|
Vacuum Cups and Suction Cups
Vacuum Cup Fittings – Group 1
Barbed Fittings which Push-In from the Top for ANVER Universal Group 1 Suction Cups
|
|
-
ANVER divides small universal vacuum suction cups into three groups based on mounting specifications and style. Group 1 Fittings, shown here, are simple barbed fittings that push in from the top of the cup.
-
Within each vacuum fitting group, the hardware is interchangeable with all other suction cups within the group. Any Group 1 fitting will fit any Group 1 suction cup. It may also fit other suction cups with similarly sized holes in the cups’ centers. Contact ANVER to verify suitability.
-
These all-metal, electro-less nickel-plated brass fittings are reusable. Once you buy the cups with fittings, you only need to buy replacement rubber cups in the future.
-
The suction cup is simply pressed onto the end of the barbed fitting to hold tight. Replacement takes only a few seconds and the fitting does not need to be unscrewed.
-
These specific cup fittings are top-quality production grade fittings made by ANVER Corp. in the USA.
|
Group 1 Vacuum Cup Fittings:
|
|
 |
Product Photo
(Click to Enlarge) |
Vacuum Fitting
Part No.
|
Connection
Thread Size
|
Thru Hole
Diameter
or Thread
in.
(mm) |
Hex Size
in.
(mm)
|
L
Height Added
to Assembly
in.
(mm)
|
H
Height
in.
(mm)
|
Weight
(In Grams) |
BM5,
BM10-32,
BM6,
B18M,
B18M-G
B18F,
B18F-G
|
|
|
 |
 |
 The BM5 5 mm barbed fitting w/ Captured O-Ring screws onto the SLSA-1 suspensions
|
| BM5 |
M5
(5 mm)
male |
0.09
(2.3) |
0.31
(8)
|
0.20
(5) |
0.35
(9.0) |
2.9
Grams |
|
|
|
 |
The BM10-32 barbed fitting w/ Captured O-Ring can screw into 10-32 UNF or 5 mm female
|
| BM10-32 |
10-32
UNF
male |
0.10
(2.5) |
0.31
(8) |
0.20
(5) |
0.35
(9.0) |
2.8
Grams |
|
|
|
 |
The BM6 6mm barbed fitting w/ Captured O-Ring can screw into any 6 mm female fitting or mounting
|
| BM6 |
M6
(6 mm)
male
|
0.13
(3.4) |
0.38
(9.5)
|
0.20
(5)
|
0.39
(10.0)
|
3.5
Grams |
| – |
|
Product Photo |
Part No. |
Connection |
Thru Hole |
Hex Size |
Added Height |
Overall Height |
Weight |
|
|
|
 |
The B18F-G Barbed fitting is a G1/8″ female thread and allows you to screw into the SLSA-2 Suspensions
|
|
B18F-G
|
G1/8″
female |
0.13
(3.6) |
0.55
(14) |
0.47
(12)
|
–
|
4.1
Grams |
|
|
|
|
The B18F Barbed fitting is a 1/8″ female NPT thread
|
|
B18F
|
1/8″
NPT
female |
0.17
(4.2) |
0.5
(12.6) |
0.47
(12)
|
–
|
8.1
Grams |
|
|
|
 |
The B18M Barbed fitting is a 1/8″ male NPT with a 10–32 UNF inside thread
|
| B18M |
1/8″
NPT
male
|
10-32
UNF
female |
0.17
(4.2) |
0.5
(12.6) |
0.21
(5.2) |
0.51
(13.0) |
9.9
Grams |
|
|
|
 |
The B18M-G Barbed fitting is a G1/8″ male with a 5 mm female inside thread
|
| B18M-G |
G1/8″
male
|
M5
(5 mm)
female |
0.14
(3.5) |
0.55
(14) |
0.24
(6) |
0.53
(13.5) |
12.0
Grams |
 |
The “G” thread is also known as BSPP, commonly used world-wide for vacuum applications. |
Note: 5 mm and 10-32 Male screws directly into 5 mm Female fittings.
Other Adapter Fittings for Other Connections:
Female-to-Female
Adapters |
Female-to-Male
Adapters |
Male-to-Male
Adapters |
Group 2 Vacuum
Cup Fittings |
Group 3 Vacuum
Cup Fittings |
 |
 |
 |
 |
 |
Vacuum Cups that use Push-In Style Group 1 Vacuum Cup Fittings:
| Flat Suction Cups |
Single Bellows Suction Cups |
Double Bellows Suction Cups |
|
F5-, F10-, F15-, F20-, F25-
|
B1.5-5-, B1.5-11-, B1.5-14–, B1.5-16-, B1.5-20-, B1.5-20-, B1.5-22-, B1.5-25-
|
B2.5-5-, B2.5-7-, B2.5-9-, B2.5-14-, B2.5-18-, B2.5-20-, B2.5-25-
|
 |
 |
 |
13600186 A
|
