ANVER Vacuum Material Handling

Features:

• Front Mounted Controls and Gauges
  Vacuum indicator gauge is front mounted for continuous monitoring by the operator. The power switch includes a built-in circuit breaker.
• Ergonomic Control Handlebar 
  Easy to grasp, large loop handlebar allows the operator to easily and safely maneuver the attached load without pushing or pulling on the load itself.
• Slide Control Valve
  The slide valve permits rapid vacuum attach and release and is mounted to the handlebar for convenient control by the operator.
• Vacuum Check Valve
  An internal check valve (VPF-07 Series also has a vacuum reservoir) helps to maintain vacuum if the electrical power is interrupted, for safe handling of non-porous loads.
• Twistlock Power Cord Connectors
  Twistlock connectors guard against accidental power cord separation. Both plug and receptical halves are provided.

Maintenance:

• Air Filter
  A rear-mounted over-sized air filter features a screw-on clear filter bowl for easy filter cleaning
• Oil-less Vacuum Pump Motor
  Powerful 1/3 horsepower oil-less motor powers a high-performance 5.5 SCFM vacuum pump. The pump motor is thermally protected and is rated for 100% duty cycle.

General:

• Welded Frame Construction
  The VPF-05 has a fully welded frame with a load lifting capacity rating of 1,000 lb. (454 kg).
  The VPF-07 has a fully welded frame with a vacuum reservoir and a load lifting capacity rating of 2,000 lb. (909 kg).
• Versatility
  For larger load lifting capability or alternate power requirements, ANVER also offers other electric, air powered, and self-powered mechanical vacuum generators, all with standard mounting designs for interchangeability.

Vac-Pack Series
(Click for Specification Sheet)

L
in.
(mm)

W
in.
 (mm)

H
in.
 (mm)

VPF-05

22.25
(565)

14.25
(362)

15.00
(381)

VPF-07

22.25
(565)

14.25
(362)

20.50
(521)

Click here for information on 
selecting the right vacuum lifter