AMC-Series Vacuum Lifters with Manual 90° Tilt and 360° Manual Rotation
Compressed Air Powered Four Pad Lifters – Capacity from 500 lb (227 kg) to 700 lb (317 kg)

EMC-Glass-Tilter2
EMC-Glass-Tilter1
AMC50M4-EXT
AMC50M4-noEXT
AMC50M4-Inline
AMC70M4-EXT
AMC70M4-noEXT
AMC70M4-Inline
previous arrow
next arrow
EMC-Glass-Tilter2
EMC-Glass-Tilter1
AMC50M4-EXT
AMC50M4-noEXT
AMC50M4-Inline
AMC70M4-EXT
AMC70M4-noEXT
AMC70M4-Inline

Anver Vacuum Manual Tilters and Upenders are loaded with safety features and have come to set the standard for safe tilting of loads. Each version has been revised over the years to perform better and last longer. The pads, vacuum generators, frame, controls, hardware, filters, safety features and handlebars etc are all new and improved. Every aspect of the lifters has been redesigned and the latest represent the best Tilters available.

The standard AMC-Series Compressed Air Powered Vacuum Lifters are designed to significantly reduce the effort of upending heavy loads while providing powerful suction force and 90 degree manual tilt and 360 degree manual rotation capability.

Built with safety in mind, these lifters/tilters are loaded with protective features including: a VLS, 9V battery powered vacuum leakage sensor and warning system; an attach/release slide valve with safety lock. The AMC-Series Lifters/Tilters are capacity rated at a maximum vacuum level of 24 in. Hg (609.6 mm Hg) with a 4:1 safety factor on vacuum holding (unless otherwise specified).

AMC-Series lifters come equipped with removeable pad extensions. The vacuum pads can be mounted inline for handling long and narrow loads or without the extensions for handling short and narrow loads. Constructed with an ergonomic lifter handlebar and a welded steel lifting frame, operators can use this equipment with ease and comfort for a wide range of loads and applications.

*Load weight and depth affect the final angle that the lifter achieves. Consult ANVER for loads thicker than 1.18 in. (3cm) due to center of gravity offset.

Compressed Air Powered Specifications

Request For Quote
Lifter ModelAMC50M4-46E-MTRAMC70M4-46E-MTR
Rated Load Capacity [lbs (kg.)]500 (227)700 (317)
Unit Weight [lbs (kg.)]225 (102)265 (121)
Incoming Power Requirement [psi]9090
A Lifter Headroom w/ Extensions [in. (mm)]84 (2134)86 (2185)
B Pad Distances w/ Extensions [in. (mm)]47 (1194)50 (1270)
C Pad Distances w/ Extensions [in. (mm)]65 (1651)69 (1753)
D Vertical Lifter Depth [in. (mm)]32 (813)32 (813)
E Pad Size [in. (mm)]9.13 (232)12 (305)
F Pad Distances, Inline [in. (mm)]14 (356)17 (432)
G Pad Distances, Inline [in. (mm)]76 (1931)80 (2032)
H Pad Distances w/o Extensions [in. (mm)]27 (686)30 (762)
J Pad Distances w/o Extensions [in. (mm)]31 (788)34 (864)
K Lifter Headroom w/o Extensions [in. (mm)]64 (1646)66 (1677)
Maximum Plate Dimensions [ft. (M)]10 x 5 (3.0 x 1.5)10 x 5 (3.0 x 1.5)
Pad NumberVP92VP122

13600178 A

EMC-Series Vacuum Lifters with Manual 90° Tilt and 360° Manual Rotation
Electric Powered Four Pad Lifters – Capacity from 500 lb (227 kg) to 700 lb (317 kg)

EMC70M4-46E-MTR
EMC50M4-EXT
EMC50M4-noEXT
EMC50M4-Inline
EMC70M4-EXT
EMC70M4-noEXT
EMC70M4-Inline
previous arrow
next arrow
EMC70M4-46E-MTR
EMC50M4-EXT
EMC50M4-noEXT
EMC50M4-Inline
EMC70M4-EXT
EMC70M4-noEXT
EMC70M4-Inline

Anver Vacuum Manual Tilters and Upenders are loaded with safety features and have come to set the standard for safe tilting of loads. Each version has been revised over the years to perform better and last longer. The pads, vacuum generators, frame, controls, hardware, filters, safety features and handlebars etc are all new and improved. Every aspect of the lifters has been redesigned and the latest represent the best Tilters available.

