Vacuum Cups and Suction Cups
P-Series – Vacuum Cup and Suction Cup Fittings
![]() | ![]() | Product | ANVER and P-Series | Connection Thread Size | Fitting | Notes | |||
| ![]() | ![]() | BF3-OR | 10-32 (5 mm) male | Electro-Less | The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market. | |||
| ![]() | ![]() | BF3-SHEX | 10-32 (5 mm) male | Electro-Less | The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market. | |||
![]() | BM10-32 | 10-32 UNF male | Electro-Less | The 10-32 Fitting UNF Male allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Fits all the same cups as the 10-15 Fitting, but in a 10-32 UNF version. Comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market. | |||||
![]() | ![]() | BM5 FITTING M5 MALE Replaces 10-15 FITTING A-3107030 31.07.030 01AC | 5 mm male | Electro-Less | The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions. | ||||
– | Product Photo | Part No. | Connection | Material | Notes | ||||
![]() | A-3150196 | 5 mm female | G 1/8″ male | Black Anodized Aluminum |
| ||||
| |||||||||
![]() | STRENGTHENING A-0101084 | N/A | Silicone | The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. | |||||
![]() | A-3150141 | 5 mm female | G 1/8″ male | Black Anodized Aluminum |
| ||||
| |||||||||
![]() | A-3150163 | N/A | – | The 20-30 Filter Screen is used with 3-piece fitting for 20-30 Series cups and with the above 20-30 Connection Plate. Protects the vacuum system from incoming debris. | |||||
– | Product Photo | Part No. | Connection | Material | Notes | ||||
![]() | A-3150140 | N/A | Aluminum | The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom. | |||||
![]() | A-3150055 | N/A | Aluminum | The 30 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load. | |||||
![]() | A-3250001 | G 1/8″ female | Black Anodized Aluminum | The 40/30-2/BL30 Fitting uses a Strengthening Ring 40. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ thread. | |||||
![]() | STRENGTHENING A-0101085 | N/A | Silicone | The Strengthening Ring 40 is used with the above 40/30-2/BL30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. | |||||
– | Product Photo | Part No. | Connection | Material | Notes | ||||
![]() | A-3150056 | N/A | Aluminum | The 40 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load. | |||||
![]() | A-3150143 | G 1/8″ female | Black Anodized Aluminum | The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ thread. | |||||
![]() | A-3150164 | N/A | – | The 40 Filter Screen is used with 3-piece fitting for 40 Series suction cups and with the above 40 Connection Plate. Protects the vacuum system from incoming debris. | |||||
![]() | A-3150142 | N/A | Aluminum | The 40 Locking Spacer is used with the above 40 Connection Plate. It presses in from the bottom. | |||||
– | Product Photo | Part No. | Connection | Material | Notes | ||||
![]() | 50/50-2 FITTING | G 1/8″ female | Black Anodized Aluminum | The 50/50-2 Fitting is utilized with a Strengthening Ring 50. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ thread. | |||||
![]() | G 1/8″ male | Black Anodized Aluminum | The A-05AG-18m-G Fitting is utilized with a Strengthening Ring 50. It allows you to screw into any of the SLSA-2 Suspensions using HS18G-18F-G fitting. | ||||||
![]() | STRENGTHENING A-0101086 | N/A | Silicone | The Strengthening Ring 50 is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. | |||||
![]() | A-3150057 | N/A | Aluminum | The 50 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load. | |||||
– | Product Photo | Part No. | Connection | Material | Notes | ||||
![]() | A-3150145 | G 1/8″ female | Black Anodized Aluminum | The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ thread. | |||||
![]() | A-3150165 | N/A | – | The 50 Filter Screen is used with 3-piece fitting for 50 Series suction cups and with the above 50 Connection Plate. Protects the vacuum system from incoming debris. | |||||
![]() | A-3150144 | N/A | Aluminum | The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom. | |||||
![]() | A-3350033 | N/A | Aluminum | The 75 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load. | |||||
– | Product Photo | Part No. | Connection | Material | Notes | ||||
![]() | A-3150043 | N/A | Aluminum | The 75 Connection Plate 1/8 is to be imbedded in the 75 Series suction cup’s rubber portion allowing the 75 Fitting 1/8″ to be held in place. | |||||
![]() | A-3250006 | G 1/8″ female | Black Anodized Aluminum | The 75 Fitting 1/8″ with 1/8″ female center port connection with optional M5 (10/32) female port often used as a blow-off port. | |||||
![]() | A-3150215 | N/A | – | The 75 Filter Screen is used with 3-piece fitting for 75 Series suction cups and with the above 75 Fitting 1/8″. Protects the vacuum system from incoming debris. | |||||
![]() | A-3250007 | G 1/2″ female | Black Anodized Aluminum | The 110 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port. | |||||
|
|
| |||||||
– | Product Photo | Part No. | Material | Notes | |||||
![]() | A-3150044 | N/A | Aluminum | The 110 Connection Plate is to be imbedded in the 110 Series suction cup’s rubber portion allowing the 110 Fitting 1/2″ to be held in place. | |||||
![]() | A-3150167 | N/A | – | The 110/150 Filter Screen is used with 3-piece fitting for 110 Series suction cups with the 110 Fitting 1/2″ or 150 Series suction cups with the 150 Fitting 1/2″. Protects the vacuum system from incoming debris. | |||||
![]() | A-3350034 | N/A | Aluminum | The 110/150 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load. | |||||
![]() | A-3150045 | N/A | Aluminum | The 150 Connection Plate is to be imbedded in the 150 Series suction cup’s rubber portion allowing the 150 Fitting 1/2″ to be held in place. | |||||
![]() | A-3250008 | G 1/2″ female | Black Anodized Aluminum | The 150 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port. |
![]() | The “G” thread is also known as BSPP, commonly used world-wide for Vacuum Applications. |