Two Pad Vacuum Lifter Lifting Frames
For Standard
Two Pad Lifters – Capacity up to 4600 lb (2086 kg)

VPF-57HD-AC-L460M2-86
VPF-57HD-DCP-L460M2-86
L460M2-86
vpe3-s-l460m2-86
previous arrow
next arrow
VPF-57HD-AC-L460M2-86
VPF-57HD-DCP-L460M2-86
L460M2-86
vpe3-s-l460m2-86

ANVER’S Standard Vacuum Lifters offer efficient material handling solutions by promoting functionality, safety, and ergonomic operations for a wide variety of applications and materials. Standard lifting frames are built to order from stock using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms, and vacuum cups selected.

Basic features on ANVER’s Standard Horizontal Vacuum Lifters include: vacuum leakage sensor and warning system; attach/release slide valve with safety lock; and locking hand knobs on the adjustable vacuum pad, slide assemblies, and crossarms (when applicable).

ANVER Vacuum Lifters comply fully with and meet the standards of US ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as complying with OSHA and most European requirements.

The L460M2-86 two pad lifting frames are ideal for handling carbon steel and stainless steel sheets and plates with a capacity up to 4600 lb (2086 kg). The type of vacuum lifter – Mechanical, Air, or Electric – paired with the number of pads used will depend on your application needs. Foam pads are not available for mechanical vacuum generators.

Contact ANVER for more information, or fill out a Lifter Info/Quote Request Form and a Sales Engineer will respond to your request shortly.

*Lifting frame shown with vacuum generator and/or optional accessories, not included. Unit weight does not include optional equipment.


Standard Lifting Frames with Rubber Vacuum Seals Specifications

Compatible Vacuum Generators
Air, Electric or Battery* Electric Battery* Electric Battery*
VPF-57-AIR_190x129 VPE1-GEN2_190x275 BAE1-GEN2_190x213 VPE3-GEN2_400X467
VPF-57-Series VPE1-GEN3-Series BAE1-GEN3-Series VPE3-GEN3-Series BAE3-GEN3-Series
Request For Quote
Lifting Frame NumberL460M2-86
Rated Load Capacity [lbs (kg)]4600 (2087)
Unit Weight [lbs (kg)]205 (93 kg
A Pad Diameter [in. (mm)]24 (610)
B Lifting Frame Headroom [in. (mm)]11 (279)
C Beam Length [in. (mm)]86 (2184)
D1 Hardware Mtg. Centers [in. (mm)]9 (229)
D2 Inner Alternate Hardware Mtg. Centers [in. (mm)]12 (305)
D3 Outer Alternate Hardware Mtg. Centers [in. (mm)]22.38 (568)
E Pad Distances Max. [in. (mm)]103.5 (2629)
E Pad Distances Min. with M250M [in. (mm)]49 (1245)
E Pad Distances Min. with VPF-57HD [in. (mm)]49 (1245)
E Pad Distances Min. with VPE1-H [in. (mm)]49 (1245)
E Pad Distances Min. with VPE3-S [in. (mm)]57 (1448)
Maximum Sheet Size [ft (M)]12 x 6 (3.7 x 1.8)
Pad NumberVP235MQ
Optional Parking Stands72000038
 

*Battery powered vacuum generators are only recommended when handling non-porous loads.
**Derate lifting frame to 4400 lbs (1996) capacity when using a VPF-57-Series generator.

Various plate sizes can be handled by adjusting the vacuum pad positions on the beam

Vacuum pads in fully extended position to handle maximum plate size.

Vacuum pads moved inwards to handle shorter plate.

 

Installation General Information Safety
Support/Service Options and Accessories Request for Quote
 
 

13600050 A