The standard EMC-Series Electric Powered Vacuum Lifters are designed to significantly reduce the effort of upending heavy loads while providing powerful suction force and 90 degree manual tilt and 360 degree manual rotation capability.

Built with safety in mind, these lifters/tilters are loaded with protective features including: a VLS, 9V battery powered vacuum leakage sensor and warning system; an attach/release slide valve with safety lock. The EMC-Series Lifters/Tilters are capacity rated at a maximum vacuum level of 24 in. Hg (609.6 mm Hg) with a 4:1 safety factor on vacuum holding (unless otherwise specified).

EMC-Series lifters come equipped with removeable pad extensions. The vacuum pads can be mounted inline for handling long and narrow loads or without the extensions for handling short and narrow loads. Constructed with an ergonomic lifter handlebar and a welded steel lifting frame, operators can use this equipment with ease and comfort for a wide range of loads and applications.

*Load weight and depth affect the final angle that the lifter achieves. Consult ANVER for loads thicker than 1.18 in. (3cm) due to center of gravity offset.

Electric Powered Specifications

Request For Quote
Lifter ModelEMC50M4-46E-MTREMC70M4-46E-MTR
Rated Load Capacity [lbs (kg.)]500 (227)700 (317)
Unit Weight [lbs (kg.)]235 (107)275 (125)
Incoming Power Requirement [AC]115V/1PH/60Hz
6 Amps
115V/1PH/60Hz
6 Amps
A Lifter Headroom w/ Extensions [in. (mm)]84 (2134)86 (2185)
B Pad Distances w/ Extensions [in. (mm)]47 (1194)50 (1270)
C Pad Distances w/ Extensions [in. (mm)]65 (1651)69 (1753)
D Vertical Lifter Depth [in. (mm)]32 (813)32 (813)
E Pad Size [in. (mm)]9.13 (232)12 (305)
F Pad Distances, Inline [in. (mm)]14 (356)17 (432)
G Pad Distances, Inline [in. (mm)]76 (1931)80 (2032)
H Pad Distances w/o Extensions [in. (mm)]27 (686)30 (762)
J Pad Distances w/o Extensions [in. (mm)]31 (788)34 (864)
K Lifter Headroom w/o Extensions [in. (mm)]64 (1646)66 (1677)
Maximum Plate Dimensions [ft. (M)]10 x 5 (3.0 x 1.5)10 x 5 (3.0 x 1.5)
Pad NumberVP92VP122

13600179 A

BMC-Series Vacuum Lifters with Manual 90° Tilt and 360° Manual Rotation
Battery Powered Four Pad Lifters – Capacity from 500 lb (227 kg) to 700 lb (317 kg)

BMC50M4-EXT
BMC50M4-noEXT
BMC50M4-Inline
BMC70M4-EXT
BMC70M4-noEXT
BMC70M4-Inline
previous arrow
next arrow
BMC50M4-EXT
BMC50M4-noEXT
BMC50M4-Inline
BMC70M4-EXT
BMC70M4-noEXT
BMC70M4-Inline

Anver Vacuum Manual Tilters and Upenders are loaded with safety features and have come to set the standard for safe tilting of loads. Each version has been revised over the years to perform better and last longer. The pads, vacuum generators, frame, controls, hardware, filters, safety features and handlebars etc are all new and improved. Every aspect of the lifters has been redesigned and the latest represent the best Tilters available.

