Vacuum Lifting Accessories
Vacuum Lifter Parking Stands When Lifter Is Not In Use

Parking Stands for Small Vacuum Lifters

Parking Stands
In the “Down” position, which is recommended when you store the vacuum lifter, the parking stands provide support for the lifter so that the vacuum’s rubber seals will not touch the ground. This protects the seals from damage as well as helping to maintain their shape and prevent them from flattening out. In a “Folded In, Out or Up” position, standard spring loaded parking stands provide a Grab Bar for positioning the lifter easily and precisely onto the load from the side of the lifter.

Features

  • Adjustable in Four Positions: Pull Sideways, Turn, Let Go and it Locks in Position
  • Spring-Loaded Locking Mechanism Snaps into Position for One-sided, Quick Adjustments
  • ANVER Spring-Loaded, Adjustable, Four Position Parking Stands keep the vacuum sealing rings clean and debris-free. PLUS, in their other positions, they can be used to locate the lifter precisely over the load. They feature rugged steel construction.
Folded-Down Folded-Out Folded-Up Folded-In

Note: Standard spring loaded parking stands provide a Grab Bar for positioning the lifter easily and precisely onto the load from the side of the lifter.

rfq Part Number For Use With Mounting Pair
Weight
lb (kg)
PS-150-3X3 3″ sq beams up to 120″ long with cap. up to 2200 lbs  Bolt on 16 (7) 
PS-150-3X6 3×6″ beams up to 190″ long with cap. up to 3000 lbs Bolt on   15 (6.8)
72000173 bolt on to generators up to 2200 lbs  Bolt on  22 (10)
72000174  bolt on to generators up to 4400 lbs  Bolt on  22 (10)
72000038  3×6″ beams up to 190″ long with cap. 2000 lbs to 4400 lbs  Bolt on 32 (15) 
 72000040  3×6″ beams up to 231″ long with cap. 2000 lbs to 4600 lbs  Adjustable slide mounted 59 (27) 
72000041   5×7″ beams up to 325″ long with cap. 3000 lbs to 6000 lbs  Adjustable slide mounted 68 (31) 
 72000128  5×7″ beams up to 250″ long with cap. 4000 lbs to 9600 lbs  Bolt on  37 (17)
 Adjustable Slide Mounted Parking Stands – Click to Enlarge


13600004 F

Bolt-On Positioning Handles

rfq Part Number Product Photo Description For Use With Mounting
PS-150-PH Positioning Handles, Bolt-On, Pair, ø1.25″ (ø31.75 mm) x 5″ (127 mm) long short handles (21301149)

PS-150 Series Parking Stands  Bolt on

 

Parking Stands for Large Vacuum Lifters

Multi-position, telescopic parking stands provide a convenient means of storing ANVER lifters when not in use. They permit storage of the lifter with the vacuum pad seals off the ground, reducing the chance of damage to the seals.

Available in three different styles depending on lift frame:

  • Bolt-on to end of beam
  • Adjustable on beams with welded angle (mounted below main beam)
  • Adjustable on a slide along the main beam for longer lifters

 

rfq Part Number Item
Number
Leg
Length
in.
(mm)
For Use With Mounting Pair
Weight
lb (kg)
72000222 72000222 22
(559)
End of
3×6 Beams
M10 115
(52)
72000189 72000189 22
(559)
End of
5×7 Beams
M12 128
(58)
72000164 72000164 27.5
(699)
5×7 Beams Adjustable
Slide Mounted
161
(73)
72000158 72000158 27.5
(699)
6×8 Beams Adjustable
Slide Mounted
165
(75)
PST20-19-21 72000205 21
(533)
GFT Series
Frames
Adjustable
Beneath Beam
115
(52)
PST30-31-21 72000209 21
(533)
GFT Series
Frames
Adjustable
Beneath Beam
116
(53)
PST45-31-21 72000206 21
(533)
GFT Series
Frames
Adjustable
Beneath Beam
129
(59)
PST67-31-24 72000206 24
(610)
GFT Series
Frames
Adjustable
Beneath Beam
135
(61)
 Pin-Release Parking Stands – Click to Enlarge
 

Note: Parking Stands Assemblies are based on lifter configuration, pad suspension, and load type. Any variations of the criteria may result in a part number change at the discretion of Anver Corporation.

13600005 C