Four Pad WT-Series Vacuum Lifter Lifting Frames
For Standard Four Pad Lifters – Capacity up to 1000 lb (454 kg)

previous arrow
next arrow
Slider

ANVER’S Standard Vacuum Lifters offer efficient material handling solutions by promoting functionality, safety, and ergonomic operations for a wide variety of applications and materials. Standard lifting frames are built to order from stock using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms, and vacuum cups selected.

Basic features on ANVER’s Standard Horizontal Vacuum Lifters include: vacuum leakage sensor and warning system; attach/release slide valve with safety lock; and locking hand knobs on the adjustable vacuum pad, slide assemblies, and crossarms (when applicable).

ANVER Vacuum Lifters comply fully with and meet the standards of US ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as complying with OSHA and most European requirements.

This model works well for skin covered, insulated panels. It allows a smaller lifting frame to handle up to 20 FT. (6.1 M) loads (if thick enough) with a shorter (112 in. (2845mm) main beam. This unit can be shipped in one of our premade export shipping boxes for no extra charge. The type of vacuum lifter – Mechanical, Air, or Electric – paired with the number of pads used will depend on your application needs. Foam pads are not available for mechanical vacuum generators.

Contact ANVER for more information, or fill out a Lifter Info/Quote Request Form and a Sales Engineer will respond to your request shortly.

*Lifting frame shown with vacuum generator and/or optional accessories, not included. Unit weight does not include optional equipment.

Standard Rubber Seal Lifting Frames Specifications
Compatible Vacuum Generators
Air or Electric Air, Electric or Battery* Electric Battery*
VPFL4-AIR_190x83 VPF-57-AIR_190x129 VPE1-GEN2_190x275 BAE1-GEN2_190x213
VPFL4-Series VPF-57-Series VPE1-GEN2-Series BAE1-GEN2-Series
Request For Quote
Lifting Frame NumberL100M4-110WT
Rated Load Capacity [lbs (kg)]1000 (454)
Unit Weight [lbs (kg)]150 (69)
A Pad Diameter [in. (mm)]9.25 (235)
B Lifting Frame Headroom [in. (mm)]9 (229)
C Beam Length [in. (mm)]112 (2845)
D Hardware Mounting Centers [in. (mm)]9 (229)
E Crossarm Length [in. (mm)]27 (686)
F Outer Pad Distances Maximum [in. (mm)]136 (3455)
F Outer Pad Distances Minimum [in. (mm)]69 (1753)
G Pad Distance Along Crossarm [in. (mm)]34 (864)
Maximum Load Size [ft. (M)]20 x 3 (6.1 x 0.9)
Seal NumberSSR-90
Standard Foam Seal Lifting Frames Specifications

Note: Foam pads are available for air and electrical powered vacuum generators only.

Compatible Vacuum Generators
Air or Electric Air, Electric or Battery* Electric Battery*
VPFL4-AIR_190x83 VPF-57-AIR_190x129 VPE1-GEN2_190x275 BAE1-GEN2_190x213
VPFL4-Series VPF-57-Series VPE1-GEN2-Series BAE1-GEN2-Series
Request For Quote
Lifting Frame NumberL100M4-110FP-WT
Rated Load Capacity [lbs (kg)]1000 (454)
Unit Weight [lbs (kg)]150 (69)
A Pad Diameter [in. (mm)]12.00 (305)
B Lifting Frame Headroom [in. (mm)]10 (254)
C Beam Length [in. (mm)]112 (2845)
D Hardware Mounting Centers [in. (mm)]9 (229)
E Crossarm Length [in. (mm)]27 (686)
F Outer Pad Distances Maximum [in. (mm)]138 (3505)
F Outer Pad Distances Minimum [in. (mm)]70 (1778)
G Pad Distance Along Crossarm [in. (mm)]36 (915)
Maximum Load Size [ft. (M)]20 x 3 (6.1 x 0.9)
Seal NumberFR128

*Battery powered vacuum generators are only recommended when handling non-porous loads.

Installation General Information Safety
Service Optional Equipment  
 
 
 

13600176 A