The standard BMC-Series Battery Powered Vacuum Lifters are designed to significantly reduce the effort of upending heavy loads while providing powerful suction force and 90 degree manual tilt and 360 degree manual rotation capability.

Built with safety in mind, these lifters/tilters are loaded with protective features including: a VLS, 9V battery powered vacuum leakage sensor and warning system; an attach/release slide valve with safety lock. The BMC-Series Lifters/Tilters are capacity rated at a maximum vacuum level of 24 in. Hg (609.6 mm Hg) with a 4:1 safety factor on vacuum holding (unless otherwise specified).

BMC-Series lifters come equipped with removeable pad extensions. The vacuum pads can be mounted inline for handling long and narrow loads or without the extensions for handling short and narrow loads. Constructed with an ergonomic lifter handlebar and a welded steel lifting frame, operators can use this equipment with ease and comfort for a wide range of loads and applications.

*Load weight and depth affect the final angle that the lifter achieves. Consult ANVER for loads thicker than 1.18 in. (3cm) due to center of gravity offset.

Battery Powered Specifications

Request For Quote
Lifter ModelBMC50M4-46E-MTRBMC70M4-46E-MTR
Rated Load Capacity [lbs (kg.)]500 (227)700 (317)
Unit Weight [lbs (kg.)]245 (112)285 (130)
DC Generator Battery Power12V DC, 12 Amp Hours12V DC, 12 Amp Hours
A Lifter Headroom w/ Extensions [in. (mm)]84 (2134)86 (2185)
B Pad Distances w/ Extensions [in. (mm)]47 (1194)50 (1270)
C Pad Distances w/ Extensions [in. (mm)]65 (1651)69 (1753)
D Vertical Lifter Depth [in. (mm)]32 (813)32 (813)
E Pad Size [in. (mm)]9.13 (232)12 (305)
F Pad Distances, Inline [in. (mm)]14 (356)17 (432)
G Pad Distances, Inline [in. (mm)]76 (1931)80 (2032)
H Pad Distances w/o Extensions [in. (mm)]27 (686)30 (762)
J Pad Distances w/o Extensions [in. (mm)]31 (788)34 (864)
K Lifter Headroom w/o Extensions [in. (mm)]64 (1646)66 (1677)
Maximum Plate Dimensions [ft. (M)]10 x 5 (3.0 x 1.5)10 x 5 (3.0 x 1.5)
Pad NumberVP92VP122

13600180 A

Powered Vacuum Lifters

with Manual Tilting for One-Person Load Manipulation


90° Manual Tilt
Click for Chart

ANVER offers electric and air powered vacuum lifters with manual 90 degree tilting capabilities for easy one-person manipulation, and available in lifting capacities up to 60,000 lb (26,600 kg) or more depending on your application needs.

ANVER is ready to assist you in choosing a vacuum lifter that will meet all of material handling needs. Contact ANVER for more information, or fill out a Lifter Info/Quote Request Form and a Sales Engineer will respond to your request shortly.

Click on the photos below for more information about vacuum tilters. 

Powered Vacuum Lifters with Manual Tilt and Rotate

A15M4-MR-GT-SP

A25M2-42-MUPR

E25M2-60MUP/R

A25M6-36/44V-MUPR

E100M4-CG

AV50M4-48X28MR
Electric Powered Vacuum Lifters with Manual Tilt

E25M2-48MUP

E25M4-48-2/33AMUP

E50M2-50MU-FX

E50M4-40X30FMUP

GT90M6-88E

GT150M6-63E

E300M3-68-FPFXGT
Air Powered Vacuum Lifters with Manual Tilt

A8M2-VF-GT

A25M2-30VF-MUP

A25M2-30VF-MUP

A50M4-61-2/44MUP

Installation General Information Safety
Support/Service Options and Accessories Request for Quote