Vacuum Lifting System Pad Attachments
Round Vacuum Pad Attachments with Replaceable Seals

T-Series: For multi-pad use, T-Series pad attachments can be configured inline or with crossarms on a spreader beam. T1-Series: For single pad use. T1-Series pad attachments are equipped with a quick release mount. The control head must have a VT-QRT-M or -S in order to use a single pad. T1-4P-Series: For single pad use. T1-4P-Series pad attachments are equipped with a rugged aluminum quick release. The control head must have VT-QRT-M-4P or -S-4P in order to use a single pad. T-Series pads attach to aluminum beam for adjustable width. Larger NPT ports allow for maximum airflow. Beam assembly can be paired with quick release for highest efficiency.

 

ANVER offers a variety of vacuum pad attachments that are designed for high-flow flat surface applications. There are two basic configurations for most pad attachments: the TSeries and T1-Series (see photos below). The total vacuum pad area to a tube cross-section area ratio must be at least 2:1 as it is crucial to lift safety. Suitable tube-topad attachment area-ratios that satisfy this safety requirement are listed in the table below. See page 2 for the minimum number of pads required for each VT Tube Lifting
System.

Note: When attaching to the side of the load, these areas must be doubled for a 4:1 ratio for grip and safety.

 

Features

  • Seals made from proprietary Nitrile blend to provide highest performance and longest durability – Tapered edge attaches easily
  • Hand-replaceable SSR(Series) Seals can be changed in minutes with no tools required
  • Quick-Disconnect Attachments make it easy to change pads for load handling versatility
  • Ideal for Lifting Boxes, Wood Panels as well as other Flat Semi-Porous loads
  • Rugged Extruded Aluminum Spreader Beams make Pad Adjustments Easier
  • A Variety of mounting styles are available to adapt to any vacuum lifting system

 

Standard Round Vacuum Pad Attachments with Quick Disconnects

 Pad
Number

Replaceable Seal
  Number
 NPT Port Size Hose Barb Part
Number		 Hose
I.D.		 Hose Part No. Hose Clamp Part No.
T-Series T1-Series
T-040100P
SSR-3510P SSR-3510P 3/4” PHB34X114 1.25” PHP34 PHP34

T-040120P
SSR-3512P SSR-3512P 3/4” PHB34X114 1.25” PHP34 PHP34
T-050105P
SSR-45105P SSR-45105P 1″ PHB1X114 1.25” PHP1 PHP1
T-050150P
SSR-4515P SSR-4515P 1″ PHB1X114 1.25” PHP1 PHP1
T-040100P
SSR-3510P SSR-3510P 3/4” PHB34X114 1.25” PHP34 PHP34

T-040120P
SSR-3512P SSR-3512P 3/4” PHB34X114 1.25” PHP34 PHP34
T-050105P
SSR-45105P SSR-45105P 1″ PHB1X114 1.25” PHP1 PHP1
T-050150P
SSR-4515P SSR-4515P 1″ PHB1X114 1.25” PHP1 PHP1
T-040100P
SSR-3510P SSR-3510P 3/4” PHB34X114 1.25” PHP34 PHP34

T-040120P
SSR-3512P SSR-3512P 3/4” PHB34X114 1.25” PHP34 PHP34
T-050105P
SSR-45105P SSR-45105P 1″ PHB1X114 1.25” PHP1 PHP1
T-050150P
SSR-4515P SSR-4515P 1″ PHB1X114 1.25” PHP1 PHP1

 

Lifting
Systems		 Tube Area
[Sq in (Sq cm)]		 Minimum
Pad Area
[Sq in (Sq cm)]
VT090 10 (65) 20 (129)
VT100 12 (77) 24 (155)
VT120 18 (116) 35 (226)
VT140 24 (155) 48 (310)
VT160 31 (200) 62 (400)
VT180 39 (252) 79 (510)
VT200 49 (316) 97 (626)
VT230 64 (413) 128 (826)
VT250 76 (490) 152 (981)
VT300 114 (736) 228 (1471)

 

Can Be Used With ANVER Vacuum Tube Lifter Model:
(Control heads are shown with handlebars which must be ordered separately)

