
60 (27.22) |
||||||||
Fitting for F75 Cups | Notes | Suspensions | |||||||||||
A-3150043 |
The 75 Connection Plate 1/8 is to be imbedded in the 75 Series suction cup’s rubber portion allowing the 75 Fitting 1/8″ to be held in place. |
||||||||||||
A-3250006 |
The 75 Fitting 1/8″ with 1/8″ female center port connection with optional M5 (10/32) female port often used as a blow-off port. |
||||||||||||
F110 Cups | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F110-NEO |
N/A | 4.30 (109.2) |
0.8 (20.3) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
F110-SIT |
N/A | 4.30 (109.2) |
0.8 (20.3) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
A-F110-P50 (Urethane 50) |
N/A | 4.30 (109.2) |
0.8 (20.3) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
A-F110-P60 (Urethane 60) |
N/A | 4.30 (109.2) |
0.8 (20.3) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
F110 Cups with 110 Connection Plate | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F110-NEO/CON PLATE (Nitrile) A-3150038P 31.50.038P |
N/A | 4.30 (109.2) |
0.8 (20.3) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
F110-SIT/CON PLATE (Translucent Silicone) A-3150038S 31.50.038S |
N/A | 4.30 (109.2) |
0.8 (20.3) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
A-F110-P50/CON PLATE (Urethane 50) A-F110-P50-W |
N/A | 4.30 (109.2) |
0.8 (20.3) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
A-F110-P60/CON PLATE (Urethane 60) A-F110-P60-W |
N/A | 4.30 (109.2) |
0.8 (20.3) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
F110 Cups with 110 Fitting | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F110-NEO/FIT/SCREEN |
G 1/2″ Female | 4.30 (109.2) |
1.0 (25.4) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
F110-SIT/FIT/SCREEN |
G 1/2″ Female | 4.30 (109.2) |
1.0 (25.4) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
F110-P50/FIT/SCREEN (Urethane 50) A-F110-P50-FIT |
G 1/2″ Female | 4.30 (109.2) |
1.0 (25.4) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
F110-P60/FIT/SCREEN (Urethane 60) A-F110-P60-FIT |
G 1/2″ Female | 4.30 (109.2) |
1.0 (25.4) |
55.6 lbs (25.2 Kg) |
125 (56.7) |
||||||||
Fittings for F110 Cups | Notes | Suspensions | |||||||||||
A-3250007 |
The 110 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port. |
||||||||||||
A-3150044 |
The 110 Connection Plate is to be imbedded in the 110 Series suction cup’s rubber portion allowing the 110 Fitting 1/2″ to be held in place. |
||||||||||||
F150 Cups | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F150-NEO |
N/A | 6.13 (155.6) |
1.0 (25.4) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150-SIT |
N/A | 6.13 (155.6) |
1.0 (25.4) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150-P50 (Urethane 50) A-F150-P50 |
N/A | 6.13 (155.6) |
1.0 (25.4) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150-P60 (Urethane 60) A-F150-P60 |
N/A | 6.13 (155.6) |
1.0 (25.4) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150 Cups with 150 Connection Plate | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F150-NEO/CON PLATE (Nitrile) A-3150039P 31.50.039P |
N/A | 6.13 (155.6) |
1.0 (25.4) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150-SIT/CON PLATE (Translucent Silicone) A-3150039S 31.50.039S |
N/A | 6.13 (155.6) |
1.0 (25.4) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150-P50/CON PLATE (Urethane 50) A-F150-P50-W |
N/A | 6.13 (155.6) |
1.0 (25.4) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150-P60/CON PLATE (Urethane 60) A-F150-P60-W |
N/A | 6.13 (155.6) |
1.0 (25.4) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150 Cups with 150 Fitting | Connection Thread Size | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | |||||||
F150-NEO/FIT/SCREEN |
G 1/2″ Female | 6.13 (155.6) |
1.3 (33) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150-SIT/FIT/SCREEN |
G 1/2″ Female | 6.13 (155.6) |
1.3 (33) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150-P50/FIT/SCREEN (Urethane 50) A-F150-P50-FIT |
G 1/2″ Female | 6.13 (155.6) |
1.3 (33) |
100 lbs (45 Kg) |
240 (109) |
||||||||
F150-P60/FIT/SCREEN (Urethane 60) A-F150-P60-FIT |
G 1/2″ Female | 6.13 (155.6) |
1.3 (33) |
100 lbs (45 Kg) |
240 (109) |
||||||||
Fittings for F150 Cups | Notes | Suspensions | |||||||||||
A-3150045 |
The 150 Connection Plate is to be imbedded in the 150 Series suction cup’s rubber portion allowing the 150 Fitting 1/2″ to be held in place. |
||||||||||||
A-3250008 |
The 150 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port. |
* All cups shown above are identical in size and shape to P-Style’s cups. The dimensional drawings represent the cup dimensions without a load as given by P-Style.
** These are special cups that may require minimum purchase (contact Anver Sales for additional information).
The “G” thread is also known as BSPP, commonly used world-wide for Vacuum Applications. |
|
|
|
|
More Product Information | |||
Flat Vacuum Cups with Valves |