Vacuum Pumps and Vacuum Generators
Air Mover Style Vacuum Pumps
FT Series Adjustable Flow Tubes and Transfer Tubes
-
Product Photo
(Click to Enlarge)Model
NumberBore ID
in.
(mm)Air
Usage*
SCFM
(l/min.)Output*
SCFM
(l/min)Max. Vac.
in. Hg
(mm Hg)Amp-
lification
RatioA
in.
(mm)B
Barb
in.
(mm)C
Approx.
in.
(mm)D
in.
(mm)E
Inlet
PortF
Barb
in.
(mm)G
in.
(mm)(CDF200H
KVPCOF200H)0.25
(6.3)3
(85)18
(340)5
(127)6:1
1.32
(33.4)0.53
(13.5)3.75
(95.3)2.10
(53.5)G 1/8″ 1.00
(25.4)0.94
(24.0)FT050 **
(CDF500H
KVPCOF500H)0.50
(12.7)9
(255)75
(2124)3
(76)8:1
1.90
(49.0)1.00
(25.4)4.50
(114.5)2.13
(54.0)G 1/4″ 1.50
(38.1)0.94
(24.0)(CDF750H
KVPCOF750H)0.75
(19.1)9
(255)110
(3115)1.5
(38)12:1
2.38
(60.4)1.25
(31.8)4.97
(126.0)2.63
(66.7)G 1/4″ 2.00
(52.0)0.94
(24.0)(CDF1000H
KVPCOF1000H)1.00
(25.4)9
(255)145
(4106)1
(25)16:1 2.38
(60.4)1.50
(38.1)4.97
(126.0)2.53
(64.1)G 1/4″ 2.00
(52.0)0.94
(24.0) -
Product Photo
(Click to Enlarge)Model
Number(B)
Optional
Hose to Fit Exhaust Barb(E)
Optional
G to NPT
Inlet Port Adapter(F)
Optional
Hose to Fit Incoming BarbOptional Clamp
Mount(CDF200H
KVPCOF200H)FT050 **
(CDF500H
CD500H
KVPCOF500H)(CDF750H
KVPCOF750H)(CDF1000H
KVPCOF1000H)
* Air usage and output are based on an input pressure of 80 PSIG.
** Note: Optional CLAMP51P requires tape wrap to fit tightly on FT050.
13600162 A
Air Movers: TT Series Material Transfer Tubes
The TT Series Transfer Tubes offer a simple, effective, and low cost solution to perform an inline transfer of small or complex shaped objects, bulk material, and powders. Highly efficient and compact, the TT Series creates an instantaneous and adjustable vacuum flow that is powered by compressed air. The straight-through, smooth bore design allows material to pass directly through the pump at high speeds without clogging. These transfer tubes are made of anodized aluminum and are available in 4 standard models with inside diameters from 3/8″ (9.5mm) to 1″ (25.4mm). |
|
|
Applications
|
|
|
-
Product Photo
(Click to Enlarge)Model
NumberBore ID
in.
(mm)Air
Usage*
SCFM (l/min)Output* SCFM
(l/min)Max.
Vacuum
in. Hg
(mm Hg)Velocity ft/sec
(m/sec)A
in.
(mm)B
Barb
in.
(mm)C
in.
(mm)D
in.
(mm)E
Inlet
PortTT03 (DF3-3 D3-3
KVPDF3-3)0.375
(9.5)10
(283)15
(425)6
(152)395
(120)1.25
(31.8)0.75
(19.1)3.75
(95.3)0.50
(12.7)G 1/8″
TT05 (DF5-6 D5-6
KVPDF5-6)0.500
(12.7)24
(680)30
(850)6
(152)360
(110)1.50
(38.1)1.00
(25.4)5.75
(146.1)0.63
(15.9)G 1/4″
TT07 (DF7-6 D7-6
KVPDF7-6)0.750
(19.1)48
(1359)60
(1699)8
(203)325
(99)2.00
(50.8)1.25
(31.8)8.00
(203.2)1.00
(25.4)G 1/4″
TT10 (DF10-3 D10-3
KVPDF10-3)1.00
(25.4)48
(1359)95
(2690)6
(152)290
(88)2.25
(57.2)1.50
(38.1)8.00
(203.21.00
(25.4)G 1/4″
-
Product Photo
(Click to Enlarge)Model
NumberOptional
Hose to Fit Both BarbsOptional
G to NPT
Inlet Port AdapterOptional Clamp
MountTT03 (DF3-3 D3-3
KVPDF3-3)TT05 (DF5-6 D5-6
KVPDF5-6)TT07 (DF7-6 D7-6
KVPDF7-6)TT10 (DF10-3 D10-3
KVPDF10-3)
* Air usage and Output are based on an input pressure of 80 PSIG.
13600163 A
The “G” thread is also known as BSPP, commonly used world-wide for vacuum applications.