Vacuum Lifting Accessories Vacuum Lifter Parking Stands When Lifter Is Not In Use
Parking Stands for Small Vacuum Lifters
Parking Stands
In the “Down” position, which is recommended when you store the vacuum lifter, the parking stands provide support for the lifter so that the vacuum’s rubber seals will not touch the ground. This protects the seals from damage as well as helping to maintain their shape and prevent them from flattening out. In a “Folded In, Out or Up” position, standard spring loaded parking stands provide a Grab Bar for positioning the lifter easily and precisely onto the load from the side of the lifter.
Features
Adjustable in Four Positions: Pull Sideways, Turn, Let Go and it Locks in Position
Spring-Loaded Locking Mechanism Snaps into Position for One-sided, Quick Adjustments
ANVER Spring-Loaded, Adjustable, Four Position Parking Stands keep the vacuum sealing rings clean and debris-free. PLUS, in their other positions, they can be used to locate the lifter precisely over the load. They feature rugged steel construction.
Folded-Down
Folded-Out
Folded-Up
Folded-In
Note: Standard spring loaded parking stands provide a Grab Bar for positioning the lifter easily and precisely onto the load from the side of the lifter.
Part Number
For Use With
Mounting
Pair
Weight
lb (kg)
PS-150-3X3
3″ sq beams up to 120″ long with cap. up to 2200 lbs
Bolt on
16 (7)
PS-150-3X6
3×6″ beams up to 190″ long with cap. up to 3000 lbs
Bolt on
15 (6.8)
72000173
bolt on to generators up to 2200 lbs
Bolt on
22 (10)
72000174
bolt on to generators up to 4400 lbs
Bolt on
22 (10)
72000038
3×6″ beams up to 190″ long with cap. 2000 lbs to 4400 lbs
Bolt on
32 (15)
72000040
3×6″ beams up to 231″ long with cap. 2000 lbs to 4600 lbs
Adjustable slide mounted
59 (27)
72000041
5×7″ beams up to 325″ long with cap. 3000 lbs to 6000 lbs
Adjustable slide mounted
68 (31)
72000128
5×7″ beams up to 250″ long with cap. 4000 lbs to 9600 lbs
Bolt on
37 (17)
Adjustable Slide Mounted Parking Stands – Click to Enlarge
13600004 F
Bolt-On Positioning Handles
Part Number
Product Photo
Description
For Use With
Mounting
PS-150-PH
Positioning Handles, Bolt-On, Pair, ø1.25″ (ø31.75 mm) x 5″ (127 mm) long short handles (21301149)
PS-150 Series Parking Stands
Bolt on
Parking Stands for Large Vacuum Lifters
Multi-position, telescopic parking stands provide a convenient means of storing ANVER lifters when not in use. They permit storage of the lifter with the vacuum pad seals off the ground, reducing the chance of damage to the seals.
Available in three different styles depending on lift frame:
Bolt-on to end of beam
Adjustable on beams with welded angle (mounted below main beam)
Adjustable on a slide along the main beam for longer lifters
Part Number
Item
Number
Leg
Length
in.
(mm)
For Use With
Mounting
Pair
Weight
lb (kg)
72000222
72000222
22
(559)
End of
3×6 Beams
M10
115
(52)
72000189
72000189
22
(559)
End of
5×7 Beams
M12
128
(58)
72000164
72000164
27.5
(699)
5×7 Beams
Adjustable
Slide Mounted
161
(73)
72000158
72000158
27.5
(699)
6×8 Beams
Adjustable
Slide Mounted
165
(75)
PST20-19-21
72000205
21
(533)
GFT Series
Frames
Adjustable
Beneath Beam
115
(52)
PST30-31-21
72000209
21
(533)
GFT Series
Frames
Adjustable
Beneath Beam
116
(53)
PST45-31-21
72000206
21
(533)
GFT Series
Frames
Adjustable
Beneath Beam
129
(59)
PST67-31-24
72000206
24
(610)
GFT Series
Frames
Adjustable
Beneath Beam
135
(61)
Pin-Release Parking Stands – Click to Enlarge
Note: Parking Stands Assemblies are based on lifter configuration, pad suspension, and load type. Any variations of the criteria may result in a part number change at the discretion of Anver Corporation.