LBA-Series Lifting Bail Assemblies

ANVER’s LBA-Series lifting bail assemblies allow you to remotely mount the vacuum generator while using ANVER lifting frames and pad attachments.

The vacuum attach-and-release cycle is controlled by a switch connected to the lifting bail. When the unit is lowered onto the load and the suspension chain slackens, the full weight of the lifter is on the load, and a switch automatically starts the attachment process. Once the proper vacuum level has been achieved, a green light will illuminate letting you know it is now safe to lift. When you are ready to put the load down, lower the unit until the chain is slack, the switch will now start the release process. Once vacuum has been released you can now raise the unit with the hoist controls and you are now prepared for your next lift.

Keep in mind most vacuum lifters have the vacuum generator below the hook and is always recommended. It is easier to setup and festoon as well as being safer as the check valve is below the hook in case a hose is damaged. The LBA-Series is used in a minutely small number of applications in which there is no headroom to allow a larger generator to be mounted below the hook.

Slider
LBA300-ARSL-QD1 Shown above with PA1117-S-3 (Sold Separately)   
LBA300-BAIL Lifting Bail Assembly
your 360 images

Includes:

  • Mounting Hardware for 3″ Sq. Beams (9″ Centers)

Request For Quote
Model NumberLBA300-BAIL
Structural Capacity [lbs (kg.)]2200 (998)
Headroom [in (mm)]8 (203)
Unit Weight [lbs (kg.)]11 (5)

LBA300-QD1 Lifting Bail Assembly
your 360 images

Includes:

  • Manifold vacuum gauge for operator to monitor safe vacuum level.
  • Quick-disconnect for easily changing pad attachments.
  • Adjustable Front Handlebar
  • Mounting Hardware for 3″ Sq. Beams (9″ Centers)

Request For Quote
Model NumberLBA300-QD1
Structural Capacity [lbs (kg.)]2200 (998)
Headroom [in (mm)]8 (203)
Unit Weight [lbs (kg.)]20 (10)

LBA300-ARSL-QD1 Lifting Bail Assembly
your 360 images

Includes:

  • Vacuum Leakage Sensor
  • Attach/Release Slide Valve with Safety Lockout
  • Manifold vacuum gauge for operator to monitor safe vacuum level.
  • Quick-disconnect for easily changing pad attachments.
  • Adjustable Front Handlebar
  • Mounting Hardware for 3″ Sq. Beams (9″ Centers)

Request For Quote
Model NumberLBA300-ARSL-QD1
Structural Capacity [lbs (kg.)]2200 (998)
Headroom [in (mm)]8 (203)
Unit Weight [lbs (kg.)]24 (11)

 

Optional Accessories
Product
Photo
Part
Number
   Description
32000820-L   Generator Manifold Assy., (2) 3/8″ NPT Port for Lifting Frames, 3/8″ Quick Disconnect Plug
32000820-QD2   Generator Manifold Assy., (2) 3/8″ Quick Disconnect Socket for Pad Attachment, 3/8″ Quick Disconnect Plug
32000820-L3P/6P   Generator Manifold Assy., (3) 3/8″ Hose Barb for Lifting Frames, 3/8″ Quick Disconnect Plug
22600095   Counterweight Assembly for LBA Series, 16 lb (7.26 kg), with Mounting Hardware
  [NOT COMPATIBLE WITH LBA300-BAIL]
22600100   Counterweight Assembly for LBA Series, 27 lb (12.2 kg), with Mounting Hardware
  [NOT COMPATIBLE WITH LBA300-BAIL]

 

Related Products from ANVER
Standard Modular Vacuum Generators Standard Vacuum Lifting Frames Standard Modular Pad Attachments
Standard Modular Vacuum Generators Standard Vacuum Lifting Frames Standard Modular Pad Attachments

 

13600006

Slider