Electric Powered Vacuum Generators
Low Headroom Electric Powered Vacuum Generators – VPFL4-AC Series
ANVER’s Latest models of vacuum generators feature high capacity pumps, valves, filters and gauges for trouble-free operation in most demanding production environments. These light weight entry level units are designed for use with a wide assortment of vacuum lifters assemblies and pad attachments. The VPFL4-AC Series features a sturdy welded frame construction and ruggedly built, yet affordably priced for unmatched value.
- Energy Saver Technology
A vacuum-controlled valve shuts off the vacuum pump when the pre-set vacuum level is reached, reducing wear and tear on the pump.
- Front Mounted Controls and Gauge
Manifold vacuum gauge is mounted on manifold block for continuous monitoring by the operator. The electrical control box includes a on/off switch and circuit breaker.
- Ergonomic Adjustable Front Handlebar
Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller size loads.
- Slide Control Valve with Standard Safety Lock
The slide control valve assembly controls the vacuum attach and release and is mounted to the front handlebar for convenient access by the operator. The standard safety lock is to keep the slide valve in the attach position while lifting a load to prevent accidental load release.
- Vacuum Check Valve and Moisture Traps/Filters
A check valve with (2) vacuum filters helps to maintain vacuum if electrical power is interrupted, for safe handling of non-porous loads.
- Power Cord with Twistlock Plug and Receptical
Both twistlock plug and receptical are provided to prevent accidental power cord separation
- Vacuum Leakage Sensor and Warning System
The VLS is a battery powered unit consisting of solid state circuitry with microprocessor, pressure sensor, LCD digital display in inches of Hg, and audible and visual warning signs (horn and red light). System is plumbed to the Vac-Pack and monitors vacuum level triggering the alarm in the event of a leakage in vacuum level (10% leakage for VLS / 20% leakage for VLS-20).
- Oil-Less Dry Piston Vacuum Pump Motors
High performance oil-less dry piston pump capable of generating 4.3 CFM for 1/2 H.P. Pump motors are thermally protected and rated for 100% duty cycle.
- Moisture Traps / Vacuum Filters:
(2) Hi capacity air filters provides protection against pump damage. They are mounted on the front handlebar for easy routine inspection and cleaning.
- Frame Construction
VPFL4-AC Series tall type frame are fully welded with a structural lifting capacity rating of 2200 lb. (998 Kg.) for 3” sq. beams with beam mounting hardware.
For larger load lifting capacity or alternate power requirements, ANVER offers electric powered, air powered and self powered mechanical vacuum generators, all with standard mounting designs for interchangeability.
|Request For Quote|
|Rated Load Capacity [lbs (kg.)]||2200 (998)||2200 (998)|
|Unit Weight [lbs (kg.)]||60 (27)||60 (27)|
|A Maximum Headroom [in. (mm)]||14 (356)||14 (356)|
|B Handlebar Height [in. (mm)]||4.63 (118)||4.63 (118)|
|C Handlebar Width [in. (mm)]||16 (406)||16 (406)|
|D Handlebar Length [in. (mm)]||34 (864)||34 (864)|
|E Hardware Centers [in. (mm)]||9 (229)||9 (229)|
|F Vacuum Pump Depth||7.4 (188)||7.4 (188)|
|Vacuum Pump HP||1/2||1/2|
|Pump Capacity SCFM||4.3||4.3|
|Vacuum Level at Sea Level||24" Hg||24" Hg|
|Incoming Power Requirement AC||115V/1PH/60Hz/5 Amps||220-240V/1PH/50-60Hz/3 Amps|
|Fits Tube Size||3x3 (76x76)||3x3 (76x76)|
|Energy Saver / Quiet Automatic Shut-Off||YES||YES|