ANVER Vacuum Material Handling

These are absolutely great vacuum filters for use with vacuum pumps and vacuum systems. They are 100% airtight, even after repeated element changes; you can easily see when the element needs changing; they do not corrode or rust; and the element works well even on fine dust.

These filters are used to protect valves, pumps, ejectors, etc., from dust and other harmful particles. In-line filters are designed to be serviced without removing the entire unit from the line.

You can simply remove the bowl by hand and clean or change the filter element. The transparent nylon bowl allows you to easily monitor the filter condition.

ANVER vacuum filters range in size from 1/4″ to 1-1/2″ NPT and are constructed from FDA approved black nylon. If space permits, use of the longer size bowl will require fewer element changes.

Vacuum Filters are designed for years of reliable, leak-proof use

• • FDA approved Black Nylon Body is corrosion and rust proof, and shock-proof
  • Buna-N Gasket seals the bowl to the housing
  • 70-140 micron polyethylene filter element
  • Transparent nylon bowl shows condition of filter
  • Pressure rating from full vacuum to 100 psi. Sharp pressure spikes are not recommended.

  • Maximum temperature 125° F (52° C) at 100 psi

ANVER
Part No.

A
in.
(mm)

B
in.
(mm)

C
in.
(mm)

D
in.
(mm)

Filter
area
in.²
(cm²)

Pipe
Thread
(NPT)

FLTP-1/8F

PPSF.125-X10
(PPX10RE3)]

3.1
(78.7)

2.4
(61)

1.9
(48.3)

2.0
(50.8)

4.27
(28)

1/8″
NPT
Female

FLTP-1/4M

3.1
(78.7)

2.4
(61)

1.9
(48.3)

2.0
(50.8)

4.27
(28)

1/4″
NPT
Male

FLTP-1/4F

PPSF.25-X10
(PPX10RE3)

3.1
(78.7)

2.4
(61)

1.9
(48.3)

2.0
(50.8)

4.27
(28)

1/4″
NPT
Female

FLTP-3/8M

3.1
(78.7)

2.4
(61)

1.9
(48.3)

2.0
(50.8)

4.27
(28)

3/8″
NPT
Male

FLTP-3/8FS

PPSF.375-X10
(PPX10RE3)

3.1
(78.7)

2.4
(61)

1.9
(48.3)

2.0
(50.8)

4.27
(28)

3/8″
NPT
Female

FLTP-3/8F

3.6
(91.4)

5.1
(129.5)

2.9
(73.6)

4.4
(111.8)

19
(123)

3/8″
NPT
Female

FLTP-1/2F

PPSF.5-X35
(PPX35RE3)

3.6
(91.4)

5.1
(129.5)

2.9
(73.6)

4.4
(111.8)

19
(123)

1/2″
NPT
Female

FLTPE-2
White
  70-140
micron

3.6
(91.4)

5.1
(129.5)

2.9
(73.6)

4.4
(111.8)

19
(123)

1/2″
NPT
Female

FLTP-3/4F

PPSF.75-X35
(PPX35RE3)

3.6
(91.4)

5.4
(137.2)

2.9
(73.6)

4.6
(116.9)

19
(123)

3/4″
NPT
Female

FLTP-1F

PPSF1.0-X50
PPX50RE3

4.9
(124.5)

6.4
(162.6)

4.0
(101.6)

5.6
(142.2)

33
(213)

1″
NPT
Female

FLTP-1F/15

4.9
(124.5)

6.4
(162.6)

4.0
(101.6)

5.6
(142.2)

33
(213)

1″
NPT
Female

FLTP-1.5F/15

5.2
(132.1)

8.1
(209.9)

4.0
(101.6)

6.9
(175.3)

39
(252)

1-1/2″
NPT
Female

Replacement of Filter Elements takes only a few seconds.
All filter elements can be easily cleaned or replaced by hand without removing the entire filter from the line by simply removing the filter bowl. Simply unscrew the bowl by hand. No tools are needed.