GF-Series Heavy Duty Electric Powered Vacuum Generator Lifting Frames
10 Ton (9072 kg)

The GF Series generators incorporate the latest in sophisticated lifting technology for the handling industry, increasing speed, productivity and efficiency. Available in electric and battery powered. Vac-Packs can be replaced in minutes to minimize downtime in case of service. The GF-Series speeds production due to a large reservoir allowing the lifter to attach almost instantly, decreasing attach time. The large reservoir not only increases efficiency but also increases safety in the case of power failure due to the vacuum that remains in the system.

Your choice of FOUR control styles to suit your application:

Standard Controls

Click for Video

Electric Self-Cycling Attach/Release
Instant attach/release is provided via the hoist up and down movement. The attach and release alternate each lift cycle for fast, efficient handling. Similar to our line of Mechanical Generators. Click here to find out more about Electric Self-Cycling.

Features:

  • No Pendant or Radio Controls Required for Attach/Release.
  • Extremely Safe. Load cannot be released until it is set down on a surface.
  • Simple to operate.
Optional Controls

Radio Controlled 3 Button Attach / Release / Interlock Transmitter with Plug-In Receiver
Hand held device with attach, release and safety interlock push buttons with holster mounted on front handlebar. Plug-in receiver is mounted on side of vacuum generator.  Contact Factory for more information.

Includes:

  • Radio Control Transmitter and Mounting Holster
  • Radio Control Receiver and Mounting Bracket

Plug-In Attach / Release / Interlock Control Pendant
Attach/Release momentary switch and safety interlock push-button located on control pendant with 10ft long coiled cord.

Includes:

  • Pendant Control and Mounting Holster
  • Plug-In, Replaceable Coil Cord, 10 ft. long.

Plug-In Harness, Customer Radio Receiver Interface
 Control Harness allows you to wire your own radio receiver for integration of Attach / Release / Interlock.

Includes:

  • Cord, 3 ft. long.


Generator shown with ESC Electric Self-Cycling Control

 

Anver_Air_Saver_Tag

Features:

  • State-of-the-art Vacuum Control which minimizes vacuum pump use greatly increasing number of hours between servicing.
  • Dual redundancy safety Lock-out Lifting Bail that requires operator to first set the unit down before they release the load.
  • Front Control Panel and Gauges
  • Indicator Lights
  • Vacuum Retention
  • Thermal Overload Protection
  • Ergonomic Adjustable Front Handlebar
  • Audible Vacuum Leakage Warning System

For Electrical Power Requirements refer to individual vacuum generator series pages (see table below).

NOTE: Maximum lifter capacity and lifter weight combined can not exceed 22,500 LB (10,205 KG

Request For Quote
Generator Series Model No.GF10TB10-17GF10T3GF10T24GF10T48GF10T75
Vacuum Generator SeriesBAE10-17VPE3-GEN2VPEHE24VPEHE48VPEHE75
Motor [HP]12x 3/41.535
Vacuum Pump [SCFM]172x 8245078
Unit Weight [lb (kg)]978 (444)837 (380)730 (332)932 (423)1050 (477)
Vacuum Level at Sea Level [in. Hg (mmHg)]2424242424
Reservoir Size [Gallon (L)]30 (114)33 (126)30 (114)30 (114)30 (114)
Energy Saver / Quiet Automatic Shut-OffYESYESYESYESYES
Optional Controls
Product
Photo
Part
Number
Description
RCPK-ARI

Radio Control Kit for Vac-Packs, Attach/Release/Interlock

Kit Includes:

  • Radio Control Transmitter and Mounting Holster
  • Radio Control Receiver and Mounting Bracket
EPK-AC/DC-ARI

Pendant Control Kit for Vac-Packs, Attach/Release/Interlock

Kit Includes:

  • Pendant Control and Mounting Holster
  • Plug-In, Replaceable Coil Cord, 10 ft. long.
34000332

Plug-In Harness, Customer Radio Receiver Interface

Kit Includes:

  • Cord, 3 ft. long.
Recommended Spare Parts
Product
Photo
Part
Number
   Description
UB-125-R    Utility Bar Assembly for 1.25″ Dia. Handlebars (VPE3-GEN3 / BAE3-GEN3 / GF Series)
21301186    Radio Control Transmitter Holster Assembly, Bolt-on for Utility Bar (Mounting Hardware Included)
21301187    Pendant Mounting Bracket Assembly, Bolt-on for Utility Bar (Mounting Hardware Included)
RCT-PCLIP    Plastic Belt Clip for RCT Transmitter
RCT-MCLIP    Metal Belt Clip for RCT Transmitter
RCT-SCREW    Belt Clip Screw for RCT Transmitter
RCT-NYLONCOVER    Protective Nylon Cover for RCT Transmitter

13600119

back-generators lifters-back