Vacuum Lifting Pad Attachments
Featuring Vacuum Pads with Hand Replaceable Slip-on Sealing Rings
ANVER Vacuum Lifters can be outfitted with a variety of Interchangeable Vacuum Pads and Vacuum Lifting Attachments for a wide range of material handling applications. Various multiple vacuum pad configurations can be installed on most of our standard vacuum generators. The below Vacuum Lifting Pad Attachments feature ANVER’s proprietary SSR Series of Hand Replaceable Slip-On Vacuum Sealing Rings. With SSR Sealing Rings, ANVER Vacuum Lifters are more economical to operate as the vacuum seals can easily be replaced in minutes with no tools required for removal or installation. ANVER SSR Sealing Rings also feature a short lip design for rapid vacuum attachment and release.
NOTE: Not compatible with EZ-Tilt-(Series) attachments.
*The cup capacities shown above are based on 24″Hg at sea level with a safety factor of two (2) in the horizontal (flat),
and four (4) in the vertical (upright).
Rated Load Capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum.
**”A” = Minimum Distance between Inner Cup Centers
***”B” = Minimum Distance between Outer Cup Centers