VPF-57-DCP Series Battery Powered Vacuum Generators

Battery Powered Vacuum Generators
Self-Contained Battery Vacuum Stations – VPF-57-DCP Series

ANVER’s VPF-57-DCP Vac-Pack Vacuum Generator contains many of the same features as the standard VPF-57-AC Series but includes a heavy duty rechargeable 12 volt DC battery, making it suitable for handling non-porous loads. It is commonly used for special applications where AC power is not readily available.

Your choice of two plug-in, interchangeable control styles to suit your application:

Radio Controlled 3 Button Attach / Release / Interlock Transmitter with Plug-In Receiver
Hand held device with attach, release and safety interlock push buttons with holster mounted on front handlebar. Plug-in receiver is located on back of vac-pack with mounting brackets. Contact Factory for more information.

Kit Includes:

Radio Control Transmitter and Mounting Holster
Radio Control Receiver and Mounting Bracket

Plug-In 2 Button Attach and Release Control Pendant
Attach and release push-buttons located on control pendant with 10ft long coiled cord.

Kit Includes:

Pendant Control and Mounting Holster
Plug-In, Replaceable Coil Cord, 10 ft. long.

Generator shown with Radio Controls

Features:

Vacuum Control Module
A solid-state Vacuum Control Module combines all the required vacuum generator controls in one rugged unit. This controls all vacuum pump functions, safety lights and is fitted with a standard audible vacuum leakage warning system.
Energy Saver Technology
A vacuum-controlled switch shuts off the vacuum pump when the pre-set vacuum level is reached, reducing wear and tear on the pump.
Easy to Replace Battery
Battery can be easily removed for charging. We recommend purchasing a spare battery. Use one on the lifter, while charging the other for zero downtime.
Battery Gauge
Gauge for battery charge level with hour meter.
Front Mounted Controls and Digital Gauges
Digital vacuum gauges are mounted on front cover for continuous monitoring by operator. The power switch includes built-in circuit breaker.
Indicator Light
Amber light indicates “power on” for Vac-Pack Vacuum Generator.
Ergonomic Adjustable Front Handlebar
Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller size loads.
Vacuum Check Valve and Reservoir
A check valve with vacuum reservoir helps to maintain vacuum if electrical power is interrupted, for safe handling of non-porous loads.

Maintenance:

New Redesign Featuring New Vacuum Pump
Updated for ease of inspection and replacement of key components, using quick disconnect and reusable fittings.
Easily Accessible Dual Vacuum Filters
(2) Hi capacity air filters provides protection against pump damage. They are mounted on the front handlebar for easy routine inspection and cleaning.

General:

Frame Construction
The VPF-57-DCP Series has a fully welded frame with a vacuum reservoir and a lifting bail and beam mounting hardware.
• Standard for 3”x3” beam [9” hardware centers] with a structural lifting capacity rating up to 2,200 lbs (998 kg).
• Heavy Duty for 3”x6” beam [9” hardware centers] and reinforced lifting bail with a structural lifting capacity rating up to 4,400 lbs (1,996 kg).
Battery Specifications
12 Volt/12 amp, sealed, rechargeable, AGM (Absorbed Glass Mat) battery can provide full 8 hour shift operation in many applications.

Options:

Recommended Battery Charger (CHARGER-DCP2)
Battery Charger, Smart Charge (12 VDC) (Sold Separately). You can use other chargers as long as it meets the above specifications.

Specifications:

Request For Quote
Generator Model Number	VPF-57-DCP
Rated Load Capacity (3x3 Beams) [lbs (kg.)]	2200 (998)
Rated Load Capacity (3x6 Beams) [lbs (kg.)]	4400 (1996)
Unit Weight (3x3 Beams) [lbs (kg.)]	84 (38)
Unit Weight (3x6 Beams) [lbs (kg.)]	86 (39)
A Max. Headroom (3x3 Beams) [in. (mm)]	18 (457)
A Max. Headroom (3x6 Beams) [in. (mm)]	20 (508)
B Handlebar Height (3x3 Beams) [in. (mm)]	8 (203)
B Handlebar Height (3x6 Beams) [in. (mm)]	10 (254)
C Generator Width [in. (mm)]	20.38 (518)
D Handlebar Length [in. (mm)]	34 (864)
E Hardware Centers [in. (mm)]	9 (229)
F Vacuum Pump Depth [in. (mm)]	4.6 (117)
Vacuum Pump HP	1/16
Generator Battery Power DC	12V DC, 12 Amp Hours
Energy Saver / Quiet Automatic Shut-Off	YES

Control Styles Available (Both are Plug-In & Interchangeable)
	Product Photo	Part Number	Description
		RCPK-ARI	Radio Control Kit for Vac-Packs, Attach/Release Kit Includes: Radio Control Transmitter and Mounting Holster Radio Control Receiver and Mounting Bracket
		EPK-AC/DC-AR	Pendant Control Kit for Vac-Packs, Attach/Release Kit Includes: Pendant Control and Mounting Holster Plug-In, Replaceable Coil Cord, 10 ft. long.

Battery Charger and Accessories

Product
Photo

Part
Number

Description

Item Weight
lb
(Kg)

CHARGER-DCP2

Battery Charger, Smart Charge (12 VDC) w/ Adapter Harness

Includes:

Battery Charger/Maintainer
Harness, Battery Charger, Modified Connector, VPF-57-DCP

1.84
(0.84)

Recommended Spare Parts
	Product Photo	Part Number	Description
		BPR-57-DCP2	Battery Pack Replacement Kit, Plug-in, VPF-57-DCP Series
		AGM-12V-12	Battery, 12Volt , 12 Amp Hours, Absorbed Glass Mat
		34000267	Polarized Plug with Spades from Battery to Charger or VPF-57 Battery Vac-Pack
		28100702	Battery Holder, Sheet Metal for VPF-57 Battery Vac-Packs
		RCT-PCLIP	Plastic Belt Clip for RCT Transmitter
		RCT-MCLIP	Metal Belt Clip for RCT Transmitter
		RCT-SCREW	Belt Clip Screw for RCT Transmitter
		RCT-NYLONCOVER	Protective Nylon Cover for RCT Transmitter