Four Pad Vacuum Lifter Lifting Frames
For Standard Four Pad Lifters – Capacity up to 11200 lb (5080 kg)

LG1120M4
LG1120M4

ANVER’S standard lifting frames are built to order using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms and vacuum cups selected.

ANVER Vacuum Lifters comply fully with and meet the standards of US ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as complying with OSHA and most European requirements.

The LG1120M4-Series four-pad lifting frames are ideal for handling carbon steel and stainless steel sheets, plates and non-ferrous materials like aluminum with a capacity up to 11200 lb (5080 kg). The type of vacuum lifter – Mechanical, Electric or Battery – paired with the number of pads used will depend on your application needs.

Lifting frame shown with vacuum generator and/or optional accessories, which are sold separately. Unit weight does not include vacuum generator or optional equipment (Parking Stands, etc). To calculate total unit weight, add the compatible generator weight to the lifting frame weight and deduct it from crane capacity.
Features
  • Fully welded rigid frame makes the load handling stable via a high hook point. Reinforcement bracing provided on longer length lifting beams.
  • The GF-Frame includes a main vacuum reservoir as a primary with a secondary reservoir running the entire length of the spreader beam. Resulting in near instant attach time, maximizing productivity.
  • Front handlebar and end of beam tag line loops provided to facilitate maneuvering.
  • Quad mounted vacuum pads feature top & bottom springs to handle wavy plate.
  • Bolt-on sealing rings feature rugged seals that can be replaced easily. This can be done in minutes with the lifter resting on its parking stands (Sold Separately).
  • Standard modular construction allows quick service and/or replacement of Vac-Packs, as needed to minimize downtime.
Compatible Vacuum Generators
Electric or Battery**
GF10T_500x458
GF10T-Series
Request For Quote
Lifting Frame NumberLG1120M4-162LG1120M4-198LG1120M4-243LG1120M4-288
Rated Load Capacity [lbs (kg)]11200 (5080)11200 (5080)11200 (5080)11200 (5080)
Approximate Unit Weight [lbs (kg)]1294 (587)1450 (658)2250 (1021)2900 (1316)
A Lifting Frame Headroom [in. (mm)]60 (1527)60 (1527)60 (1527)60 (1527)
B Spreader Beam Length [in. (mm)]162 (4115)198 (5029)243 (6172)288 (7315)
C Outer Pad Centers Maximum [in. (mm)]144 (3658)180 (4572)225 (5715)270 (6858)
C Outer Pad Centers Minimum [in. (mm)]96 (2439)120 (3048)150 (3810)180 (4572)
D Pad Size [in. (mm)]21 x 29.75
(533 x 756)		21 x 29.75
(533 x 756)		21 x 29.75
(533 x 756)		21 x 29.75
(533 x 756)
Maximum Load Size [ft (M)]16 x 6 (4.8 x 1.8)20 x 6 (6.1 x 1.8)25 x 6 (7.6 x 1.8)30 x 6 (9.1 x 1.8)
*Minimum Load Size [in. (mm)]45 x 31
(1143 x 788)		45 x 31
(1143 x 788)		45 x 31
(1143 x 788)		45 x 31
(1143 x 788)
Minimum Load Thickness at
Maximum Length & Width [in. (mm)]		11 ga. (3)11 ga. (3)11 ga. (3).188 (5)
Vacuum Pad NumberVP2129QVP2129QVP2129QVP2129Q
Optional Parking StandsPST30-31-21PST30-31-21PST30-31-21PST30-31-21

*Minimum Load Sizes are with outer vacuum pads shut-off. (1/2 rated load) Load capacities at 24 in. Hg, Sea Level.

**Battery powered vacuum generators are only recommended when handling non-porous loads.

13600138 A

Various plate sizes can be handled by adjusting the vacuum pad positions on the beam

Vacuum pads in maximum position to handle maximum plate size.
Vacuum pads moved inwards to handle minimum plate size.
Center vacuum pads (1/2 capacity) used for short, narrow plates. Outer pads provided with shut-off valves.

Installation General Information Safety
Support/Service Options and Accessories Request for Quote