Pad
Number		 Flared Diameter
Dimensions
W x L
[in (cm)]		 Seal Area
[Sq in. (Sq cm)]		 Minimum Number of Pads Required
Mini Control Heads
T-56-NBR 5.56 (141) 13.6 (88) 2 2 3 4
T-62-NBR 6 (152) 18.7 (121) 2 2 2 3
T-66-NBR 6.63 (168) 18.7 (121) 2 2 2 3
T-72-NBR 7 (178) 27.1 (175) 1 1 2 2
T-76-NBR 7.75 (197) 27.1 (175) 1 1 2 2
T-82-NBR 8 (203) 37.3 (241) 1 1 1 2
T-86-NBR 8.81 (224) 37.3 (241)  1  1 1   2
T-92-NBR 9.13 (232) 46.7 (301)  1  1  1  2
T-96-NBR 10 10 (254) 46.7 (301)  1  1  1  2
T-122-NBR 12 (305) 84.8 (547)  1  1  1  1
T-126-NBR 12.6 (320) 84.8 (547)  1  1  1  1
T-146-NBR 15 (381) 127.3 (821)  1 1   1 1 
Pad
Number		 Flared
Dimensions
W x L
[in (cm)]		 Seal Area
[Sq in. (Sq cm)]		 Minimum Number of Pads Required
Standard Control Heads
T-56-NBR 5.56 (141) 13.6 (88)          
T-62-NBR 6 (152) 18.7 (121) 4        
T-66-NBR 6.63 (168) 18.7 (121) 4        
T-72-NBR 7 (178) 27.1 (175) 3 3 4    
T-76-NBR 7.75 (197) 27.1 (175) 3 3 4    
T-82-NBR 8 (203) 37.3 (241) 2 3 3 4  
T-86-NBR 8.81 (224) 37.3 (241) 2 3 3 4  
T-92-NBR 9.13 (232) 46.7 (301) 2 2 3 3 4
T-96-NBR 10 10 (254) 46.7 (301) 2 2 3 3 4
T-122-NBR 12 (305) 84.8 (547) 1 1 2 2 2
T-126-NBR 12.6 (320) 84.8 (547) 1 1 2 2 2
T-146-NBR 15 (381) 127.3 (821) 1 1 1 1 2

Pad
Number		 Pad Dimension
A
in. (mm)		 w/ Quick
Release
Top
in. (mm)
T-56-NBR 7.1 (180) N/A
T-62-NBR 6.9 (175) N/A
T-66-NBR 7.2 (183) N/A
T-72-NBR 4.9 (124) N/A
T-76-NBR 5.2 (132) N/A
T1-76-NBR 2.8 (71)* 4.1 (104)
T1-76-NBR-4P-M 1.3 (33)* 3.3 (84)
T-82-NBR 5.1 (130) N/A
T-86-NBR 5.3 (135) N/A
T1-86-NBR 2.8 (71)* 4.1 (104)
T1-86-NBR-4P-M 1.4 (36)* 3.4 (86)
T-92-NBR 5.4 (137) N/A
T-96-NBR 5.4 (137) N/A
T1-96-NBR 2.9 (74)* 4.2 (107)
T1-96-NBR-4P-M 1.5 (38)* 3.5 (89)
T-122-NBR 5.3 (135) N/A
T-126-NBR 5.3 (135) N/A
T-126-NBR-HD 5.4 (137) N/A
T1-126-NBR 3.0 (76)* 4.3 (109)
T1-126-NBR-4P-S 2.4 (61)* 4.9 (124)
T-146-NBR 5.2 (132) N/A
T1-146Q-NBR 2.8 (71)* 4.1 (104)
T1-146-NBR-4P-S 2.2 (56)* 4.7 (119)

Note: *For T1 pads use dimension “A” plus corresponding quick release top headroom for total headroom.

Click Here to See More Details of Different Suction Cup and Vacuum Cup Materials 

Replacement Bottom Swivel and Universal Swivel Assemblies for All Brands of Vacuum Tube Lifters
Bottom and Universal Swivel Assemblies
Allows the attached load to be precisely spun into position while keeping the control head in front of the operator.
Replacement Quick Disconnects Assemblies for All Brands of Vacuum Tube Lifters
Quick Disconnects and Extensions
Allow quick change of pad attachments for varying load handling requirements. Quick Release extensions extend the reach of the lifter.

13600274